Ing.

Kateřina Mouralová

Ph.D.

FME, IACS DA – Assistant professor

mouralova@fme.vutbr.cz

Send BUT message

Ing. Kateřina Mouralová, Ph.D.

Publications

  • 2024

    MOURALOVÁ, K.; BENEŠ, L.; FRIES, J. Comparison of MRR of Different WEDM-Machined Materials. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, vol. 132, no. 5-6, ISSN: 0268-3768.
    Detail | WWW

    MOURALOVÁ, K.; BEDNÁŘ, J; BENEŠ, L.; ZAHRADNÍČEK, R.; FRIES, J. Machinability analysis of Albromet W130 copper alloy by WEDM. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, vol. 134, no. 11, p. 5771-5785. ISSN: 0268-3768.
    Detail | WWW

    MOURALOVÁ, K.; ZAHRADNÍČEK, R.; BENEŠ, L.; FRIES, J. Analysis of spherical chips after grinding. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2024, vol. 229, no. 2024, ISSN: 0263-2241.
    Detail | WWW

    MUSELÍKOVÁ, K., MOURALOVÁ, K. Synthetic auxin herbicide 2,4-D and its influence on a model BY-2 suspension. MOLECULAR BIOLOGY REPORTS, 2024, vol. 51, no. 1, ISSN: 0301-4851.
    Detail | WWW

  • 2023

    MOURALOVÁ, K.; BEDNÁŘ, J.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; FRIES, J. Mathematical models for machining optimization of Ampcoloy 35 with different thicknesses using WEDM to improve the surface properties of mould parts. Materials, 2023, vol. 16, no. 1, p. 1-18. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; FRIES, J.; PLICHTA, T. Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil bath. International Journal of Advanced Manufacturing Technology, 2023, vol. 124, no. 10, ISSN: 1433-3015.
    Detail | WWW

    BENEŠ, L.; MOURALOVÁ, K.; MIDULA, P.; SNOW, J.; LYSOŇKOVÁ, I.; PILNAJ, D.; BURDOVÁ, H.; PROKEŠ, T.; ZAHRADNÍČEK, R.; FRIES, J.; KURÁŇ, P.; KUBĚNKA, M. The Corrosion Behavior of WEDM Machined Stainless Steels in a Pyrolysis Environment. Metals, 2023, vol. 13, no. 1, p. 1-17. ISSN: 2075-4701.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; BEDNÁŘ, J.; BENEŠ, L.; POLZER, A.; ZAHRADNÍČEK, R.; FRIES, J.; PROKEŠ, T. Machining of 1.2363 and 1.2343ESR steels using EDM. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, vol. 45, no. 7, ISSN: 1806-3691.
    Detail | WWW

  • 2022

    MOURALOVÁ, K.; BEDNÁŘ, J.; BENEŠ, L.; PLICHTA, T.; PROKEŠ, T.; FRIES, J. Production of precision slots in copper foil using micro EDM. Scientific Reports, 2022, vol. 12, no. 1, p. 1-10. ISSN: 2045-2322.
    Detail | WWW | Full text in the Digital Library

    POLZER, A.; MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; FRIES, J. Comparison of machinability of nickel alloys using WEDM. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2022, vol. 236, no. 9, p. 1268-1281. ISSN: 0954-4054.
    Detail | WWW

    MOURALOVÁ, K.; MICHNA, S; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; PLICHTA, T.; FRIES, J. Experimental analysis of microhardness changes of subsurface areas affected by WEDM. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, vol. 2022, no. 236, p. 1-13. ISSN: 0954-4089.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; FRIES, J. Analysis of the effect of material thickness during the WEDM processon cutting speed, topography and morphology. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2022, vol. 236, no. 15, p. 1-9. ISSN: 0954-4054.
    Detail | WWW

  • 2021

    MOURALOVÁ, K.; POLZER, A.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; KALIVODA, M.; FRIES, J. Multicut technology used in WEDM machining of Mar-M247. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2021, vol. 235, no. 13, p. 1-17. ISSN: 0954-4054.
    Detail | WWW

