Brno University of Technology - Vnitřní projekty VUT

- whole funder (2019-01-01 - 2020-12-31)

FSI-S-19-6014

Czech

Bučková Katrin, Ing. - fellow researcher
Cherepanov Maksym, Ing. - fellow researcher
Jaroš Aleš, Ing., Ph.D. - fellow researcher
Mouralová Kateřina, Ing., Ph.D. - fellow researcher
Ohnišťová Petra, Ing., MSc. Ph.D. - fellow researcher
Olina Anna, Ing. - fellow researcher
Polzer Aleš, Ing., Ph.D. - fellow researcher
Sedlák Josef, doc. Ing., Ph.D. - fellow researcher
Slaný Martin, Ing., Ph.D. - fellow researcher
Sliwková Petra, Ing., Ph.D. - fellow researcher
Trčka Tomáš, Ing., Ph.D. - fellow researcher
Varhaník Matúš, Ing., Ph.D. - fellow researcher
Žídek Jan, Ing. - fellow researcher
Píška Miroslav, prof. Ing., CSc. - principal person responsible

Institute of Manufacturing Technology
- co-beneficiary (2019-01-01 - 2021-12-31)
Dept. of Machining Technology
- internal (2019-01-01 - 2021-12-31)
Faculty of Mechanical Engineering
- beneficiary (2019-01-01 - 2021-12-31)

PÍŠKA, M.; BUČKOVÁ, K. Advanced knee implants for the third millenium. Journal of Material Sciences & Enginering, 2019, vol. 8, no. March 2019, p. 20-21. ISSN: 2169-0022.
Detail

MAJERIK, J; BARENYI, I.; POKORNY, Z.; SEDLAK, J.; NEUMANN, V.; DOBROCKY, D.; JAROS, A.; KRBATA, M.; JAMBOR, J.; KUSENDA, R.; SAGAN, M.; PROCHAZKA, J. Analysis of the OCHN3MFA steel in terms of cutting forces and cutting material flank wear mechanisms in hard turning processes. Bulletin of the Polish Academy of Sciences: Technical Sciences, 2021, vol. 69, no. 6, p. 1-8. ISSN: 2300-1917.
Detail

PÍŠKA, M.; VNUKOVÁ, Z. Aplikace polymerů – tribologické a energetické účinky na tváření závitů v zušlechtěné oceli. Praha: Česká strojnická společnost, 2022. s. 1-12.
Detail

VOPAT, T.; SAHUL, M.; HARŠÁNI, M.; VORTEL, O.; ZLÁMAL, T. The Tool Life and Coating-Substrate Adhesion of AlCrSiN-Coated Carbide Cutting Tools Prepared by LARC with Respect to the Edge Preparation and Surface Finishing. Micromachines, 2020, vol. 11, no. 2, p. 1-18. ISSN: 2072-666X.
Detail

MAJERIK, J.; DUBOVSKÁ, R.; JAMBOR, J.; ČEP, R.; KRATOCHVÍL, J.; KOUŘIL, K. Experimental Investigation into Wear and Tool Life of Milling Cutter PVD Coated Carbide Inserts While Armox 500 Steel Hard Milling. Tehnicki Vjesnik-Technical Gazette, 2018, vol. 25, no. 6, p. 1603-1610. ISSN: 1848-6339.
Detail

PECHOUŠEK, J.; KUZMANN, E.; VONDRÁŠEK, R.; OLINA, A.; VRBA, V.; KOUŘIL, L.; INGR, T.; KRÁL, P.; MASHLAN, M. Successive Grinding and Polishing Effect on the Retained Austenite in the Surface of 42CrMo4 Steel. Metals, 2022, vol. 12, no. 1, p. 1-13. ISSN: 2075-4701.
Detail

PÍŠKA, M.; SLIWKOVÁ, P.; VNUKOVÁ, Z.; PETRENEC, M.; SEDLÁKOVÁ, E. Exquisite Energy Savings at Cold Metal Forming of Threads through the Application of Polymers. Polymers, 2022, vol. 14, no. 6, p. 1-17. ISSN: 2073-4360.
Detail

DOBROCKÝ, D.; SEDLÁK, J.; JOSKA, Z.; PROCHÁZKA, J.; POKORNÝ, Z.; STUDENÝ, Z. Influence of Machining Parameters on the Surface Quality of Technical Plastics. ECS Transaction, 2021, vol. 105, no. 1, p. 381-389. ISSN: 1938-6737.
Detail

