Czech Science Foundation - Standardní projekty

- whole funder (2017-01-01 - 2019-12-31)

17-23578S

Czech

Kala Jiří, prof. Ing., Ph.D. - principal person responsible

Institute of Structural Mechanics
- beneficiary (2016-03-30 - not assigned)

BAJER, M.; BARNAT, J.; VILD, M.; MELCHER, J.; KARMAZÍNOVÁ, M.; PIJÁK, J. Different Cross-Section in Lateral-Torsional Buckling. ce/papers, 2017, vol. 1, no. 2-3, p. 4704-4711. ISSN: 2509-7075.
Detail

NARIMAN, N.; HUŠEK, M.; MOHAMMAD, I.; AHMED, K.; DILSHAD, D.; KHIDR, I. Analysis of stiffness and flexural strength of a reinforced concrete beam using an invented reinforcement system. Frontiers of Structural and Civil Engineering, 2021, vol. 15, no. 2, p. 378-389. ISSN: 2095-2449.
Detail

HUŠEK, M.; KRÁL, P.; KALA, J.; HRADIL, P.; MAŇAS, P. Simulating Randomized Failure of Concrete Targets. In Conference Proceedings of 6th International Conference on Military Technologies 2017. Brno: 2017. p. 303-307. ISBN: 978-1-5090-5667-5.
Detail

KRÁL, P.; HRADIL, P.; HUŠEK, M.; KALA, J.; KALA, Z. Sensitivity Analysis and Optimization as Tools for the Inverse Concrete Material Model Parameter Identification. In AIP Conference Proceedings. AIP Conference Proceedings. 2018. p. 1-4. ISBN: 978-0-7354-1690-1. ISSN: 1551-7616.
Detail

KRÁL, P.; HOKEŠ, F.; HUŠEK, M.; KALA, J.; HRADIL, P. Optimization-Based Inverse Identification of the Parameters of a Concrete Cap Material Model. In World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2017. p. 1-10. ISSN: 1757-899X.
Detail

HUŠEK, M.; KALA, J. How to Get Closer to Reality in Pressure Test Simulations with the SPH Method. International Journal of Mechanics, 2017, vol. 2017, no. 11, p. 226-233. ISSN: 1998-4448.
Detail

KRÁL, P.; HUŠEK, M.; HRADIL, P.; KALA, J.; MAŇAS, P. Identification of Concrete Material Model Parameters Using Optimisation Algorithms. Advances in Military Technology, 2018, vol. 2018, no. 1, p. 33-45. ISSN: 1802-2308.
Detail

HUŠEK, M.; KALA, J.; HOKEŠ, F.; KRÁL, P. Conversion of Fractal Fields into Heterogeneities inside SPH Simulations. In IOP Conf. Series: Materials Science and Engineering of World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium 2017. IOP Conference Series: Materials Science and Engineering. 2017. p. 1-10. ISSN: 1757-8981.
Detail

HOKEŠ, F.; KRÁL, P.; HUŠEK, M.; KALA, J. Study on Identification of Material Model Parameters from Compact Tension Test on Concrete Specimens. In IOP Conf. Series: Materials Science and Engineering of World Multidisciplinary Civil Engineering - Architecture - Urban Planning Symposium 2017. IOP Conference Series: Materials Science and Engineering. 2017. p. 1-10. ISSN: 1757-8981.
Detail

ŠMAK, M.; KALA, J.; HOKEŠ, F. Pinned joints - their design and real behaviour. Proceedings of the Institution of Civil Engineers: Engineering and Computational Mechanics, 2018, vol. 170, no. 4, p. 154-166. ISSN: 1755-0777.
Detail

KRÁL, P.; KALA, J.; HRADIL, P. Studie efektivity a přesnosti optimalizačních algoritmů při inverzní identifikaci hodnot parametrů nelineárního materiálového modelu betonu. In Modelování v mechanice 2018. Ostrava, Česká republika: 2018. s. 1-12. ISBN: 978-80-248-4175-5.
Detail

KRÁL, P.; HRADIL, P.; KALA, J. Evaluation of constitutive relations for concrete modeling based on an incremental theory of elastic strain-hardening plasticity. Computers and Concrete, 2018, vol. 22, no. 2, p. 227-237. ISSN: 1598-818X.
Detail

HUŠEK, M.; KALA, J.; KRÁL, P.; HOKEŠ, F. Using Noise to Generate the Material Structure of Concrete. In AIP Conference Proceedings. AIP Conference Proceedings. 2018. p. 1-4. ISBN: 978-0-7354-1690-1. ISSN: 1551-7616.
Detail

HUŠEK, M.; KRÁL, P.; KALA, J.; HRADIL, P.; MAŇAS, P. Concrete Targets with Heterogeneities under Impact Loading. Advances in Military Technology, 2018, vol. 13, no. 1, p. 107-118. ISSN: 1802-2308.
Detail

HUŠEK, M.; KALA, J. Material structure generation of concrete and its further usage in numerical simulations. STRUCTURAL ENGINEERING AND MECHANICS, 2018, vol. 68, no. 3, p. 335-344. ISSN: 1598-6217.
Detail

KRÁL, P.; HRADIL, P.; KALA, J. Four-Point Bending Test on a High Reinforced Concrete Beam: Nonlinear Numerical Analysis Using Material Parameter Identification. In World Multidisciplinary Civil Engineering. IOP Conference Series: Materials Science and Engineering. 2019. p. 1-9. ISSN: 1757-899X.
Detail

