Brno University of Technology - Vnitřní projekty VUT

- whole funder (2020-01-01 - 2021-12-31)

FSI-S-20-6164

Czech

Fuis Vladimír, doc. Ing., Ph.D. - fellow researcher
Halabuk Dávid, Ing., Ph.D. - fellow researcher
Hluška Milan, Ing. - fellow researcher
Kovář Jaroslav, Ing., Ph.D. - fellow researcher
Náhlík Luboš, prof. Ing., Ph.D. - fellow researcher
Návrat Tomáš, doc. Ing., Ph.D. - fellow researcher
Oplt Tomáš, Ing., Ph.D. - fellow researcher
Petruška Jindřich, prof. Ing., CSc. - fellow researcher
Pokorný Jan, Ing., Ph.D. - fellow researcher
Sehnal Dominik, Ing. - fellow researcher
Slávik Ondrej, Ing., Ph.D. - fellow researcher
Vaculka Miroslav, Ing. - fellow researcher
Vobejda Radek, Ing., Ph.D. - fellow researcher
Houfek Lubomír, Ing., Ph.D. - principal person responsible

Institute of Solid Mechanics, Mechatronics and Biomechanics
- internal (2020-01-01 - 2022-12-31)
Faculty of Mechanical Engineering
- beneficiary (2020-01-01 - 2022-12-31)

VOBEJDA, R.; ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Associated and non-associated flow rules in the stress state prediction. In Engineering Mechanics 2020. 2020. p. 512-515. ISBN: 978-80-214-5896-3.
Detail

OPLT, T.; VOJTEK, T.; KUBÍČEK, R.; POKORNÝ, P.; HUTAŘ, P. Numerical modelling of fatigue crack closure and its implication on crack front curvature using ΔCTODp. INTERNATIONAL JOURNAL OF FATIGUE, 2023, vol. 171, no. 107570, ISSN: 1879-3452.
Detail

HALABUK, D.; NÁVRAT, T. Determination of Residual Stresses in Cylindrical Components by the Hole-drilling Method. EXPERIMENTAL MECHANICS, 2022, vol. 62, no. 1, p. 87-99. ISSN: 0014-4851.
Detail

KUNOVSKÝ, R.; NÁVRAT, T.; KOČIŠ, J.; VOSYNEK, P.; PINK, T.; JOUKAL, M.; ČIŽMÁŘ, I. Lapidus arthrodesis in combination with arthrodesis of the first metatarsophalangeal joint-biomechanical cadaver study comparing two methods of fixation. Biomedical Papers, 2021, vol. 165, no. X, p. 1-9. ISSN: 1213-8118.
Detail

POKORNÝ, J.; NÁVRAT, T. Calculation of stiffness and damping coefficients of hydrodynamic lemon-bore journal bearings. Proceedings of Computational mechanics 2021. Plzeň: University of West Bohemia, 2021. p. 192-195. ISBN: 978-80-261-1059-0.
Detail

POKORNÝ, J.; NÁVRAT, T. Measured and Calculated Static Equilibrium Position of Water-Lubricated Tilting-Pad Journal Bearing. In Experimental stress analysis 2021, Book of full papers. First edition. Praha: Czech Technical University, 2021. p. 186-192. ISBN: 978-80-01-06885-4.
Detail

HUTAŘ, P.; OPLT, T.; JAMBOR, M.; NÁHLÍK, L. Numerical simulations of semi-elliptical fatigue crack propagation. AIP conference proceedings, 2020, vol. 2309, no. -, p. 1-14. ISSN: 0094-243X.
Detail

KOVÁŘ, J.; FUIS, V.; ČTVRTLÍK, R.; TOMÁŠTÍK, J. The discrepancy between the indentation curves obtained by the finite element method calculation with a Berkovich and a conical indenter. JOURNAL OF MATERIALS RESEARCH, 2022, vol. 37, no. 10, p. 1750-1761. ISSN: 0884-2914.
Detail

BENEŠ, J.; KUNZ, L.; LIŠKA, J.; ŠRÁM, J.; KRBEC, M.; DŽUPA, V.; KŘIVOHLÁVEK, M.; NÁVRAT, T. Determination of stress and displacement on human composite pelvis under static and dynamic loading. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2022, vol. 236, no. 7, p. 951-959. ISSN: 2041-3033.
Detail

KUBÍČEK, R.; OPLT, T.; VOJTEK, T.; NÁHLÍK, L.; HUTAŘ, P. Crack Front Shape Based on Plastic Component of CTOD. 23rd International Scientific Conference APPLIED MECHANICS 2022 – Book of Abstracts. first. Prague: Czech Technical University in Prague, 2022. p. 61-64. ISBN: 978-80-01-06974-5.
Detail

