Návrh projektu je zaměřen na obrábění těžkoobrobitelných materiálů s výjimečnými vlastnostmi. Tyto materiály nachází uplatnění zejména v energetice a leteckém průmyslu, ale také v medicíně a v oblastech s vysokými nároky na jakost a funkční vlastnosti výsledného produktu a prostředí, ve kterém je uvažována jejich aplikace. Aplikovaný výzkum a vývoj bude zaměřen na nové technologie a vývoj řezných nástrojů.

FSI-S-22-7957

Czech

Sedlák Josef, doc. Ing., Ph.D. - principal person responsible
Brabec Martin, Ing. - fellow researcher
Fiala Zdeněk, Ing., Ph.D. - fellow researcher
Gregor Lukáš, Ing. - fellow researcher
Chladil Josef, doc. Ing., CSc. - fellow researcher
Kolomý Štěpán, Ing. - fellow researcher
Kupčák Radim, Ing., Ph.D. - fellow researcher
Lánc Kryštof, Ing. - fellow researcher
Malý Martin, Ing. - fellow researcher
Osička Karel, Ing., Ph.D. - fellow researcher
Píška Miroslav, prof. Ing., CSc. - fellow researcher
Slaný Martin, Ing., Ph.D. - fellow researcher
Sliwková Petra, Ing., Ph.D. - fellow researcher
Varhaník Matúš, Ing., Ph.D. - fellow researcher
Vnuková Zuzana, Ing. - fellow researcher
Vontor Jakub, Ing. - fellow researcher
Zemčík Oskar, Ing., Ph.D. - fellow researcher
Zouhar Jan, doc. Ing., Ph.D. - fellow researcher

Institute of Manufacturing Technology
- responsible department (11.3.2022 - not assigned)
Institute of Manufacturing Technology
- internal (1.1.2022 - 31.12.2024)
Faculty of Mechanical Engineering
- beneficiary (1.1.2022 - 31.12.2024)

GREGOR, L.; ZOUHAR, J.; KUPČÁK, R. Quantification and Verification of Swingarm Structural characteristics through Numerical Simulation and Photogrammetry. Manufacturing Technology, 2024, vol. 24, no. 5, p. 765-778. ISSN: 2787-9402.
Detail

DRBAL, M.; KOLOMÝ, Š.; SEDLÁK, J.; ZOUHAR, J. Investigation of the tool wear progression in parting technology. Manufacturing Technology Pilsen 2024: Abstracts proceedings. 1. 2024. ISBN: ISBN 978-80-261-1197.
Detail

DRBAL, M.; KOLOMÝ, Š.; SEDLÁK, J.; ZOUHAR, J. APPLICATION OF HIGH FEED MILLING AND ITS IMPACT ON THE ENERGY CONSUMPTION OF THE CUTTING PROCESS. VRSTVY A POVLAKY 2024. 21. M-PRESS s.r.o., 2024. ISBN: 978-80-972133-7-4.
Detail

DRBAL, M.; KOLOMÝ, Š.; SEDLÁK, J.; ZOUHAR, J.; VÍTEK, J. Investigation of the Tool Wear Progression in Parting Technology. Manufacturing Technology, 2024, vol. 24, no. 6, ISSN: 2787-9402.
Detail

MALÝ, M.; KOLOMÝ, Š.; KASAN, R.; BARTL, L.; SEDLÁK, J.; ZOUHAR, J. Mechanical Properties, Structure and Machinability of the H13 Tool Steel Produced by Material Extrusion. Manufacturing Technology, 2024, vol. 24, no. 4, p. 608-617. ISSN: 2787-9402.
Detail

KOLOMÝ, Š.; BENČ, M.; HARANT, M.; SEDLÁK, J.; JOPEK, M. Effect of different strain rates on mechanical behavior and structure of Inconel 718 produced by powder bed fusion. International Journal of Mechanics and Materials in Design, 2025, vol. 21, no. 1, ISSN: 1573-8841.
Detail

KOLOMÝ, Š.; JOPEK, M.; SEDLÁK, J.; BENČ, M.; ZOUHAR, J. Study of dynamic behaviour via Taylor anvil test and structure observation of M300 maraging steel fabricated by the selective laser melting method. Journal of Manufacturing Processes, 2024, vol. 125, no. 9, p. 283-294. ISSN: 2212-4616.
Detail