HOKEŠ, F.; KALA, J.; NĚMEC, I. Video analysis of response of reinforced concrete beam to impact loading during drop test. In 4th International Scientific Conference Structural and Physical Aspects of Construction Engineering (SPACE 2019). MATEC Web of Conferences. CEDEX A: EDP Sciences, 2020. p. 1-6. ISSN: 2261-236X.
Detail

JINDRA, D.; HRADIL, P.; KALA, J.; SALAJKA, V. Non linear FEM analysis of composite concrete slab exposed to extreme thermal load. In 17th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2019). AIP conference proceedings. American Institute of Physics Inc., 2020. p. 1-4. ISBN: 978-0-7354-4025-8. ISSN: 0094-243X.
Detail

KRÁL, P.; HRADIL, P.; KALA, J.; KALA, Z.; HOKEŠ, F. Using the inverse identification of parameters of a nonlinear concrete material model for analysis of RC structural element. In AIP Conference Proceedings. AIP Conference Proceedings. 2019. p. 1-4. ISSN: 1551-7616.
Detail

HOKEŠ, F.; KRÁL, P.; TRCALA, M. Modelling uniaxial compression of concrete specimen with utilization of nonlinear material models inside ANSYS and RFEM. In AIP Conference Proceedings. AIP Conference Proceedings. 2019. p. 1-4. ISBN: 978-0-7354-1854-7. ISSN: 1551-7616.
Detail

KRÁL, P.; KALA, J.; HRADIL, P. Study of the efficiency and accuracy of optimisation algorithms within inverse identification of the parameter values of a nonlinear concrete material model. Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava, 2019, vol. 19, no. 2, p. 9-16. ISSN: 1213-1962.
Detail

HOKEŠ, F.; KALA, J.; TRCALA, M.; NĚMEC, I. Implementation of the viscous Drucker-Prager and viscous Lee-Fenves nonlinear material models and finite element benchmarks. In Advances and Trends in Engineering Sciences and Technologies III. 2019. p. 105-111. ISBN: 9780367075095.
Detail

HRADIL, P.; SALAJKA, V.; KALA, J. Requirements of technical standards for the dynamic analysis of the load-bearing structures of footbridges. In MATEC Web of Conferences. MATEC Web of Conferences. Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2017. Francie: EDP Sciences, 2017. p. 01-06. ISSN: 2261-236X.
Detail

SALAJKA, V.; HRADIL, P.; FRÝBORT, D.; GLOCKNER, M. A comparison of spectral values obtained in bridge structures via radar interferometry and numerical calculations. In Conference on Dynamics of Civil Engineering and Transport Structures and Wind Engineering (DYN-WIND). MATEC Web of Conferences. MATEC Web of Conferences. Francie: EDP Sciences, 2017. p. 01-08. ISSN: 2261-236X.
Detail

HUŠEK, M.; KALA, J. Uncertainties in blast simulations evaluated with Smoothed Particle Hydrodynamics method. STRUCTURAL ENGINEERING AND MECHANICS, 2020, vol. 74, no. 6, p. 771-787. ISSN: 1598-6217.
Detail

JINDRA, D.; HRADIL, P.; KALA, J. Optimal adjustment od FE model of concrete slab exposed to impact loading. In MATEC Web of Concerences 313 (Dyn-Wind 2020), 00024 (2020). MATEC Web of Conferences. Slovakia, Vyhne: EDP Sciences, 2020. p. 1-9. ISSN: 2261-236X.
Detail

JINDRA, D.; HRADIL, P.; KALA, J.; KRÁL, P. The Suitable Discretization of Concrete Plate Finite Element Model Exposed to High Velocity Loading. CUTE 2020. Czech Republic, Ostrava: 2020. p. 15-18. ISBN: 978-80-248-4457-2.
Detail

JINDRA, D.; HRADIL, P.; KALA, J. A Comparison of Various FE Modelling Methods of Concrete Slab Exposed to Impact Loads. In 18th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2020). AIP conference proceedings. Greece, Rhodes: AIP Conference Proceedings, 2022. p. 1-5. ISSN: 0094-243X.
Detail

KRÁL, P.; KALA, J.; HRADIL, P. Algorithmization and application of constitutive equations for modeling the plane stress state of concrete. In AIP Conference Proceedings (ICNAAM 2019). AIP conference proceedings. Greece, Rhodes: 2020. p. 1-4. ISBN: 978-0-7354-4025-8. ISSN: 0094-243X.
Detail

KRÁL, P.; HRADIL, P.; KALA, J. Modelling the tensile softening behaviour of concrete in LS-Dyna software. In IOP Conference Series: Materials Science and Engineering (WMCAUS 2020). IOP Conference Series: Materials Science and Engineering. Prague, Czech Republic: IOP Publishing, 2020. p. 1-7. ISSN: 1757-899X.
Detail

KRÁL, P.; HUŠEK, M.; HRADIL, P.; KALA, J.; MAŇAS, P. Optimization of the Material Parameters of the Continuous Surface Cap Model for Concrete. In Conference Proceedings of 6th International Conference on Military Technologies 2017. Brno: 2017. p. 298-302. ISBN: 978-1-5386-1988-9.
Detail