PÍŠKA, M.; HOLKOVÁ, K. ON THE EFFECT OF ADVANCED PVD COATING ON PERFORMANCE OF CUTTING DIES IN AUSTENITIC STEEL. In Proceedings of the 34th DAAAM International Symposium. 1. Vienna: DAAAM, 2023. p. 16-25. ISBN: 978-3-902734-20-4.
Detail

PÍŠKA, M.; BUČKOVÁ, K. Analysis of machined electron beam treated Ti6Al4V-ELI implant surfaces. Advanced Materials Letters, 2019, vol. Volume 10, no. 6, p. 381-385. ISSN: 0976-3961.
Detail

MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L.; SLIWKOVÁ, P. Analysis of subsurface defects occurrence in abrasion resistant Creusabro steel after WEDM including the study of morphology and surface topography. MACHINING SCIENCE AND TECHNOLOGY, 2019, vol. 23, no. 6, p. 1-18. ISSN: 1091-0344.
Detail

PÍŠKA, M. Advanced knee implants for the third millennium. Journal of Material Sciences & Enginering. UK London: OMICS International, 2019. p. 1 (1 s.). ISSN: 2169-0022.
Detail

MOURALOVÁ, K.; PROKEŠ, T.; BENEŠ, L. Analysis of the oxide occurrence on WEDM surfaces in relation to subsequent surface treatments. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, vol. 234, no. 3, p. 721-733. ISSN: 0954-4062.
Detail

ZEMČÍK, O.; SEDLÁK, J. Application of Linear Optimization on Parameters of 3D FDM Print. TEHNIČKI VJESNIK - TECHNICAL GAZETTE, 2019, vol. 26, no. 4, p. 1164-1170. ISSN: 1330-3651.
Detail

PÍŠKA, M.; BUČKOVÁ, K. On the SLM and EBM of Ti-6Al-4V ELI alloy for advanced knee arthroplasty. CARDIFF: BONE RESEARCH SOCIETY and BRITISH ORTHOPAEDIC RESEARCH SOCIETY, 2019. p. 92-92.
Detail

PÍŠKA, M.; BUČKOVÁ, K. On the SLM and EBM of Ti-6Al-4V ELI alloy for advanced knee arthroplasty. Cardiff: British Orthopaedics Research Society, 2019. p. 25-25.
Detail

OHNIŠŤOVÁ, P.; PÍŠKA, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; PETRENEC, M. A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading. In Materials Structure & Micromechanics of Fracture (MSMF9). 1. Brno: Vutium, 2019. p. 124-124. ISBN: 978-80-214-5760-7.
Detail

OHNIŠŤOVÁ, P.; PÍŠKA, M.; PETRENEC, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P. Fatigue Life of 7475-T7351 Aluminum After Local Severe Plastic Deformation Caused by Machining. Materials, 2019, vol. 12, no. 21, p. 1-23. ISSN: 1996-1944.
Detail

OLINA, A.; PÍŠKA, M.; PETRENEC, M.; HERVOCHES, C.; BERAN, P.; PECHOUŠEK, J.; KRÁL, P. Assessment of Retained Austenite in Fine Grained Inductive Heat Treated Spring Steel. Materials, 2019, vol. 12, no. 24, p. 1-17. ISSN: 1996-1944.
Detail

OHNIŠŤOVÁ, P.; PÍŠKA, M.; DLUHOŠ, J.; HORNÍKOVÁ, J.; ŠANDERA, P.; PETRENEC, M. A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading. In Procedia Structural Integrity. Procedia Structural Integrity. Elsevier, 2019. p. 469-474. ISSN: 2452-3216.
Detail

MOURALOVÁ, K.; BENEŠ, L.; PROKEŠ, T.; BEDNÁŘ, J.; ZAHRADNÍČEK, R.; JANKOVÝCH, R.; FRIES, J.; VONTOR, J. Analysis of the machinability of copper alloy Ampcoloy by WEDM. Materials, 2020, vol. 13, no. 4, p. 1-14. ISSN: 1996-1944.
Detail

KUPČÁK, R.; ZOUHAR, J.; JANDA, J. Application of composite materials in sports optics. In TRANSFER 2019. 2019. Trenčín: Trenčianska univerzita Alexandra Dubčeka v Trenčíně, 2019. p. 105-116. ISBN: 978-80-8075-889-9.
Detail

