Přístupnostní navigace
E-application
Search Search Close
Project detail
Duration: 01.01.2018 — 31.12.2022
Funding resources
Evropská unie - OP VVV PO1 Excelentní výzkum
- whole funder (2018-01-01 - 2022-12-31)
Mark
OP VVV CZ.02.1.01/0.0/0.0/16_019/0000753
Default language
Czech
People responsible
Astrouski Ilja, Ph.D. - fellow researcherBaláš Marek, doc. Ing., Ph.D. - fellow researcherBartuli Erik, Ing., Ph.D. - fellow researcherBellerová Hana, Ing., Ph.D. - fellow researcherBoháček Jan, doc. Ing., Ph.D. - fellow researcherBrázdil Marian, Ing., Ph.D. - fellow researcherElbl Patrik, Ing. - fellow researcherFiedler Jan, doc. Ing., Dr. - fellow researcherFrantíková Dagmar, Ing. - fellow researcherHvožďa Jiří, Ing. - fellow researcherKalivodová Markéta, Ing. - fellow researcherKracík Petr, Ing., Ph.D. - fellow researcherKratochvíl Pavel, Bc., MPA - fellow researcherKroulíková Tereza, Ing., Ph.D. - fellow researcherKůdelová Tereza, Ing., Ph.D. - fellow researcherKwapinski Witold, Dr. - fellow researcherLachman Jakub, Ing., Ph.D. - fellow researcherLisá Hana, Ing., Ph.D. - fellow researcherMilčák Pavel, Ing. - fellow researcherMusilová Petra, Ing. - fellow researcherNajser Tomáš, Bc. - fellow researcherPohanka Michal, doc. Ing., Ph.D. - fellow researcherPřikrylová Jana, Ing. Bc., Ph.D. - fellow researcherRaudenský Miroslav, prof. Ing., CSc. - fellow researcherSitek Tomáš, Ing., Ph.D. - fellow researcherSvoboda Jiří - fellow researcherŠkorpík Jiří, Ing., Ph.D. - fellow researcherŠnajdárek Ladislav, Ing., Ph.D. - fellow researcherLisý Martin, Ing., Ph.D. - principal person responsible
Units
Dept. of Power Engineering- beneficiary (2018-01-01 - 2022-12-31)Energy Institute- responsible department (2017-12-18 - not assigned)Heat Transfer and Fluid Flow Laboratory- co-beneficiary (2018-01-01 - 2022-12-31)
Results
RAUDENSKÝ, M.; BOHÁČEK, J.; KLAPKA, M. Acoustics Silencer Study. 2018. p. 1-43.Detail
BALÁŠ, M.; LISÝ, M.; MILČÁK, P.; POSPÍŠIL, J. Assessment of four ways of gas purification by biomass gasification. In European Biomass Conference and Exhibition Proceedings. 2018. ETA-Florence Renewable Energies, 2018. p. 688-693. ISBN: 978-88-89407-18-9.Detail
MILČÁK, P.; BALÁŠ, M.; LISÝ, M. The Infuence of the Combustion of Digestate Fuels for Solid Pollutants Emissions. ERIN2018, 12th International Conference for Young Researchers and Ph.D. Students. Oliver Macho. Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology, 2018. p. 46-46. ISBN: 978-80-8106-073-1.Detail
MILČÁK, P.; BALÁŠ, M.; LISÝ, M.; KRACÍK, P.; VAVŘÍKOVÁ, P.; ELBL, P. The Gasification of the Mixture of Digestate and wood in an Atmospheric Fluidized Gasifier. TOP2018, 24th annual International Scientific Conference. M. Horvát. Bratislava: SPEKTRUM STU, 2018. p. 21-21. ISBN: 978-80-227-4835-3.Detail
LISÝ, M.; BALÁŠ, M.; MILČÁK, P.; JECHA, D.; POSPÍŠIL, J. Emissions of particulate matter from agropellets combustion. In European Biomass Conference and Exhibition Proceedings. EUROPEAN BIOMASS CONFERENCE AND EXHIBITION PROCEEDINGS. ETA Florence, 2018. p. 610-615. ISSN: 2282-5819.Detail
