Brno University of Technology - Vnitřní projekty VUT

- whole funder (2012-01-01 - 2014-12-31)

FSI-S-11-29

Czech

Bébar Ladislav, doc. Ing., CSc. - fellow researcher
Bobák Petr, Ing., Ph.D. - fellow researcher
Broukal Jakub, Ing., Ph.D. - fellow researcher
Ferdan Tomáš, Ing., Ph.D. - fellow researcher
Jegla Zdeněk, prof. Ing., Ph.D. - fellow researcher
Jícha Jaroslav, doc. Ing., CSc. - fellow researcher
Juřena Tomáš, Ing., Ph.D. - fellow researcher
Kilkovský Bohuslav, Ing., Ph.D. - fellow researcher
Kropáč Jiří, Ing., Ph.D. - fellow researcher
Létal Tomáš, Ing., Ph.D. - fellow researcher
Lošák Pavel, Ing., Ph.D. - fellow researcher
Nejezchleb Radek, Ing. - fellow researcher
Nekvasil Richard, Ing., Ph.D. - fellow researcher
Pačíska Tomáš, Ing. - fellow researcher
Pavlas Martin, doc. Ing., Ph.D. - fellow researcher
Stehlík Petr, prof. Ing., CSc., dr. h. c. - fellow researcher
Touš Michal, Ing., Ph.D. - fellow researcher
Turek Vojtěch, doc. Ing., Ph.D. - fellow researcher
Vejvoda Stanislav, prof. Ing., CSc. - fellow researcher
Vondál Jiří, Ing., Ph.D. - fellow researcher
Hájek Jiří, doc. Ing., Ph.D. - principal person responsible

Institute of Process Engineering
- internal (2012-01-01 - 2014-12-31)
Faculty of Mechanical Engineering
- beneficiary (2012-01-01 - 2014-12-31)

VONDÁL, J.; HÁJEK, J. Experimental and numerical investigation of swirling non-premixed gas flames in industrial-scale furnace. In Proceedings of the 9th european Conference on Industrial Furnaces and Boilers. Estoril, Portugal (PT): 2011. p. 1-9. ISBN: 978-972-99309-6-6.
Detail

NIESNER, J.; JECHA, D.; STEHLÍK, P. Biogas upgrading technologies: State of art review in european region. Chemical Engineering Transactions, 2013, vol. 35, no. 2013, p. 517-522. ISSN: 1974-9791.
Detail

TUREK, V.; HÁJEK, J.; JEGLA, Z.; STEHLÍK, P. Optimum design of fluid distribution systems in heat exchangers. Asia-Pacific Journal of Chemical Engineering, 2011, vol. 6, no. 5, p. 750-759. ISSN: 1932-2143.
Detail

STEHLÍK, P. Modeling, simulation and optimization in waste/biomass-to-energy processes. Malajsie: UTM, 2011.
Detail

BOBÁK, P.; GALČÁKOVÁ, A.; PAVLAS, M.; KŠENZULIAK, V. Computational Approach for Energy Intensity Reduction of Professional Laundry Care Process. Chemical Engineering Transactions, 2011, vol. 25, no. 1, p. 147-152. ISSN: 1974-9791.
Detail

VONDÁL, J.; HÁJEK, J. Prediction of flow through swirl generator and validation by measured data. In 13th European Turbulence Conference 2011 (ETC13). Journal of Physics: Conference Series. Varšava, Polsko: IOPscience, 2011. p. 1-6. ISBN: 9781622765430. ISSN: 1742-6588.
Detail

KROPÁČ, J.; BÉBAR, L.; PAVLAS, M. Industrial and Hazardous Waste Combustion and Energy Production. Chemical Engineering Transactions, 2012, vol. 28, no. 1, p. 673-678. ISSN: 1974-9791.
Detail

ŠOMPLÁK, R.; PAVLAS, M.; UCEKAJ, V.; POPELA, P. Waste-to-Energy Facility Planning Supported by Stochasting Programming - Part I Introduction. Chemical Engineering Transactions, 2012, vol. 29, no. 1, p. 649-654. ISSN: 1974-9791.
Detail

ŠOMPLÁK, R.; TOUŠ, M.; FERDAN, T.; PAVLAS, M.; POPELA, P. Waste-to-Energy Facility Planning Supported by Stochasting Programming - Part II Model development and application. Chemical Engineering Transactions, 2012, vol. 29, no. 1, p. 739-744. ISSN: 1974-9791.
Detail

