Publication detail

Rebound Hammer Tests of High-Strength Concrete: Effects of Internal Stress and the Shape of the Impact Area of the Test Specimens on the Measurement Results

BROŽOVSKÝ, J. BODNÁROVÁ, L. BROŽOVSKÝ, J.

Original Title

Rebound Hammer Tests of High-Strength Concrete: Effects of Internal Stress and the Shape of the Impact Area of the Test Specimens on the Measurement Results

Type

journal article in Web of Science

Language

English

Original Abstract

This study examines the factors affecting the results of non-destructive testing of high-strength concrete performed on cubes and on cylinders and examines the processing of calibration relations. Tests were performed with both a type N and a type L Schmidt impact hammer (with a standard impact energy of 2.205 Nm and 0.735 Nm respectively). The assessed factors were internal stress in a specimen and the shape of the impact area. Test specimens were loaded by a force corresponding to the stress in specimen 0%, 10%, 20%, 30%, and 50% from the expected compressive strength. Rebound numbers of the unloaded test specimens were significantly lower than those of the loaded specimens. Therefore, calibration relations and/or correction coefficients processed by measurements of unloaded specimens can be assessed as unsuitable. To process calibration relations, we recommend exerting internal stress in amounts of 15% to 20% of the expected compressive strength of the tested HSC samples. During the determination of the effect of the shape of the test area on the cylindrical test specimen, it was assumed that the rebound numbers on the plane and the round test area would be the same. However, the test results revealed that the rebound numbers in the differently shaped test areas were different. For Schmidt impact hammer type N, the rebound numbers in the round test area were lower by 0.7 units on average, and for Schmidt impact hammer type L, the rebound numbers in the round test area were lower by 1.7 units on average compared to the plane test area rebound numbers.

Keywords

high-strength concrete (HSC), rebound hammer, calibration relations, loading, internal stress

Authors

BROŽOVSKÝ, J.; BODNÁROVÁ, L.; BROŽOVSKÝ, J.

Released

17. 1. 2019

ISBN

0553-6626

Periodical

Periodica Polytechnica - Civil Engineering

Year of study

63

Number

1

State

Hungary

Pages from

215

Pages to

221

Pages count

7

BibTex

@article{BUT155586,
  author="Jiří {Brožovský} and Lenka {Bodnárová} and Jiří {Brožovský}",
  title="Rebound Hammer Tests of High-Strength Concrete: Effects of Internal Stress and the Shape of the Impact Area of the Test Specimens on the Measurement Results",
  journal="Periodica Polytechnica - Civil Engineering",
  year="2019",
  volume="63",
  number="1",
  pages="215--221",
  doi="10.3311/PPci.11966",
  issn="0553-6626"
}