VAVŘÍKOVÁ, P.; ELBL, P.; BALÁŠ, M.; LISÝ, M.; MILČÁK, P. Design of Syngas Cleaning by Wet Scrubber. TOP2018, 24th annual International Scientific Conference. M. Horvát. Bratislava: SPEKTRTUM STU, 2018. p. 35-35. ISBN: 978-80-227-4835-3.Detail
ELBL, P.; LISÝ, M.; BALÁŠ, M.; MILČÁK, P.; VAVŘÍKOVÁ, P. Gasification of Biodegradable Wastes. TOP2018, 24th annual International Scientific Conference. M. Horvát. Bratislava: SPEKTRTUM STU, 2018. p. 8-8. ISBN: 978-80-227-4835-3.Detail
KRACÍK, P.; BALÁŠ, M.; LISÝ, M.; POSPÍŠIL, J. Experimental Verification of Impact of Sprinkled Area Length on Heat Exchange Coefficient. Advances in Materials Science and Engineering, 2019, vol. 2019, no. 1, p. 1-7. ISSN: 1687-8434.Detail
BALÁŠ, M.; LISÝ, M.; LISÁ, H. Vlastnosti emisí TZL při termickém zpracování biomasy a BRO. In Vykurovanie 2019. Bratislava: SSTP, 2019. s. 233-236. ISBN: 978-80-89878-41-3.Detail
RAUDENSKÝ, M.; BROŽOVÁ, T.; BARTULI, E. POLYMERIC HOLLOW FIBER HEAT TRANSFER SURFACES FOR SHELL AND TUBE APPLICATION. In ASTFE Digital Library. 4th Thermal and Fluids Engineering Conference. 2019. p. 199-204. ISSN: 2379-1748.Detail
BROŽOVÁ, T.; ASTROUSKI, I.; RAUDENSKÝ, M. The Influence of the Structure of Heat Transfer Surfaces on Polymeric Hollow Fibre Heat Exchangers. ERIN 2019. 1. Brno: 2019. p. 14-14. ISBN: 978-80-214-5733-1.Detail
KROULÍKOVÁ, T.; ASTROUSKI, I.; RAUDENSKÝ, M. Chaotised polymeric hollow fiber bundle as a crossflow heat exchanger in air-water application. ERIN 2019. Brno: 2019. p. 26-26. ISBN: 978-80-214-5733-1.Detail
KROULÍKOVÁ, T.; BROŽOVÁ, T.; BARTULI, E.; RAUDENSKÝ, M. Experimental Verification of Polymeric Distillation Unit. In Engineering Mechanics 2019 Book of Full Texts. Engineering Mechanics .... Praha: Institute of Thermomechanics of the Czech Academy of Sciences, 2019. p. 211-214. ISBN: 978-80-87012-71-0. ISSN: 1805-8248.Detail
TOMAN, F.; KRACÍK, P.; POSPÍŠIL, J. INFLUENCE OF SHEAR STRESS ON THE LIQUID FILM FLOW IN VERTICAL TUBE. 13th International Conference for Young Researchers and PhD Students, Proceedings of the abstracts. 1. Brno: Brno University of Technology, Faculty of Mechanical Engineering, 2019. p. 56-56. ISBN: 978-80-214-5733-1.Detail
RAUDENSKÝ, M. Polymeric hollow fiber heat exchangers. In AIP Conference Proceedings. AIP conference proceedings. American Institute of Physics Inc., 2019. p. 1-5. ISBN: 9780735418585. ISSN: 0094-243X.Detail
BALÁŠ, M.; MILČÁK, P.; LISÝ, M.; KRACÍK, P. Properties of Particles Emitted when Combusting Wood Chips and Agro-materials. In 38TH MEETING OF DEPARTMENTS OF FLUID MECHANICS AND THERMODYNAMICS. AIP Conference Proceedings. AIP Conference Proceedings, 2019. p. 1-4. ISBN: 978-0-7354-1858-5. ISSN: 1551-7616.Detail
VAVŘÍKOVÁ, P.; BALÁŠ, M.; ELBL, P.; LISÝ, M.; MILČÁK, P.; KRACÍK, P.; SITEK, T. Syngas Cleaning Using Wet Scrubber with Water and Organic Liquid. In 27th European Biomass Conference and Exhibition Proceedings. EUROPEAN BIOMASS CONFERENCE AND EXHIBITION PROCEEDINGS. ETA Florence, 2019. p. 881-887. ISBN: 978-88-89407-19-6. ISSN: 2282-5819.Detail