HÁJEK, J.; JUŘENA, T. Modelling of 1MW Solid Biomass Combustor: Simplified Balance-Based Bed Model Coupled with Freeboard CFD Simulation. Chemical Engineering Transactions, 2012, vol. 29, no. 1, p. 745-750. ISSN: 1974-9791.
Detail

JECHA, D.; BÉBAR, L.; STEHLÍK, P. Balances of contaminants in flue gas from municipal waste incineration plant. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1057-1062. ISSN: 1974-9791.
Detail

VONDÁL, J.; HÁJEK, J. Swirling flow prediction in model combustor with axial guide vane swirler. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1069-1074. ISSN: 1974-9791.
Detail

BROUKAL, J.; VONDÁL, J.; HÁJEK, J. Experimental and numerical investigation of wall heat fluxes in a gas fired furnace: practicable models for swirling non-premixed combustion. Chemical Engineering Transactions, 2012, vol. 29, no. 2, p. 1399-1404. ISSN: 1974-9791.
Detail

PAVLAS, M.; MAREŠ, M.; UCEKAJ, V.; ORAL, J.; STEHLÍK, P. Studie k nastavení podpory energetického využití odpadů. Odpadové fórum, 2012, roč. 2012, č. 4, s. 10-15. ISSN: 1212-7779.
Detail

PAČÍSKA, T.; JEGLA, Z.; KILKOVSKÝ, B.; REPPICH, M.; TUREK, V. Thermal Analysis of Unconventional Process Condenser Using Conventional Software. In Chemical Engineering Transactions, Vol. 35: Selected Papers of PRES'13. Chemical Engineering Transactions. Milano, Italy: AIDIC Servizi S.r.l., 2013. p. 469-474. ISBN: 978-88-95608-26-6. ISSN: 1974-9791.
Detail

BROUKAL, J.; HÁJEK, J.; SOJKA, P. Experimental Investigations of Effervescent Atomization Using Non-intrusive Techniques. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 1135-1140. ISSN: 1974-9791.
Detail

MÁŠA, V.; BOBÁK, P.; STEHLÍK, P.; KUBA, P. Energy Intensive Process in Professional Laundry Service: Up-to-date Approach. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 259-264. ISSN: 1974-9791.
Detail

VONDÁL, J.; HÁJEK, J. Heat Flux Measurement Methods for Process Furnaces – a Case Study. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 1153-1158. ISSN: 1974-9791.
Detail

JUŘENA, T.; HÁJEK, J. Mathematical Modelling of Grate Combustion: Bed and Freeboard Coupling Issues. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 985-990. ISSN: 1974-9791.
Detail

KROPÁČ, J.; FERDAN, T.; PAVLAS, M. Waste-to-Energy Modelling – Energy Efficiency versus Minimized Environmental Impact. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 901-906. ISSN: 1974-9791.
Detail

ŠOMPLÁK, R.; PAVLAS, M.; POPELA, P.; PROCHÁZKA, V. The Logistic Model for Decision Making in Waste Management. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 817-822. ISSN: 1974-9791.
Detail

JECHA, D.; ELSÄSSER, T.; POHOŘELÝ, M.; PUNČOCHÁŘ, M.; STEHLÍK, P. Thermische Klärschlammbehandlung in der Tschechischen Republik und experimentelle Bestimmung der Emissionen aus der Verbrennung. Chemie-Ingenieur-Technik, 2013, roč. 85, č. 12, s. 1-7. ISSN: 1522-2640.
Detail

JEGLA, Z. Development of Modified Plug-Flow Furnace Model for Identification of Burner Thermal Behaviour. Chemical Engineering Transactions, 2013, vol. 35, no. 2, p. 1195-1200. ISSN: 1974-9791.
Detail

STEHLÍK, P.; JEGLA, Z.; KILKOVSKÝ, B. Possibilities of Intensifying Heat Transfer in Heat Exchangers for High Temperature Applications. Chemical Engineering Transactions, 2013, vol. 35, no. 1, p. 439-444. ISSN: 1974-9791.
Detail

BROUKAL, J.; HÁJEK, J. Validation of an effervescent spray model with secondary atomization and its application to modelling of a large-scale furnace. Applied Thermal Engineering, 2011, vol. 31, no. 13, p. 2153-2164. ISSN: 1359-4311.
Detail