Publication detail

Evaluation of three-point bending fracture tests of concrete specimens with polypropylene fibres via double-K model

HAVLÍKOVÁ, I. MAJTÁNOVÁ, R. ŠIMONOVÁ, H. LÁNÍK, J. KERŠNER, Z.

Original Title

Evaluation of three-point bending fracture tests of concrete specimens with polypropylene fibres via double-K model

Type

conference paper

Language

English

Original Abstract

The fracture-mechanical parameter values of concrete, a quasi-brittle composite material, are determined via evaluation of records of experiments on specimens with stress concentrators. One of the fracture models applicable to concrete is the double-K model. This model combines the concept of cohesive forces acting on the effective crack increment with a criterion based on the stress intensity factor. The outputs of the model are critical crack tip opening displacement and fracture toughness values, including the initiation stress intensity factor value corresponding to the beginning of stable crack propagation. Outputs of three-point bending fracture tests of fibre reinforced concrete obtained using double-K fracture model are presented in this paper. The main aim is the determination and comparison of the above-mentioned parameter values of two types of the composite both without and with polypropylene fibres. Both types of tested composite had the same basic matrix consisting of cement, sand and water. In one case, gravel was used for normal weight concrete, in the other case lightweight aggregates were used for lightweight concrete. Both types of the testing matrix were designed with a similar value of compressive strength. Concretes were reinforced by spread polypropylene fibres of three lengths. There were made eight sets of testing concrete specimens: without fibres, and with fibres of 19 mm, 38 mm and 54 mm length. Dosage of fibres was 9 kg/m3 in all six cases.

Keywords

Double-K fracture model; Initiation toughness; Polypropylene fibre; Three-point bending fracture test

Authors

HAVLÍKOVÁ, I.; MAJTÁNOVÁ, R.; ŠIMONOVÁ, H.; LÁNÍK, J.; KERŠNER, Z.

RIV year

2014

Released

10. 1. 2014

Location

Switzerland

ISBN

978-3-03785-934-6

Book

Materials Structure & Micromechanics of Fracture (MSMF-7)

ISBN

1013-9826

Periodical

Key Engineering Materials (print)

Year of study

592-593

Number

1

State

Swiss Confederation

Pages from

185

Pages to

188

Pages count

4

BibTex

@inproceedings{BUT107505,
  author="Ivana {Havlíková} and Romana Viktória {Majtánová} and Hana {Šimonová} and Jaromír {Láník} and Zbyněk {Keršner}",
  title="Evaluation of three-point bending fracture tests of concrete specimens with polypropylene fibres via double-K model",
  booktitle="Materials Structure & Micromechanics of Fracture (MSMF-7)",
  year="2014",
  journal="Key Engineering Materials (print)",
  volume="592-593",
  number="1",
  pages="185--188",
  address="Switzerland",
  isbn="978-3-03785-934-6",
  issn="1013-9826"
}