Czech Science Foundation - Standardní projekty

- whole funder (2011-01-01 - 2015-12-31)

GAP101/11/1115

Czech

Křupka Ivan, prof. Ing., Ph.D. - principal person responsible

Institute of Machine and Industrial Design
- beneficiary (2011-01-01 - 2015-12-31)

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. The Behavior of Surface Roughness in EHL Contacts Under Small Slide to Roll Ratios. Tribology Letters, 2012, vol. 47, no. 3, p. 357-366. ISSN: 1023-8883.
Detail

ALI, F.; KŘUPKA, I.; HARTL, M. Analytical and experimental investigation on friction of non-conformal point contacts under starved lubrication. MECCANICA, 2012, vol. 45, no. 1, p. 1-9. ISSN: 0025-6455.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Prediction of Real Rough Surface Deformation in Pure Rolling EHL Contact: Comparison with Experiment. TRIBOLOGY TRANSACTIONS, 2012, vol. 55, no. 5, p. 698-704. ISSN: 1040-2004.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Experimental study of artificial features attenuation in rolling/sliding concentrated contacts. In ASME/STLE 2011 International Joint Tribology Conference. 1. Los Angeles, CA, USA: ASME/STLE, 2011. p. 135-137. ISBN: 978-0-7918-5474-7.
Detail

ALI, F.; KŘUPKA, I.; HARTL, M. An Approximate Approach to Predict the Degree of Starvation in Ball–Disk Machine Based on the Relative Friction. TRIBOLOGY TRANSACTIONS, 2013, vol. 56, no. 4, p. 681-686. ISSN: 1040-2004.
Detail

ALI, F.; KRUPKA, I.; HARTL, M. Enhancing the parameters of starved EHL point conjunctions by artificially induced replenishment. Tribology International, 2013, vol. 66, no. 1, p. 134-142. ISSN: 0301-679X.
Detail

KŘUPKA, I.; ŠPERKA, P.; HARTL, M. Effect of surface roughness on lubricant film breakdown and transition from EHL to mixed lubrication. Tribology International, 2016, vol. 100, no. 1, p. 116-125. ISSN: 0301-679X.
Detail

ZIMMERMAN, M.; KŘUPKA, I.; HARTL, M.; HOUŠKA, P. LUBRICATION FILM THICKNESS BEHAVIOR UNDER TRANSIENT SPEED AND LOAD CONDITIONS. In PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE, IJTC 2012. 1. Denver, CO, USA: AMER SOC MECHANICAL ENGINEERS, THREE PARK AVENUE, NEW YORK, NY 10016-5990 USA, 2012. p. 189-191. ISBN: 978-0-7918-4508-0.
Detail

ALI, F.; KANETA, M.; KŘUPKA, I.; HARTL, M. Experimental and numerical investigation on the behavior of transverse limited micro-grooves in EHL point contacts. Tribology International, 2015, vol. 84, no. 4, p. 81-89. ISSN: 0301-679X.
Detail

ALI, F.; KŘUPKA, I.; HARTL, M. Reducing the friction of lubricated nonconformal point contacts by transverse shallow micro-grooves. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, vol. 229, no. 4, p. 420-428. ISSN: 1350-6501.
Detail

ŠPERKA, P.; KŘUPKA, I.; HARTL, M. Evidence of Plug Flow in Rolling-Sliding Elastohydrodynamic Contact. Tribology Letters, 2014, vol. 54, no. 2, p. 151-160. ISSN: 1023-8883.
Detail

ALI, F.; KŘUPKA, I.; HARTL, M. Effects of out-of-contact lubricant channeling on friction and film thickness in starved elastohydrodynamic lubrication point contacts. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, vol. 229, no. 6, p. 1-9. ISSN: 1350-6501.
Detail

OMASTA, M.; KŘUPKA, I.; HARTL, M. Effect of Sliding Direction on EHL Film Shape Under High Sliding Conditions. TRIBOLOGY TRANSACTIONS, 2017, vol. 60, no. 1, p. 87-94. ISSN: 1040-2004.
Detail

ZIMMERMAN, M.; KŘUPKA, I.; HARTL, M.; HOUŠKA, P. EFFECT OF SURFACE TEXTURING ON EHD LUBRICATION FILMS UNDER TRANSIENT SPEED CONDITION. In PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE - 2011. 1. Los Angeles, CA, USA: AMER SOC MECHANICAL ENGINEERS, THREE PARK AVENUE, NEW YORK, NY 10016-5990 USA, 2011. p. 187-189. ISBN: 978-0-7918-5474-7.
Detail