ELBL, P.; BALÁŠ, M.; VAVŘÍKOVÁ, P.; LISÝ, M.; MILČÁK, P. Gaseous Emissions and Solid Particles from the Combustion of Biomass Pellets in 25kW Automatic Boiler. In 27th European Biomass Conference and Exhibition Proceedings. EUROPEAN BIOMASS CONFERENCE AND EXHIBITION PROCEEDINGS. ETA Florenc, 2019. p. 742-748. ISBN: 978-88-89407-19-6. ISSN: 2282-5819.Detail
BOHÁČEK, J.; RAUDENSKÝ, M.; KROULÍKOVÁ, T.; KARIMI-SIBAKI, E. Polymeric hollow fibers: A supercompact cooling of Li-ion cells. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, vol. 146, no. 1, p. 1-12. ISSN: 1290-0729.Detail
LISÝ, M.; ŠPILÁČEK, M.; BALÁŠ, M.; SKÁLA, Z. Evaluation of combustion chamber design using CFD. MM Science Journal, 2019, vol. 2019, no. 6, p. 2877-2882. ISSN: 1803-1269.Detail
KŮDELOVÁ, T.; KROULÍKOVÁ, T. Life Expectancy of Polymeric Hollow Fibre Heat Transfer Surfaces. In Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering 2019. Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering 2019. Lisbon: 2019. p. HTFF 128-1 (HTFF 128-6 p.)ISBN: 978-1-927877-61-6. ISSN: 2369-8136.Detail
BARTULI, E.; KROULÍKOVÁ, T. Testing of Polymeric Hollow Fibre Heat Exchanger with Crossed Hollow Fibres. In Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering 2019. Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering 2019. Lisbon: 2019. p. HTFF 143-1 (HTFF 143-5 p.)ISBN: 978-1-927877-61-6. ISSN: 2369-8136.Detail
BALÁŠ, M.; LISÝ, M.; LISÁ, H.; VAVŘÍKOVÁ, P.; MILČÁK, P.; ELBL, P. Spalné teplo a složení biopaliv a bioodpadů. Brno: VUT v Brně, 2019. s. 6-10.Detail
LISÝ, M.; LISÁ, H.; JECHA, D.; BALÁŠ, M.; KRIŽAN, P. Characteristic Properties of Alternative Biomass Fuels. ENERGIES, 2020, vol. 13, no. 6, p. 1-17. ISSN: 1996-1073.Detail
KŮDELOVÁ, T.; KROULÍKOVÁ, T.; ASTROUSKI, I.; RAUDENSKÝ, M. The Influence of the Fibres Arrangement on Heat Transfer and Pressure Drop of Polumeric Hollow Fibre Heat Exchangers. Acta Polytechnica, 2020, vol. 60, no. 2, p. 122-126. ISSN: 1210-2709.Detail
POLÁČIK, J.; SITEK, T.; POSPÍŠIL, J.; ŠNAJDÁREK, L.; LISÝ, M. Emission of fine particles from residential combustion of wood: Comparison of automatic boiler, manual log feed stove and thermo-gravimetric analysis. Journal of Cleaner Production, 2021, vol. 279, no. 123664, p. 1-9. ISSN: 0959-6526.Detail
BARTULI, E.; KŮDELOVÁ, T.; RAUDENSKÝ, M. Shell-and-tube polymeric hollow fiber heat exchangers with parallel and crossed fibers. Applied Thermal Engineering, 2021, vol. 182, no. 1, p. 1-7. ISSN: 1359-4311.Detail
BARTULI, E.; KŮDELOVÁ, T.; KROULÍKOVÁ, T. Experimentální ověření polymerních výměníků pro kondenzaci spalin. 2020. s. 1-9.Detail
KROULÍKOVÁ, T.; ASTROUSKI, I.; RAUDENSKÝ, M. Chaotised polymeric hollow fibre bundle as a crossflow heat exchanger in air-water applicationChaotised polymeric hollow fibre bundle as a crossflow heat exchanger in air-water application. Acta Polytechnica, 2020, vol. 60, no. 4, p. 318-323. ISSN: 1210-2709.Detail
ASTROUSKI, I.; RAUDENSKÝ, M.; KŮDELOVÁ, T.; KROULÍKOVÁ, T. Fouling of Polymeric Hollow Fiber Heat Exchangers by Air Dust. Materials, 2020, vol. 13, no. 21, p. 1-12. ISSN: 1996-1944.Detail
