Publication detail

Contribution to Deoxidation of Austenitic Steels in a Vacuum Induction Furnace with Carbon

ŠENBERGER, J. PERNICA, V.

Original Title

Contribution to Deoxidation of Austenitic Steels in a Vacuum Induction Furnace with Carbon

Type

journal article in Web of Science

Language

English

Original Abstract

Deoxidation of steel with carbon under reduced pressure is often used for increasing the steel purity. Suitable units for this purpose in foundries are vacuum induction furnaces. Possibilities of increasing the steel purity by deoxidation with carbon in the vacuum induction furnace were studied for the steel for the petrochemistry of specific composition 25Cr/35Ni. The charge composed of the return material only was melted in the air. During melting the charge oxidized and the oxidizing slag formed. Chemical composition of steel, morphology, chemical composition of inclusions in the steel and chemical composition of slag after vacuuming were studied on the basis of samples taken before and after vacuuming. Temperature and oxygen activity were measured before and after vacuuming. Globular inclusions with dominant content of silicon and manganese were observed in steel before and after vacuuming. Contents of total oxygen in steel didn’t change significantly during vacuuming. On the basis of composition of inclusions and measured oxygen activity the activity of Cr2O3 in inclusions was calculated. A slag sample was taken after vacuuming and equilibrium oxygen activity in steel with regard to the Cr2O3 content in the slag was estimated from the slag composition. Equilibrium oxygen activity in relation to the Cr2O3 content in the slag was higher than equilibrium activity measured in the steel. For this reason it is not possible, under the studied conditions, to decrease oxygen content in steel during vacuuming.

Keywords

Vacuum induction furnace, Deoxidation with carbon, Steel for petrochemistry, Oxygen activity, Total oxygen

Authors

ŠENBERGER, J.; PERNICA, V.

RIV year

2015

Released

23. 4. 2015

Publisher

Polish Academy of Sciences

Location

Katowice-Gliwice

ISBN

1897-3310

Periodical

Archives of foundry engineering

Year of study

15

Number

2

State

Republic of Poland

Pages from

105

Pages to

109

Pages count

5

URL

BibTex

@article{BUT120442,
  author="Jaroslav {Šenberger} and Vítězslav {Pernica}",
  title="Contribution to Deoxidation of Austenitic Steels in a Vacuum Induction Furnace with Carbon
",
  journal="Archives of foundry engineering",
  year="2015",
  volume="15",
  number="2",
  pages="105--109",
  doi="10.1515/afe-2015-0048",
  issn="1897-3310",
  url="http://www.afe.polsl.pl/index.php/pl/4101/contribution-to-deoxidation-of-austenitic-steels-in-a-vacuum-induction-furnace-with-carbon.pdf"
}