    MOURALOVÁ, K.; POLZER, A.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; FIALA, Z.; FRIES, J. Machining of B1914 nickel-based superalloy using wire electrical discharge machining. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2021, vol. 235, no. 6, p. 2141-2153. ISSN: 0954-4089.
    Detail | WWW

    POLZER, A.; SEDLÁK, J.; SEDLÁČEK, J.; BENEŠ, L.; MOURALOVÁ, K. Vertical Graphene Growth on AlCu4Mg Alloy by PECVD Technique. Coatings, MDPI, 2021, vol. 11, no. 9, p. 1-13. ISSN: 2079-6412.
    Detail | WWW | Full text in the Digital Library

    ZAHRADNÍČEK, R.; MOURALOVÁ, K.; PROKEŠ, T.; HRABEC, P.; BEDNÁŘ, J. Modelling of Magnetron TiN Deposition Using the Design of Experiment. In Recent Advances in Soft Computing and Cybernetics. Studies in Fuzziness and Soft Computing. Švýcarsko: Springer, 2021. p. 63-70. ISBN: 978-3-030-61659-5. ISSN: 1434-9922.
    Detail | WWW

    PROKEŠ, T.; MOURALOVÁ, K.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; KALIVODA, M. Optimization of Deposition Parameters of a DLC Layer Using (RF) PECVD Technology. In Recent Advances in Soft Computing and Cybernetics. Studies in Fuzziness and Soft Computing. Švýcarsko: Springer International Publishing, 2021. p. 53-62. ISBN: 978-3-030-61659-5. ISSN: 1434-9922.
    Detail | WWW

  • 2020

    MOURALOVÁ, K.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; FRIES, J. Analysis of Machinability and Crack Occurrence of Steels 1.2363 and 1.2343ESR Machined by Die-Sinking EDM. Coatings, MDPI, 2020, vol. 10, no. 4, p. 1-18. ISSN: 2079-6412.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; JANKOVÝCH, R.; FRIES, J.; VONTOR, J. Analysis of the machinability of copper alloy Ampcoloy by WEDM. Materials, 2020, vol. 13, no. 4, p. 1-14. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; HRABEC, P.; BENEŠ, L.; OTOUPALÍK, J.; BEDNÁŘ, J.; PROKEŠ, T.; MATOUŠEK, R. Verification of Fuzzy Inference System for Cutting Speed while WEDM for the Abrasion-Resistant Steel Creusabro by Conventional Statistical Methods. Metals, 2020, vol. 10, no. 1, p. 1-11. ISSN: 2075-4701.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; ZAHRADNÍČEK, R.; BENEŠ, L.; PROKEŠ, T.; HRDÝ, R.; FRIES, J. Study of micro structural material changes after WEDM based on TEM lamella analysis. Metals, 2020, vol. 10, no. 7, p. 1-21. ISSN: 2075-4701.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; FIALA, Z.; FRIES, J. Precision Machining of Nimonic C 263 Super AlloyUsing WEDM. Coatings, MDPI, 2020, vol. 10, no. 6, p. 1-20. ISSN: 2079-6412.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; FRIES, J. Machining of pure molybdenum using WEDM. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2020, vol. 2020, no. 163, p. 1-13. ISSN: 0263-2241.
    Detail | WWW

    MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; ZÁDĚRA, A.; FRIES, J.; KAŇA, V. WEDM used for machining high entropy alloys. Materials, 2020, vol. 13, no. 21, p. 1-20. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; BEDNÁŘ, J.; BENEŠ, L.; HRABEC, P.; KALIVODA, M.; FRIES, J. The analysis of EDM electrodes wear in corners and edges. ARCH CIV MECH ENG, 2020, vol. 20, no. 5, p. 1-17. ISSN: 1644-9665.
    Detail | WWW