KROULÍKOVÁ, T.; ASTROUSKI, I.; KŮDELOVÁ, T. Air-side pressure drop of polymeric hollow fibre heat exchangers. Acta Mechanica Slovaca, 2020, vol. 24, no. 2, p. 14-18. ISSN: 1335-2393.Detail
KROULÍKOVÁ, T.; ASTROUSKI, I.; KŮDELOVÁ, T. Pressure drop study of polymeric hollow fiber heat exchangers. In Proceedings of the Engineering Mechnics 2020. Engineering Mechanics .... Brno: Brno University of Technology Institute of Solid Mechanics, Mechatronics and Biomechanics, 2020. p. 314-317. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.Detail
KŮDELOVÁ, T.; BARTULI, E.; STRUNGA, A.; HVOŽĎA, J.; DOHNAL, M. Fully Polymeric Distillation Unit Based on Polypropylene Hollow Fibers. Polymers, 2021, vol. 13, no. 7, p. 1031-1031. ISSN: 2073-4360.Detail
LACHMAN, J.; BALÁŠ, M.; LISÝ, M.; LISÁ, H.; MILČÁK, P.; ELBL, P. An overview of slagging and fouling indicators and their applicability to biomass fuels. FUEL PROCESSING TECHNOLOGY, 2021, vol. 217, no. 1, p. 106804-106804. ISSN: 0378-3820.Detail
BOHÁČEK, J.; RAUDENSKÝ, M.; ASTROUSKI, I.; KARIMI-SIBAKI, E. An optimal design for hollow fiber heat exchanger: A combined numerical and experimental investigation. Energy, 2021, vol. 229, no. 120571, p. 1-14. ISSN: 0360-5442.Detail
KROULÍKOVÁ, T.; ASTROUSKI, I.; RAUDENSKÝ, M.; KŮDELOVÁ, T. Heat Exchanger for Air-Liquid Application with Chaotised Polymeric Hollow Fibres. Applied Thermal Engineering, 2021, vol. 197, no. October 2021, p. 1-9. ISSN: 1359-4311.Detail
MRÁZ, K.; BOHÁČEK, J.; RESL, O.; CHABIČOVSKÝ, M.; KARIMI-SIBAKI, E. Thermal conductivity of porous oxide layer: A numerical model based on CT data. Materials Today Communications, 2021, vol. 28, no. 102705, p. 102705-102705. ISSN: 2352-4928.Detail
KOMÍNEK, J.; ZACHAR, M.; GUZEJ, M.; BARTULI, E.; KOTRBÁČEK, P. Influence of Ambient Temperature on Radiative and Convective Heat Dissipation Ratio in Polymer Heat Sinks. Polymers, 2021, vol. 13, no. 14, p. 1-12. ISSN: 2073-4360.Detail
BULEJKO, P.; BARTULI, E.; KŮDELOVÁ, T.; VANČURA, J. Temperature-dependent burst failure of polymeric hollow fibers used in heat exchangers. ENGINEERING FAILURE ANALYSIS, 2022, vol. 131, no. 105895, p. 1-16. ISSN: 1350-6307.Detail
LISÁ, H.; LISÝ, M.; ELBL, P.; BALÁŠ, M.; ZLEVOROVÁ, T.; MATÚŠ, M. VLIV PROCESU ÚPRAVY VZORKŮ NA ZÁKLADNÍ VLASTNOSTI BIOPALIV. Paliva. Vysoká škola chemicko-technologická v Praze JE JF, 2021, roč. 13, č. 4, s. 141-148. ISSN: 1804-2058.Detail
BALÁŠ, M.; MILČÁK, P.; ELBL, P.; LISÝ, M.; LACHMAN, J.; KRACÍK, P. Gasification of fermentation residue in a fluidized-bed gasifier. Energy, 2022, no. 245, p. 1-8. ISSN: 0360-5442.Detail
LISÝ, M.; BALÁŠ, M.; ELBL, P.; LISÁ, H.; MILČÁK, P. Plant of Mobile Wet Scrubber for Complete Syngas Cleaning. In 29th European Biomass Conference and Exhibition. EUROPEAN BIOMASS CONFERENCE AND EXHIBITION PROCEEDINGS. ETA-Florence Renewable Energies, 2021. p. 463-471. ISBN: 978-88-89407-21-9. ISSN: 2282-5819.Detail
BARTULI, E.; BORKOVEC, O. THERMAL PROPERTIES OF CARDIOPLEGIA HEAT EXCHANGERS. In ENGINEERING MECHANICS 2020 (IM2020). Engineering Mechanics .... BRNO: BRNO UNIV TECHNOL, FAC MECHANICAL ENGINEERING, 2020. p. 82-85. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.Detail
