Project detail

Processing of electroceramics from nanopowders - II

Duration: 01.04.2009 — 31.12.2009

Funding resources

Ministerstvo školství, mládeže a tělovýchovy ČR - COST

- whole funder (2009-04-01 - 2009-12-31)

On the project

Cílem projektu je rozšíření projektu OC102 (1/2006 – 6/2009) v případě, že akce COST 539 bude prodloužena o 6 měsíců (do 12/2009). Navrhovaný projekt umožní rozšíření experimentů přípravy nových elektrokeramik a jejich dvoustupňového slinování.

Description in English
The main goal of the research at Brno University of Technology will be the investigation of methods for consolidation, shaping, and high-temperature treatment of bulk ceramic nanomaterials of required morphology, chemical and phase composition of grains and grain boundaries, and with a minimum content of pores and defects (dislocations, precipitates, intergranular phases, and structurally and chemically non-stable regions). The research will lead to understanding all the three steps of preparation (consolidation, shaping, and sintering) of bulk ceramics and to development of "new" electroceramic materials with unique properties.

Keywords
nanokeramika, elektrokeramika, keramické procesy, slinování

Key words in English
nanoceramics; electroceramics; ceramic processing; sintering

Mark

OC09015

Default language

Czech

People responsible

Maca Karel, prof. RNDr., Dr. - principal person responsible

Units

Dept. of Ceramics and Polymers
- beneficiary (2009-04-01 - 2009-12-31)

Results

BARTONÍČKOVÁ, E.; WIIK, K.; MACA, K.; LEIN, H.; RUDBERG, E. Synthesis and oxygen transport properties of La0.2Sr0.8Fe1.xTixO3.(x = 0.2, 0.4) intended for syn-gas production. Journal of the European Ceramic Society, 2009, vol. 30, no. 2, p. 605-611. ISSN: 0955-2219.
Detail

MACA, K.; POUCHLÝ, V.; ŽALUD, P. Two-Step Sintering of Oxide Ceramics with Various Crystal Structures. Journal of the European Ceramic Society, 2009, vol. 30, no. 2, p. 583-589. ISSN: 0955-2219.
Detail

POUCHLÝ, V.; MACA, K.: Density MSC; Software for construction of Master Sintering Curve from dilatometric shrinkage data. VUT-FSI, Technická 2, 616 69 Brno. URL: http://ime.fme.vutbr.cz/Files/Software/Density MSC.exe. (software)
Detail

Responsibility: Maca Karel, prof. RNDr., Dr.