Přístupnostní navigace
E-application
Search Search Close
Publication detail
CHOUDHURY, D. CHING, H.A. MAMAT, A.B. ČÍŽEK, J. ABU OSMAN, N.A. VRBKA, M. HARTL, M. KŘUPKA, I.
Original Title
Fabrication and characterization of DLC coated microdimples on hip prosthesis heads
Type
journal article in Web of Science
Language
English
Original Abstract
Diamond like carbon (DLC) is applied as a thin film onto substrates to obtain desired surface properties such as increased hardness and corrosion resistance, and decreased friction and wear rate. Microdimple is an advanced surface modification technique enhancing the tribological performance. In this study, DLC coated microdimples were fabricated on hip prosthesis heads and their mechanical, material and surface properties were characterized. An Electro discharge machining (EDM) oriented microdrilling was utilized to fabricate a defined microdimple array on stainless steel (SS) hip prosthesis heads. The dimpled surfaces were then coated by hydrogenated amorphous carbon (a-C:H) and tetrahedral amorphous carbon (Ta-C) layers by using a magnetron sputtering technology. A preliminary tribology test was conducted on these fabricated surfaces against a ceramic ball in simulated hip joint conditions. It was found that the fabricated dimples were perpendicular to the spherical surfaces and no cutting-tools wear debris was detected inside the individual dimples. The a-C:H and Ta-C coatings increased the hardness at both the dimple edges and the nondimpled region. The tribology test showed a significant reduction in friction coefficient for coated surfaces regardless of microdimple arrays: the lowest friction coefficient was found for the a-C:H samples, followed by Ta-C, as compared to the SS surface.
Keywords
surface modification; micro dimple; diamond like carbon; hip prosthesis; implant interface
Authors
CHOUDHURY, D.; CHING, H.A.; MAMAT, A.B.; ČÍŽEK, J.; ABU OSMAN, N.A.; VRBKA, M.; HARTL, M.; KŘUPKA, I.
RIV year
2014
Released
1. 7. 2015
Publisher
Wiley Periodicals, Inc.
Location
USA
ISBN
1552-4973
Periodical
Journal of biomedical materials research. Part B, Applied biomaterials (Print)
Year of study
103
Number
5
State
United States of America
Pages from
1002
Pages to
1012
Pages count
11
URL
http://onlinelibrary.wiley.com/doi/10.1002/jbm.b.33274/abstract
BibTex
@article{BUT109778, author="CHOUDHURY, D. and CHING, H.A. and MAMAT, A.B. and ČÍŽEK, J. and ABU OSMAN, N.A. and VRBKA, M. and HARTL, M. and KŘUPKA, I.", title="Fabrication and characterization of DLC coated microdimples on hip prosthesis heads", journal="Journal of biomedical materials research. Part B, Applied biomaterials (Print)", year="2015", volume="103", number="5", pages="1002--1012", doi="10.1002/jbm.b.33274", issn="1552-4973", url="http://onlinelibrary.wiley.com/doi/10.1002/jbm.b.33274/abstract" }