VOJTEK, T.; KUBÍČEK, R.; POKORNÝ, P.; JAMBOR, M.; HUTAŘ, P. CONCEPTUAL PROBLEMS WITH FATIGUE CRACK CLOSURE AND PLASTICITY: INFLUENCE OF CYCLIC SOFTENING. Sixth IJFatigue & FFEMS Joint Workshop Characterisation of Crack/Notch Tip Fields under Static, Dynamic or Cyclic loading - Book of Abstracts. Zagreb: University of Zagreb, 2022. p. 32-32. ISBN: 978-953-7738-83-9.
Detail

HALABUK, D.; NÁVRAT, T. Universal Procedure for Correction of Plasticity Effect in Hole‑Drilling Uniform Residual Stress Measurement. EXPERIMENTAL MECHANICS, 2022, vol. 62, no. 8, p. 1267-1287. ISSN: 0014-4851.
Detail

SNOPIŇSKI, P., APPIAH, A.N.S., HILŠER, O.,KOTOUL, M. Investigation of Microstructure and Mechanical Properties of SLM-Fabricated AlSi10Mg Alloy Post-Processed Using Equal Channel Angular Pressing (ECAP). Materials, 2022, vol. 15, no. 22, p. 7940-7940. ISSN: 1996-1944.
Detail

KOVÁŘ, J.; FUIS, V. Comparison of the results of analytical and FEM stress calculations of the spherical nanoindentation. In Engineering Mechanics 2022. Engineering Mechanics .... Milovy: 2022. p. 217-220. ISBN: 978-80-86246-48-2. ISSN: 1805-8248.
Detail

ŠČERBA, B.; NÁVRAT, T.; VAJDÁK, M.; ČEPELA, J. Artificial intelligence in material testing with digital image correlation. Experimental Stress Analysis 2022 Book of Extended Abstract. First edition. Prague: Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Technická 4, 160 00 Prague 6, 2022. p. 132-133. ISBN: 978-80-01-07010-9.
Detail

SHEN, D.; CHIN, H.; TU, C.; CHIH, J.; VENGLÁŘ, V.; CHEN, K.; KREJSA, J.; VECHET, S. Navigation and Task Planning of a Mobile Robot under ROS Environment: A Case Study Using AutoRace Challenge. In 2021 60th Annual Conference of the Society of Instrument and Control Engineers of Japan. Japan: Institute of Electrical and Electronics Engineers Inc., 2021. p. 612-617. ISBN: 9784907764739.
Detail

PAN, S., CHEN, K.; VĚCHET, S. Design and Control of an Active Stage for Suppressing Motion Induced Vibration in Optical Inspection Systems. In 2022 20th International Conference on Mechatronics - Mechatronika (ME). Pilsen: 2022. p. 1-6. ISBN: 978-1-6654-1040-3.
Detail

KUBÍČEK, R.; VOJTEK, T.; POKORNÝ, P.; HUTAŘ, P. Sensitivity of numerically modelled crack closure to material. Procedia Structural Integrity, 2023, vol. 42, no. 1, p. 911-918. ISSN: 2452-3216.
Detail

VYSKOČIL, R.; PRYMEK, M.; RYBA, L.; SKLENSKY, J.; KOCANDA, J.; LUJC, M.; VOSYNEK, P.; REPKO, M. Vertebral Slip Morphology in Dysplastic Spondylolisthesis as a Criterion for the Choice of the L5/S1 Support (ALIF, PLIF, Fibular Graft) in Surgical Treatment. Symmetry, 2022, vol. 14, no. 7, ISSN: 2073-8994.
Detail

LI, T.; CHEN, K.; VĚCHET, S. Development and demonstration of indoor three-dimensional localization using IR CMOS sensors for Mobile manipulators. SENSORS AND ACTUATORS A-PHYSICAL, 2021, vol. 318, no. 112497, p. 1-17. ISSN: 1873-3069.
Detail

ŠUSTKOVÁ, A.; THOMKOVÁ, B.; ZIKMUND, T.; KAISER, J.; JOUKAL, M.; MARCIÁN, P. The influence of image processing of μ-CT images on mechanical behavior of mandibular trabecular bone structure using micro finite element method. In Materials Structure & Micromechanics of Fracture. Procedia Structural Integrity. Elsevier, 2023. p. 276-281. ISSN: 2452-3216.
Detail

KOVÁŘ, J.; FUIS, V.; ČTVRTLÍK, R. Influencing of the Pile-Up and the Sink-In by the Coefficient of Friction in the Nanoindentation Test. In ENGINEERING MECHANICS 2020. Engineering Mechanics .... Brno: 2020. p. 298-301. ISSN: 1805-8248.
Detail