SEDLÁK, J.; VOCÍLKA, O.; SLANÝ, M.; CHLADIL, J.; POLZER, A.; VARHANÍK, M. Desing and Production of Eye Prosthesis Using 3D Printing. MM Science Journal, 2020, vol. 2020, no. 3, p. 3806-3812. ISSN: 1803-1269.
Detail

ROBL, J.; SEDLÁK, J.; POKORNÝ, Z.; ŇUKSA, P.; BARÉNYI, I.; MAJERÍK, J. Analysis of advanced additive technology in direct metal laser sintering and precision casting method. Bulletin of the Polish Academy of Sciences: Technical Sciences, 2020, vol. 68, no. 1, p. 109-118. ISSN: 2300-1917.
Detail

PÍŠKA, M.; SLIWKOVÁ, P. ANALYSIS OF FORCES INDUCED BY COATED CUTTING TOOLS AT WET AND DRY GROOVING OF HARDENED STEEL. MM Science Journal, 2020, vol. 2020, no. 3, p. 3794-3799. ISSN: 1803-1269.
Detail

PÍŠKA, M.; BUČKOVÁ, K. EBM – průlomová technologie výroby exponovaných kovových součástí 3D tiskem. MM Průmyslové spektrum. Technicko-ekonomický dvouměšíčník, 2020, roč. 2020, č. 4, s. 42-45. ISSN: 1211-6653.
Detail

POLZER, A.; ŠEBESTA, V.; TRČKA, T. 5-Axis Dry Milling of Bottom of Pocket by Ball and Circle-Segment End Mills. MM Science Journal, 2020, vol. 2020, no. 1, p. 3740-3744. ISSN: 1805-0476.
Detail

SEDLÁK, J.; CHLADIL, J.; ČERNÝ, M.; POLZER, A.; VARHANÍK, M.; DOBROCKÝ, D.; JOSKA, Z.; POKORNÝ, Z. Determination of mechanical properties of materials used for 3D printing. Manufacturing TECHNOLOGY, 2020, vol. 20, no. 2, p. 237-243. ISSN: 1213-2489.
Detail

MAJERÍK, J.; BARÉNYI, I.; SEDLÁK, J.; KUSENDA, R.; ECKERT, M. Microstructural analysis of examined 33NiCrMoV15 steel and investigation of its nanomechanical properties after machining. Manufacturing TECHNOLOGY, 2020, vol. 20, no. 1, p. 72-77. ISSN: 1213-2489.
Detail

KUPČÁK, R.; ZOUHAR, J. Application of composite materials in sports optics. Manufacturing TECHNOLOGY, 2020, vol. 20, no. 2, p. 200-209. ISSN: 1213-2489.
Detail

POLZER, A.; VANČURA, T.; TRČKA, T. New Developed Software for Processing and Analysing of the Cutting Forces Records Verified when Machining by Modern Circle-Segment End Mills. In IOP Conference Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering. 968. Galati: IOP Publishing Ltd, 2020. p. 1-11. ISSN: 1757-8981.
Detail

GREGOR, L.; ZOUHAR, J.; KUPČÁK, R.; VARHANÍK, M.; SEDLÁK, J. Design and stiffness Distribution analysis of motorcycle swingarm made of carbon fiber composites. In ENGINEERING MECHANICS 2020. 2020. Brno: Brno University of Technology, 2020. p. 162-165. ISBN: 978-80-214-5896-3.
Detail

ZOUHAR, J.; SLANÝ, M.; SEDLÁK, J.; JOSKA, Z.; POKORNÝ, Z.; BARÉNYI, I.; MAJERÍK, J.; POLZER, A. APPLICATION OF FLAX HYBRID COMPOSITE ON THE HIGH PERFORMANCE ELECTRIC PERSONAL WATERCRAFT. BOOK OF ABSTRACTS. 2021. Braga: SCIENCENTRIS, 2021. p. 391-392. ISBN: 978-989-54808-5-2.
Detail

BUMBÁLEK, M.; JOSKA, Z.; POKORNÝ, Z.; SEDLÁK, J.; MAJERÍK, J.; NEUMANN, V.; KLÍMA, K. Cyclic Fatigue of Dental NiTi Instruments after Plasma Nitriding. Materials, 2021, vol. 14, no. 9, p. 1-11. ISSN: 1996-1944.
Detail

VARHANÍK, M., PÍŠKA, M. THE MACHINABILITY OF INC 718 BY CERAMIC INSERTS. MM Science Journal, 2021, vol. June 2021, no. 2, p. 4483-4490. ISSN: 1805-0476.
Detail

