Project detail
Development and verification of the light artificial stainless pressure technology in practical conditions in the production of light construction bottom transport
Duration: 1.1.2018 — 31.12.2020
Funding resources
Ministerstvo průmyslu a obchodu ČR - TRIO
On the project
Description in English
The project as such is mainly focused on the possibility of using new technology guarantee accelerated pre-soaking of lightweight artificial aggregate in practical condition of production transport concrete. The conditions of its applicability should be supported by new technology, which aims to solve the problem associated with the high absorption of porous aggregates. A very important part is the verification of the tests and the results within the pilot-setting conditions, before the actual realizations and the use of the results. Our company in cooperation with Tarpo spol. S r.o. Develops new progressive technology for the production of agloporite aggregate. This is a type of lightweight artificial aggregate, which is produced by crushing power and heat ashes on the agglomeration grate. The aim is to support the application of this progressive technology by using products derived from the processing of exclusively secondary and often waste raw inputs.
The developed technology focuses mainly on economically advantageous conditions of application of lightweight artificial aggregates, which greatly reduce their own production costs of lightweight concrete mixtures.
Key words in English
Lightweight artificial aggregates- Progressive technologies- Energy- Lightweight concrete structures- Absorption- Lightweight artificial aggregate- lightweight concrete
Mark
FV30247
Default language
Czech
People responsible
Vymazal Tomáš, doc. Ing., Ph.D. - principal person responsible
Units
Institute of Building Testing
- responsible department (3.7.2017 - not assigned)
Institute of Building Testing
- beneficiary (3.7.2017 - not assigned)
Results
WÜNSCHE, D. Bakalářská práce: Vliv typu rozptýlené výztuže na chování betonových desek. Brno: 2019. s. 1-72.
Detail
KOCÁB, D.; MISÁK, P.; VYMAZAL, T. Stanovení odolnosti betonu proti působení vody a CHRL: metody, vlivy, praxe, problémy. 2018.
Detail
KOCÁB, D.; MISÁK, P.; VYMAZAL, T. Vlastnosti betonu zkoušené v laboratoři nebo na konstrukci – systemizace. 2018.
Detail
Responsibility: Vymazal Tomáš, doc. Ing., Ph.D.