Project detail

Analýza tvářitelnosti a svařitelnosti materiálů vyrobených 3D tiskem kovů drátovou metodou

Duration: 01.03.2020 — 28.02.2023

Funding resources

Brno University of Technology - Vnitřní projekty VUT

- whole funder (2020-01-01 - 2021-12-31)

On the project

3D tisk kovů je a bude i v budoucnu nástrojem pro prototypovopou výrobu pro každé odvětví strojírenství, a to jako náhrada stávajících technologií výroby či renovací nástrojů, přípravků i výrobků. Problémem je současná neznalost struktury a vlastností takto zpracovávaných materiálů, což se projevuje mj. i při formulování materiálových modelů numerických simulací. Podstata projektu tedy spočívá v realizaci 3D tisku a analýze tvářitelnosti a svařitelnosti navařených materiálů.

Mark

FSI-S-20-6336

Default language

Czech

People responsible

Forejt Milan, prof. Ing., CSc. - fellow researcher
Harant Martin, Ing., Ph.D. - fellow researcher
Izák Josef, Ing. - fellow researcher
Kopečný Adam, Ing. - fellow researcher
Sigmund Marian, Ing., Ph.D., IWE - fellow researcher
Řiháček Jan, Ing., Ph.D. - principal person responsible

Units

Institute of Manufacturing Technology
- co-beneficiary (2020-01-01 - 2022-12-31)
Dept. of Metal Forming and Plastics
- internal (2020-01-01 - 2022-12-31)
Dept. of Welding Technology and Surface Treatment
- internal (2020-01-01 - 2022-12-31)
Faculty of Mechanical Engineering
- beneficiary (2020-01-01 - 2022-12-31)

Results

ŘIHÁČEK, J.; PETERKOVÁ, E.; CÍSAŘOVÁ, M.; KUBÍČEK, J. Comparison of FEM and FVM for the Numerical Simulation of Forging Process. MM Science Journal, 2020, vol. 2020, no. 1, p. 3734-3739. ISSN: 1805-0476.
Detail

ŘIHÁČEK, J.; CÍSAŘOVÁ, M.; PETERKOVÁ, E. The Effect of Additive Manufacturing on the Utility Properties of the Reducing Valve Rezistor. Manufacturing TECHNOLOGY, 2024, vol. 24, no. 3, p. 429-439. ISSN: 1213-2489.
Detail

ŘIHÁČEK, J.; CÍSAŘOVÁ, M.; PETERKOVÁ, E.; PODANÝ, K. Influence of the Pressure Die Geometry on The Bent Tube Ovality. MM Science Journal, 2021, vol. 2021, no. 2, p. 4474-4482. ISSN: 1803-1269.
Detail

ŘIHÁČEK, J.; BARTÁK, J.; PODANÝ, K.; CÍSAŘOVÁ, M.; PETERKOVÁ, E. Numerical Analysis and Optimization of the Hook Forging Process. MM Science Journal, 2021, vol. 2021, no. 2, p. 4356-4361. ISSN: 1803-1269.
Detail

SIGMUND, M. ; CICHA, T. REPLACEMENT OF MANUAL GMAW WELDING BY FCAW SEMI-AUTOMATIC WELDING. MM Science Journal, 2021, vol. 2021, no. 2, p. 4342-4347. ISSN: 1803-1269.
Detail

SIGMUND, M.; IZÁK, J. APPLICATION OF WC GRAINS BY DEPOSITION BRAZING. MM Science Journal, 2021, vol. 2021, no. 4, p. 4857-4862. ISSN: 1805-0476.
Detail

SIGMUND, M. Possibilities of Porosity Repairs after Aluminium Alloys Welding. Manufacturing TECHNOLOGY, 2021, vol. 21, no. 4, p. 539-543. ISSN: 1213-2489.
Detail

SIGMUND, M. Heterogenous Weld of Heat Resistant Steel With Cobalt Alloy. Manufacturing TECHNOLOGY, 2021, vol. 21, no. 5, p. 700-705. ISSN: 1213-2489.
Detail

HARANT, M.; ŘIHÁČEK, J.; MRŇA, L. MANUFACTURING OF SANDWICH PANELS AND ITS VERIFICATION BY NUMERICAL SIMULATION. MM Science Journal, 2021, vol. 2021, no. 4, p. 4797-4802. ISSN: 1803-1269.
Detail

KUNČICKÁ, L.; KOCICH, R.; KAČOR, P.; JAMBOR, M.; JOPEK, M. Influence of Sub Structure Development within Rotary Swaged Al–Cu Clad Conductors on Skin Effect during Transfer of Alternating Current. Materials, 2022, vol. 15, no. 2, p. 1-19. ISSN: 1996-1944.
Detail

ŘIHÁČEK, J.; PETERKOVÁ, E.; CÍSAŘOVÁ, M. Improving Rotary Draw Bending Process by Changing a Geometry of the Pressure Die. Manufacturing TECHNOLOGY, 2021, vol. 21, no. 5, p. 668-681. ISSN: 1213-2489.
Detail

WANG, Z.; CHEN, J.; KOCICH, R.; TARDIF, A.; DOLBNYA, I. P.; KUNČICKÁ, L.; MICHA, J.S.; LIOGAS, K.; MAGDYSYUK, O. A.; SZURMAN, I.; KORSUNSKY, A.M. Grain Structure Engineering of NiTi Shape Memory Alloys by Intensive Plastic Deformation. ACS APPL MATER INTER, 2022, vol. 14, no. 27, p. 31396-31410. ISSN: 1944-8244.
Detail

IZÁK, J.; SIGMUND, M. EXAMINATION OF DEGRADATION FREQUENTLY REPAIRED SHEARING AND FORMING TOOLS. MM Science Journal, 2022, vol. 2022, no. 13, p. 5704-5712. ISSN: 1805-0476.
Detail

KUNČICKÁ, L.; KOCICH, R.; NÉMETH, G.; DVOŘÁK, K.; PAGÁČ, M. Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion. Additive Manufacturing, 2022, vol. 59, no. 1, p. 1-15. ISSN: 2214-8604.
Detail

SIGMUND, M.; SPICHAL, J. Possibilities of reducing the number of welds on rail vehicle doors. Scientific Reports, 2022, vol. 12, no. 1, p. 1-14. ISSN: 2045-2322.
Detail

KUNČICKÁ, L.; KOCICH, R.; JAMBOR, M. Shear strain induced recrystallization/recovery phenomena within rotary swaged Al/Cu composite conductors. MATERIALS CHARACTERIZATION, 2022, vol. 194, no. 112399, ISSN: 1044-5803.
Detail

VILIŠ, J.; POKORNÝ, Z.; ZOUHAR, J.; JOPEK, M. Ballistic Resistance of Composite Materials Tested by Taylor Anvil Test. Manufacturing TECHNOLOGY, 2022, vol. 22, no. 5, ISSN: 1213-2489.
Detail

ŘIHÁČEK, J.; ZEJDA, V.; PETERKOVÁ, E.; CÍSAŘOVÁ, M. Influence of initial hole preparation on properties and limits in hole flanging. MM Science Journal, 2020, vol. 2020, no. 5, p. 4201-4209. ISSN: 1803-1269.
Detail

Responsibility: Řiháček Jan, Ing., Ph.D.