KALIVODOVÁ, M.; BALÁŠ, M.; MILČÁK, P.; LISÁ, H.; LISÝ, M.; LACHMAN, J.; KRACÍK, P.; KRIŽAN, P.; VEJRAŽKA, K. The determination of higher heating value by calculation based on elemental analysis. Paliva. Vysoká škola chemicko-technologická v Praze JE JF, 2022, vol. 14, no. 1, p. 8-20. ISSN: 1804-2058.Detail
ASTROUSKI, I.; KŮDELOVÁ, T.; KALIVODA, J.; RAUDENSKÝ, M. Shear Strength of Adhesive Bonding of Plastics Intended for High Temperature Plastic Radiators. Processes, 2022, vol. 10, no. 5, p. 1-15. ISSN: 2227-9717.Detail
RAUDENSKÝ, M.; KŮDELOVÁ, T.; BARTULI, E.; KROULÍKOVÁ, T.; ASTROUSKI, I. Cooling of flue gas by cascade of polymeric hollow fiber heat exchangers. Case Studies in Thermal Engineering, 2022, vol. 36, no. 1, p. 1-10. ISSN: 2214-157X.Detail
BOHÁČEK, J.; HVOŽĎA, J.; MRÁZ, K.; VAKHRUSHEV, A.; KARIMI-SIBAKI, E. Polymeric hollow fibers: a modular heat exchanger for thermal management systems of battery modules in electric vehicles. EPJ Web of Conferences. EDP Sciences, 2022. p. 1-5. ISSN: 2100-014X.Detail
ELBL, P.; SITEK, T.; LACHMAN, J.; LISÝ, M.; BALÁŠ, M.; POSPÍŠIL, J. Sewage sludge and wood sawdust co-firing: Gaseous emissions and particulate matter size distribution. Energy, 2022, vol. 256, no. 124680, ISSN: 0360-5442.Detail
LACHMAN, J.; LISÝ, M.; BALÁŠ, M.; MATÚŠ, M.; LISÁ, H.; MILČÁK, P. Spent coffee grounds and wood co-firing: Fuel preparation, properties, thermal decomposition, and emissions. RENEWABLE ENERGY, 2022, vol. 193, no. červen, p. 464-474. ISSN: 0960-1481.Detail
RAUDENSKÝ, M.; KŮDELOVÁ, T.; BARTULI, E. HEAT TRANSFER SURFACES MADE OF POLYMERIC HOLLOW FIBERS - FEATURES AND UTILIZATION. In Sborník z konference Proceedings of the Thermal and Fluids Engineering Summer Conference. 4th Thermal and Fluids Engineering Conference. 2022. p. 573-581. ISSN: 2379-1748.Detail
KROULÍKOVÁ, T.; BARTULI, E.; KŮDELOVÁ, T. Polymeric Hollow Fiber Heat Exchangers in Higher Temperatures. In Sborník z 9th International Conference on Fluid Flow. 2022. p. 1-4. ISBN: 9781990800061.Detail
STRUNGA, A.; KROULÍKOVÁ, T.; BARTULI, E.; RAUDENSKÝ, M. Experimental determination of the heat transfer coefficients of shell-and-tube heat exchangers with different hollow fiber arrangements. Journal of Thermal Analysis and Calorimetry, 2022, vol. 147, no. 12.9.2022, p. 14787-14796. ISSN: 1588-2926.Detail
LACHMAN, J.; KALIVODOVÁ, M.; NÁBĚLEK, J.; BALÁŠ, M.; DIVIŠ, P. Emise a vlastnosti prachových částic ze spalování nedřevní biomasy. Energie z biomasy XXII. Brno: Vysoké učení technické v Brně, 2022. s. 67-74. ISBN: 978-80-214-6129-1.Detail
KŮDELOVÁ, T.; RAUDENSKÝ, M.; BARTULI, E. Limits and Use of Polymeric Hollow Fibers as Material for Heat Transfer Surfaces. In Sborník z konference "2022 International Congress on Advanced Materials Sciences and Engineering (AMSE)". 2023. p. 1-6. ISBN: 978-1-6654-4718-8.Detail
ELBL, P.; BALÁŠ, M.; LISÝ, M.; LISÁ, H. Sewage sludge and digestate gasification in an atmospheric fluidized bed gasifier. Biomass Conversion and Biorefinery, 2023, vol. May, no. May, ISSN: 2190-6815.Detail