  • 2019

    MOURALOVÁ, K.; BENEŠ, L.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; PROKEŠ, T.; MATOUŠEK, R.; HRABEC, P.; FIŠEROVÁ, Z.; OTOUPALÍK, J. Using a Design of Experiment for a Comprehensive Analysis of the Surface Quality and Cutting Speed in WED-Machined Hadfield Steel. Journal of Mechanical Science and Technology, 2019, vol. 33, no. 5, p. 2371-2386. ISSN: 1976-3824.
    Detail | WWW

    MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L. Surface and subsurface layers defects analysis after WEDM affecting the subsequent lifetime of produced components. Arabian Journal for Science and Engineering, 2019, vol. 44, no. 9, p. 7723-7735. ISSN: 2191-4281.
    Detail | WWW

    MOURALOVÁ, K.; ZAHRADNÍČEK, R.; BEDNÁŘ, J. Study of vertical graphene growth on silver substrate based on design of experiment. Diamond and Related Materials, 2019, vol. 97, no. 3, p. 1-10. ISSN: 0925-9635.
    Detail | WWW

    MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; OTOUPALÍK, J.; FIŠEROVÁ, Z.; FIALA, Z. Micro-milling machinability of pure molybdenum. International Journal of Advanced Manufacturing Technology, 2019, vol. 102, no. 9, p. 4153-4165. ISSN: 1433-3015.
    Detail | WWW

    MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L.; SLIWKOVÁ, P. Analysis of subsurface defects occurrence in abrasion resistant Creusabro steel after WEDM including the study of morphology and surface topography. MACHINING SCIENCE AND TECHNOLOGY, 2019, vol. 23, no. 6, p. 1-18. ISSN: 1091-0344.
    Detail | WWW

    MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L.; BEDNÁŘ, J. The Influence of WEDM Parameters Setup on the Occurrence of Defects when Machining Hardox 400 Steel. Materials, 2019, vol. 12, no. 22, p. 1-15. ISSN: 1996-1944.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L. Analysis of the oxide occurrence on WEDM surfaces in relation to subsequent surface treatments. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, vol. 234, no. 3, p. 721-733. ISSN: 0954-4062.
    Detail | WWW

  • 2018

    MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J.; BENEŠ, L.; ZAHRADNÍČEK, R. Analysis of the surface morphology and topography of pure aluminium machined using WEDM. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2018, vol. 2018, no. 114, p. 169-176. ISSN: 0263-2241.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; HOLUB, M. Analysis of Machinability of Pure-Cobalt Disc for Magnetron Deposition Using WEDM. In Mechatronics 2017, Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing. Brno: Springer, Cham, 2018. p. 141-148. ISBN: 978-3-319-65959-6. ISSN: 2194-5357.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; BLAŽÍK, P.; KALIVODA, M.; KOUSAL, P. Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2018, vol. 2018, no. 116, p. 556-564. ISSN: 0263-2241.
    Detail | WWW

    PROKEŠ, T.; MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; ANDRŠ, O. Cutting Insert Wear Analysis Using Industry 4.0. In Mechatronics 2017, Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing. Brno: Springer, Cham, 2018. p. 133-140. ISBN: 978-3-319-65960-2. ISSN: 2194-5357.
    Detail | WWW

    MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; HRABEC, P.; PROKEŠ, T.; MATOUŠEK, R.; FIALA, Z. Quality of Surface and Subsurface Layers after WEDM Aluminum Alloy 7475-T7351 Including Analysis of TEM Lamella. International Journal of Advanced Manufacturing Technology, 2018, vol. 99, no. 9, p. 2309-2326. ISSN: 1433-3015.
    Detail | WWW

    MOURALOVÁ, K.; KLAKURKOVÁ, L.; MATOUŠEK, R.; PROKEŠ, T.; HRDÝ, R.; KAŇA, V. Influence of the Cut Direction through the Semi-Finished Product on the Occurrence of Cracks for X210Cr12 Steel Using WEDM. ARCH CIV MECH ENG, 2018, vol. 18, no. 4, p. 1318-1331. ISSN: 1644-9665.
    Detail | WWW

    MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R.; BEDNÁŘ, J.; HRABEC, P.; PROKEŠ, T.; HRDÝ, R. Analysis of cut orientation through half-finished product using WEDM. Materials and Manufacturing Processes, 2018, vol. 33, no. 16, p. 1-11. ISSN: 1532-2475.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T. Effect of width of kerf on machining accuracy and subsurface layer after WEDM. Journal of Materials Engineering and Performance, 2018, vol. 27, no. 4, p. 1908-1916. ISSN: 1059-9495.
    Detail | WWW

  • 2017

    MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; PROKEŠ, T.; HORYNOVÁ, M. Comparison of morphology and topography of surfaces of WEDM machined structural materials. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2017, vol. 2017, no. 104, p. 12-20. ISSN: 0263-2241.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; KALIVODA, M.; DVOŘÁK, M. Experimental evaluation of the quality of surface after WEDM for steel X210CR12. MM Science Journal, 2017, vol. 2017, no. 2, p. 1778-1782. ISSN: 1803-1269.
    Detail | WWW

    MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R. Defects in the surface layer of pure molybdenum after WEDM. Manufacturing TECHNOLOGY, 2017, vol. 2017, no. 5, p. 786-790. ISSN: 1213-2489.
    Detail | WWW

    MOURALOVÁ, K.; ZAHRADNÍČEK, R.; HRDÝ, R. Using WEDM machine a pure molybdenum welding electrode. MM Science Journal, 2017, vol. 2017, no. 4, p. 2109-2113. ISSN: 1803-1269.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L.; KALIVODA, M. Quality of aluminium alloy surface after WEDM. MM Science Journal, 2017, vol. 2017, no. 1, p. 1679-1682. ISSN: 1803-1269.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T.; BEDNÁŘ, J.; HRABEC, P. Optimalization of WEDM settings parameters when machining pure aluminium using DoE. MM Science Journal, 2017, vol. 2017, no. 4, p. 2105-2108. ISSN: 1803-1269.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; KLAKURKOVÁ, L. Evaluation of total hight of profile of the surface machined by WEDM. MM Science Journal, 2017, vol. 2017, no. 1, p. 1674-1678. ISSN: 1803-1269.
    Detail | WWW

  • 2016

    MOURALOVÁ, K.; ZAHRADNÍČEK, R.; HOUŠKA, P. Evaluation of surface quality of X210CR12 steel for forming tools machined by WEDM. MM Science Journal, 2016, vol. 2016, no. 4, p. 1366-1369. ISSN: 1803-1269.
    Detail | WWW

    KOVÁŘ, J.; MOURALOVÁ, K.; KŠICA, F.; KROUPA, J.; ANDRŠ, O.; HADAŠ, Z. Virtual Reality in Context of Industry 4.0. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 1-7. ISBN: 978-80-01-05882-4.
    Detail | WWW

    MOURALOVÁ, K.; ZAHRADNÍČEK, R.; STREJČEK, J. Surface morphology of iron- rhodium alloy after wire EDM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1613-1616. ISSN: 1803-1269.
    Detail | WWW

    MOURALOVÁ, K.; ZAHRADNÍČEK, R.; HRDÝ, R. Occurrence of globule of debris on surfaces machined by WEDM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1630-1633. ISSN: 1803-1269.
    Detail | WWW

    MOURALOVÁ, K.; KARPÍŠEK, Z.; KOVÁŘ, J.; KLAKURKOVÁ, L. Freeman-Tukey Pseudoquasi-norm for Evaluating the Total Height of Profile Rt after WEDM. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 455-460. ISBN: 978-80-01-05882-4.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Optimization of the Cutting Speed for Ti-6Al-4V Using WEDM Depending on Quality of the Machined Surface. In Mechatronika 2016. 1. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 450-454. ISBN: 978-80-01-05882-4.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R.; MAN, O. Characterisation of 3D Topography of the Surface Machined by Finishing Technologies of WEDM and Grinding. In Mechatronika 2016. Praha: Czech Technical University in Prague, Faculty of Electrical Engineering, 2016. p. 445-449. ISBN: 978-80-01-05882-4.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Application of the genetic algorithm for analysis of input parameters of WEDM technology for TI-6AL- 4V. Mendel Journal series, 2016, vol. 2016, no. 22, p. 271-274. ISSN: 1803-3814.
    Detail

    MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Experimental statistical evaluation of S- parameters on surface machined using WEDM. Mendel Journal series, 2016, vol. 2016, no. 22, p. 261-264. ISSN: 1803-3814.
    Detail

    MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T. Experimental statistical evaluation of surface waviness machined using WEDM. Mendel Journal series, 2016, vol. 2016, no. 22, p. 275-280. ISSN: 1803-3814.
    Detail

    MOURALOVÁ, K.; MATOUŠEK, R.; KOVÁŘ, J.; MACH, J.; KLAKURKOVÁ, L.; BEDNÁŘ, J. Analyzing the surface layer after WEDM depending on the parameters of a machine for the 16MnCr5 steel. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2016, vol. 2016, no. 94, p. 771-779. ISSN: 0263-2241.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; SLIWKOVÁ, P. Evaluation of S-parameters on the surface of titanium alloy Ti-6Al-4V and Al99. 5 machined by WEDM. MM Science Journal, 2016, vol. 2016, no. 6, p. 1537-1540. ISSN: 1803-1269.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; BENEŠ, L.; OSIČKA, K. Effect of wirefeed rate on the morphology of a surface machined using WEDM. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 4, p. 754-757. ISSN: 1213-2489.
    Detail

    MOURALOVÁ, K.; BENEŠ, L.; ZAHRADNÍČEK, R. Study of surface morphology and topography of pure iron machined by WEDM. Manufacturing TECHNOLOGY, 2016, vol. 5, no. 2016, p. 1051-1055. ISSN: 1213-2489.
    Detail

    MOURALOVÁ, K.; KOVÁŘ, J.; KARPÍŠEK, Z.; KOUSAL, P. Optimization machining of titanium alloy Ti-6Al-4V by WEDM with emphasis on the quality of the machined surface. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 6, p. 1326-1331. ISSN: 1213-2489.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; HOUŠKA, P. Experimental evaluation of WEDM machined surface waviness. Acta Polytechnica (on-line), 2016, vol. 56, no. 5, p. 360-366. ISSN: 1805-2363.
    Detail | WWW | Full text in the Digital Library

    MOURALOVÁ, K.; KOVÁŘ, J.; PROKEŠ, T.; BEDNÁŘ, J.; MATOUŠEK, R.; KLAKURKOVÁ, L. Statistical evaluation width of kerf after WEDM by Analysis of Variance. Mendel Journal series, 2016, vol. 2016, no. 22, p. 301-304. ISSN: 1803-3814.
    Detail

    MOURALOVÁ, K.; BEDNÁŘ, J.; KOVÁŘ, J.; MACH, J. Evaluation of MRR after WEDM depending on the resulting surface. Manufacturing TECHNOLOGY, 2016, vol. 2016, no. 2, p. 396-401. ISSN: 1213-2489.
    Detail

    PROKEŠ, T.; MOURALOVÁ, K.; KOVÁŘ, J. Experimental evaluation on the quality of machined surface after turning of material Inconel 625. MM Science Journal, 2016, vol. 2016, no. 6, p. 1617-1620. ISSN: 1803-1269.
    Detail | WWW

    MOURALOVÁ, K.; KOVÁŘ, J.; ZAHRADNÍČEK, R. Machining of highly oriented pyrolitic graphite using WEDM and the resulting quality of the surface. MM Science Journal, 2016, vol. 2016, no. 6, p. 1621-1624. ISSN: 1803-1269.
    Detail | WWW

  • 2015

    MOURALOVÁ, K.; DVOŘÁKOVÁ, J.; DVOŘÁK, J.; KOVÁŘ, J.; KARPÍŠEK, Z.; SLIWKOVÁ, P. Experimental analysis on machinability of aluminium alloy using WEDM technology. MM Science Journal, 2015, vol. 2015, no. 4, p. 722-727. ISSN: 1803- 1269.
    Detail

