Course detail

Building Physics I

FAST-AH05Acad. year: 2010/2011

Thermal protection of buildings deals with the protection of buildings against an influence of otdoor climate changes. The assessment of thermal properties of building constructions and energy conscious design limit technical defects and deficiencies and give the possibility for indoor thermal comfort and low-energy consumption in buildings.

Language of instruction

Czech

Number of ECTS credits

2

Mode of study

Not applicable.

Department

Institute of Building Structures (PST)

Learning outcomes of the course unit

By attending the course the students will learn the basics of building desing with respect to given standards and regulations, to meet indoor comfort conditions. The will be taught how to assure low-energy demands of a given building by proper thermal desing of the boundary and divisionary construction, and how to eliminate the possibilities of failures and defects. Also they will be taught how to satisfy the fundamental conditions of building acoustics and day-lighting.

Prerequisites

Basic proceeding of heat transfer, thermal characteristics of solids, humidity of building materials.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Not applicable.

Assesment methods and criteria linked to learning outcomes

Requirements for successful completion of the subject are specified by guarantor’s regulation updated for every academic year.

Course curriculum

1. Fundamentals in heat transfer. Thermal comfort in buildings.
2. Steady state heat flux, U-value determination.
3. Temperature profile for steady state conditions.
4. Influence of a reflective (aluminium) foil on U-value of the structure with non-ventilated air cavity.
5. Surface properties -risk of a surface condensation and mould grows, critical surface temperature and humidity, dew point temperature.
6. Thermal properties of windows and doors.
7. Two dimensional temperature profile of characteristic details (critical places in structures - thermal bridges and corners).
8. Assessment and determination of condensation regions into structures, additional protection against vapour and moisture.
9. Annual balance of condensated and evaporated amounts in the structure.
10. Non-steady state heat flux.
11. Floor categories, surface temperature drop.
12. Thermal stability of rooms.
13. Energy efficiency and energy consumption in buildings.

Work placements

Not applicable.

Aims

Construction must be design for and adjudicate so that not happen to rise of the heat technical deficienty or dificiency. Must be fulfil requirements of regulation No. 137/1998 digest and CSN 73 0540-2:2002 from the viewpoint of the thermal cover of buildings and must be securing of low energy costingness of designing building and requisite thermal microclimate

Specification of controlled education, way of implementation and compensation for absences

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Zákon č.406/2000 Sb., a jeho prováděcí vyhlášky ve znění pozdějších předpisů. 2000. (CS)
Směrnice Evropského parlamentu a rady 2010/31/EU O energetické náročnosti budov (EPBD II). 2002. (CS)
Vaverka, J., a kol.: Stavební tepelná technika a energetika budov. VUTIUM, VUT v Brně, 2006. (CS)

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme B-P-C-APS Bachelor's

    branch APS , 3. year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hours, obligation not entered

Teacher / Lecturer