ZOUHAR, J.; FIALA, Z.; JOSKA, Z. Mechanical Properties of Flax and Hybrid Composite Materals. Polymer Composites 2021 - Proceedings. First. Prague: Czech technical University in Prague, 2021. p. 74-79. ISBN: 978-80-01-06897-7.
Detail

KRBAŤA, M.; MAJERÍK, J.; BARÉNYI, I.; ECKERT, M.; SEDLÁK, J.; ČEP, R.; SAMARDŽIĆ, I. Dilatometric Analysis of Cooling Curves for High Strength Steel X155CrMoV12. Metalurgija, 2022, vol. 61, no. 1, p. 193-196. ISSN: 0543-5846.
Detail

KRBAŤA, M.; MAJERÍK, J.; BARÉNYI, I.; ECKERT, M.; ČEP, R.; SEDLÁK, J.; SAMARDŽIĆ, I. Experimental Determination of Continuous Cooling Transformation Diagram for High Strength Steel X155CrMoV12. Metalurgija, 2022, vol. 61, no. 1, p. 185-188. ISSN: 0543-5846.
Detail

GREGOR, L.; ZOUHAR, J.; MÍŠA, J.; KUPČÁK, R.; SEDLÁK, J. Design and validation of motorcycle single side swingarm made of CFRP using photogrammetry. Polymer Composites 2021 - Proceedings. First. Prague: Czech technical University in Prague, 2021. p. 12-17. ISBN: 978-80-01-06897-7.
Detail

KUPČÁK, R.; ZOUHAR, J.; GREGOR, L. Precision Bonding of CFRP Parts With Application In Sport Optics. Polymer Composites 2021 - Proceedings. First. Prague: Czech Technical University in Prague, 2021. p. 29-34. ISBN: 978-80-01-06897-7.
Detail

PÍŠKA, M.; KOLOMÝ, Š. ON tHE EFFECTIVE SUBSTITUTION OF TURNING BY PERIPHERAL MILLING. Vienna, Austria: DAAAM International, 2021. p. 1-6.
Detail

PÍŠKA, M.; KOLOMÝ, Š. ON THE EFFECTIVE SUBSTITUTION OF TURNING BY PERIPHERAL MILLING. In Proceedings of the 32nd DAAAM International Symposium. 1. Vienna: DAAAM, 2021. p. 16-21. ISBN: 978-3-902734-33-4.
Detail

PÍŠKA, M.; BUČKOVÁ, K.; GILÍK, V.; KEPRDA, J.; Vysoké učení technické v Brně, Antonínská 548/1, 602 00 Brno, Veveří, Česká republika¨- 50%, GSP - High Tech Saws, s.r.o., Hlavní 438, 768 32 Zborovice, Česká republika - 25% ASTRA MOTOR spol. s r.o., Firemní 703/1, 619 00 Brno, Horní Heršpice, Česká republika - 25%: Přípravek pro uspořádání pilových kotoučů v omílacím a leštícím stroji. 34482, užitný vzor. (2020)
Detail

PÍŠKA, M.; MADAJ, M.; VUT v Brně: Cutting Tool. EP 2 946 863 B1, patent. (2019)
Detail

PÍŠKA, M.; BUČKOVÁ, K.; VUT v Brně: Souprava pro aplikaci kloubní náhrady. 309024, patent. (2021)
Detail

PÍŠKA, M.: Střihadlo 2020/1/NAD05; Střihadlo pro testování řeivosti břitů pro vlákna s průměrem nad 0,5 mm. Technická 2, C2. (funkční vzorek)
Detail

PÍŠKA, M.: Střihadlo 2020/2/POD05; Ruční střihadlo pro testování řeivosti břitů pro vlákna s průměrem pod 0,5 mm. Technická 2, C2 301. (funkční vzorek)
Detail

PÍŠKA, M.; BUČKOVÁ, K.: KaMi Implant; Prototyp nového kolenního implantátu k PV 2020-459. A1/1521. URL: https://www.fme.vutbr.cz/fakulta/aktuality/68086. (prototyp)
Detail

VANČURA, T.; POLZER, A.; TRČKA, T.: Software pro filtrování z dynamometru; Software pro automatizaci zpracování a analýzu silových záznamů frézování. A1/1541, Technická 2896/2, 616 69, Brno. URL: https://ust.fme.vutbr.cz/obrabeni/?page=produkty. (software)
Detail

PÍŠKA, M.: European Advanced Material Congress 2018. Stockholm (20.08.2018)
Detail