    MOURALOVÁ, K.; KOVÁŘ, J. QUALITY OF DIMENSIONS ACCURANCY OF COMPONENTS AFTER WEDM DEPENDING ON THE HEAT TREATMENT. MM Science Journal, 2015, vol. 2015, no. 4, p. 790-793. ISSN: 1803- 1269.
    Detail

    MOURALOVÁ, K.; BEDNÁŘ, J.; KOVÁŘ, J. Soft optimization of significant process parameters of WEDM: A result for Steel 16MnCr5. Mendel Journal series, 2015, vol. 2015, no. 21, p. 201-204. ISSN: 1803- 3814.
    Detail

    DVOŘÁK, J.; DVOŘÁKOVÁ, J.; MOURALOVÁ, K. APPLICATION OF FUZZY LOGIC IN ANALYSIS OF INPUT PARAMETERS IN AWJ TECHNOLOGY. Mendel Journal series, 2015, vol. 2015, no. 21, p. 97-104. ISSN: 1803- 3814.
    Detail

    DVOŘÁK, M.; KALIVODA, M.; OSIČKA, K.; MOURALOVÁ, K.; SLANÝ, M. Surface sheets morphology during its division using conventional and unconventional technologies. Journal for technology of plasticity, 2015, vol. 40, no. 1, p. 13-21. ISSN: 0354-3870.
    Detail

    SEDLÁK, J.; DRÁBEK, T.; MOURALOVÁ, K.; CHLADIL, J.; KOUŘIL, K. Machining Issues of Titanium Alloys. International Journal of Metalcasting, 2015, vol. 9, no. 2, p. 41-50. ISSN: 1939- 5981.
    Detail

    BLAŽKOVÁ, V.; SEDLÁK, J.; JAROŠ, A.; FIALA, Z.; MOURALOVÁ, K.; KOLÁŘ, L. Obrábění pokročilých keramických materiálů. Strojírenská technologie, 2015, vol. 20, no. 1, p. 2-11. ISSN: 1211- 4162.
    Detail

  • 2014

    MATOUŠEK, R.; DOBROVSKÝ, L.; MINÁŘ, P.; MOURALOVÁ, K. A Note about Robust Stabilization of Chaotic Hénon System Using Grammatical Evolution. Advances in Intelligent Systems and Computing, 2014, vol. 2014, no. 289, p. 219-228. ISSN: 2194-5357.
    Detail | WWW

  • 2013

    MOURALOVÁ, K.; BEDNÁŘ, J. DETERMINATION OF SIGNIFICANT PROCESS PARAMETERS OF WEDM: Preliminary Study. In MENDEL 2013. Mendel Journal series. ISCC. Brno: BUT, 2013. p. 451-454. ISBN: 978-80-214-4755- 4. ISSN: 1803- 3814.
    Detail

    OSIČKA, K.; KALIVODA, M.; CHLADIL, J.; MOURALOVÁ, K.; OTOUPALÍK, J. MACHINING OF HARDENED BEARING STEELS. Journal PROCEEDINGS IN MANUFACTURING SYSTEMS, 2013, vol. 8, no. 3, p. 171-176. ISSN: 2067-9238.
    Detail

  • 2012

    DVOŘÁK, M.; OSIČKA, K.; KALIVODA, M.; MOURALOVÁ, K. Výroba přístřihu plechu s využitím nekonvenční technologie. Kovárenství, 2012, vol. 44, no. 9, p. 69-72. ISSN: 1213-9289.
    Detail

    DVOŘÁK, M.; OSIČKA, K.; KALIVODA, M.; MOURALOVÁ, K. Using unconventional technology in stamping shop. Journal for technology of plasticity, 2012, vol. 2012, no. 37, p. 59-67. ISSN: 0354-3870.
    Detail

*) Publications are generated once a 24 hours.