KOLČAVOVÁ SIRKOVÁ, B.; JEŽÍK, K.; SATERNÍK, F.; BARTULI, E.; HVOŽĎA, J.; RAUDENSKÝ, M. Polymeric hollow fiber heat transfer surface for heat exchanger. Applied Thermal Engineering, 2023, vol. 233, no. 121120, p. 1-6. ISSN: 1359-4311.Detail
HVOŽĎA, J.; BARTULI, E.; RAUDENSKÝ, M. POLYMERIC HOLLOW FIBERS SERVING AS A CROSS-FLOWHEAT EXCHANGER IN LIQUID-TO-GAS APPLICATIONS. In Sborník z konference Proceedings of the Thermal and Fluids Engineering Summer Conference. 4th Thermal and Fluids Engineering Conference. 2023. p. 1473-1479. ISSN: 2379-1748.Detail
MRÁZ, K.; BOHÁČEK, J.; RAUDENSKÝ, M. NUMERICAL SIMULATION OF FLUID FLOW IN HEAT EXCHANGERS WITH COMPLEX GEOMETRY. In Sborník z konference Proceedings of the Thermal and Fluids Engineering Summer Conference. 4th Thermal and Fluids Engineering Conference. Begell House Inc., 2023. p. 457-460. ISSN: 2379-1748.Detail
HVOŽĎA, J.; BARTULI, E.; BOHÁČEK, J. Srovnání kanálků tepelných výměníků různé geometrie při tepelném managementu plochých prvků. 2022.Detail
LANG, F.; BARTULI, E.; HVOŽĎA, J. Zvyšování měrného tepelného toku v tepelném výměníku z polymerních dutých vláken pomocí vytvořeného programu v jazyce Python. 2022. s. 1-6.Detail
KROULÍKOVÁ, T.; MRÁZ, K.; HVOŽĎA, J.; BOHÁČEK, J. Crossflow polymeric hollow fiber heat exchanger: fiber tension effects on heat transfer and airside pressure drop. Journal of Thermal Analysis and Calorimetry, 2024, vol. 149, no. 8, p. 3155-3164. ISSN: 1588-2926.Detail
MILČÁK, P.; BALÁŠ, M.; LISÝ, M.; LISÁ, H.; KRACÍK, P.; LACHMAN, J. Digestate and woodchips gasification: A comparison of different gasifying agents. FUEL PROCESSING TECHNOLOGY, 2024, vol. 258, no. 6, ISSN: 1873-7188.Detail
ZLEVOROVÁ, T.; LACHMAN, J.; PRCHAL, M.; BALÁŠ, M.; ZLÁMALOVÁ GARGOŠOVÁ, H.; LISÝ, M. Torrefied and pyrolyzed pellets and their environmental impact in household heating. RENEWABLE ENERGY, 2024, vol. 237, no. prosinec, ISSN: 0960-1481.Detail
ASTROUSKI, I.; KŮDELOVÁ, T.; BARTULI, E. Thermal performance of shell-and-tube polymeric hollow fiber heat exchangers as oil coolers. Case Studies in Thermal Engineering, 2024, vol. Volume 63, no. 105329, p. 1-11. ISSN: 2214-157X.Detail
RAUDENSKÝ, M.; ASTROUSKI, I.; KŮDELOVÁ, T.; VESELÝ, T.: 2019-PHFHE-RG015; Prototyp kondenzačního výměníku na bázi dutých vláken pro testy do teploty 120 °C. Laboratoř přenosu tepla a proudění, FSI, VUT v Brně, Technická 2, Brno. (prototyp)Detail
BARTULI, E.; POHANKA, M.; BOHÁČEK, J.: 2021-PHFHE-RG018; Prototyp výměníku respektujících plné materialové, teplotní a tlakové požadavky technologie pro testy u partnerů projektu. Laboratoř přenosu tepla a proudění, FSI, VUT v Brně, Technická 2, Brno. (prototyp)Detail
BALÁŠ, M.; MILČÁK, P.; LISÝ, M.; LACHMAN, J.; KALIVODOVÁ, M.; ELBL, P.; LISÁ, H.: Reformingový filtr; Testovací jednotka parního reformingu. Laboratoře EU OEI C3. (funkční vzorek)Detail
ELBL, P.; LACHMAN, J.; KRACÍK, P.; LISÝ, M.; BALÁŠ, M.: Dvoustupňový zplyňovač; Dvoustupňový zplyňovací reaktor. VUT v Brně, Fakulta strojního inženýrství, Energetický ústav, za budovou C3. URL: http://www.oei.fme.vutbr.cz/vysledky-vyzkumu.aspx. (funkční vzorek)Detail