KOLOMÝ, Š.; MALÝ, M.; SEDLÁK, J.; ZOUHAR, J.; SLANÝ, M.; HRABEC, P.; KOUŘIL, K. Machinability of extruded H13 tool steel: Effect of cutting parameters on cutting forces, surface roughness, microstructure, and residual stresses. Alexandria Engineering Journal, 2024, vol. 99, no. July, p. 394-407. ISSN: 2090-2670.
Detail

LÁNC, K.; FIALA, Z.; ZOUHAR, J. Tool life experiment of coated cermet during nodular cast iron turning. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, vol. 133, no. 1, p. 1129-1141. ISSN: 0268-3768.
Detail

VARHANÍK, M.; SEDLÁK, J.; STUDENÝ, Z.; JANIGOVÁ, P.; CHROMJAKOVÁ, F. Tribological Properties of 3D Printed Materials in Total Knee Endoprosthesis. Manufacturing TECHNOLOGY, 2024, vol. 24, no. 2, p. 294-306. ISSN: 1213-2489.
Detail

LÁNC, K.; FIALA, Z. Chatter mitigation in reaming: exploring effective tool holder design. MM Science Journal, 2024, no. JUN 2024, p. 7357-7365. ISSN: 1803-1269.
Detail

RUBI,CS.; PRAKASH, JU.; JULIYANA, SJ.; ČEP, R.; SALUNKHE,S.; KOUŘIL, K.; GAWADE, SR. Comprehensive review on wire electrical discharge machining: a non-traditional material removal process. Frontiers in Mechanical Engineering-Switzerland, 2024, vol. 10, no. 1, ISSN: 2297-3079.
Detail

PÍŠKA, M.; HOLKOVÁ, K. High-temperature lubricity of selected PVD coatings and methods of testing. Oberhof, Germany: DGM - Deutsche Gesellschaft für Materialkunde e.V., Kamillenweg 16-18, 53757 Sankt Augustin, 2024. p. 1-21.
Detail

VILIŠ, J.; VÍTEK, R.; ZOUHAR, J.; STEJSKAL, M.; NEUMANN, V. Experimental Investigation of Armour (Armox-Aramid-UHMWPE). Manufacturing TECHNOLOGY, 2023, vol. 23, no. 6, p. 935-948. ISSN: 1213-2489.
Detail

PÍŠKA, M. Jet jako pila. MM Průmyslové spektrum, 2024, roč. 2023, č. 5, s. 18-19. ISSN: 1212-2572.
Detail

ČEP, R.; SADÍLEK, M.; DVORACEK,T.; CEPOVA, L.; KUSNIR, L.; SNIEHOTTA, P.; KOUŘIL, K. Comparison of Geometrical Accuracy of Machine Tools and Manufactured Parts. In Proceedings of the 26th World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2022. Proceedings of WMSCI 2022. 1. U.S.: International Institute of Informatics and Cybernetics, 2022. p. 71-80. ISBN: 978-1-950492-64-0. ISSN: 2771-0947.
Detail

DRBAL, M.; KOLOMÝ, Š.; ZOUHAR, J.; SEDLÁK, J.; VÍTEK, J. STUDY OF THE WEAR DEVELOPMENT OF REPLACEABLE CUTTING INSERTS FOR PARTING. Vrstvy a povlaky 2023. M-PRESS s.r.o., 2023. p. 15-19. ISBN: 978-80-972133-6-7.
Detail

KOLOMÝ, Š.; DRBAL, M.; SEDLÁK, J.; ZOUHAR, J.; VÍTEK, J. TRENDS IN TESTING OF CUTTING COATINGS, EXPERIMENTAL AND PRACTICAL EXPERIENCES. Vrstvy a povlaky 2023. M-PRESS s.r.o., 2023. p. 33-38. ISBN: 978-80-972133-6-7.
Detail

PÍŠKA, M.; HOLKOVÁ, K. HiPIMS - technologie pro tvorbu odolných povlaků. MM Průmyslové spektrum, 2023, roč. 2023, č. 5, s. 16-17. ISSN: 1212-2572.
Detail

PÍŠKA, M.; HOLKOVÁ, K. ON THE EFFECT OF ADVANCED PVD COATING ON PERFORMANCE OF CUTTING DIES IN AUSTENITIC STEEL. Vienna: DAAAM International, 2023. p. 1-10.
Detail

Responsibility: Sedlák Josef, doc. Ing., Ph.D.