Přístupnostní navigace
E-application
Search Search Close
Publication detail
ŽIŽLAVSKÝ, T. VYŠVAŘIL, M. ROVNANÍKOVÁ, P.
Original Title
Physical-mechanical properties and durability of hydraulic lime-based mortars with non-traditional biopolymers
Type
conference paper
Language
English
Original Abstract
The study focuses on the influence of addition of four different biopolymers in various doses (0.1%, 0.5%, and 1%) on the physical-mechanical properties and durability of NHL 3.5 mortars prepared with constant water/binder ratio and the binder/aggregate ratio of 1 : 2 by weight. The flow table test was carried out and the specimens were tested for flexural and compressive strength at the age of 7 and 28 days. The durability coefficient for the flexural strength was calculated after 15 freezing-thawing cycles. All the admixtures have dosage-dependent slump reducing effect. The strengths were increased in comparison with mortar with no admixture, the most significantly in the case of highest dose of carrageenan and diutan gum. All biopolymers with the exception of diutan gum increased the durability coefficient with increasing dosage. Sodium salt of alginic acid has been found the most effective in the case of durability improvement.
Keywords
natural hydraulic lime, sodium alginate, carrageenan, diutan gum, xanthan gum, compressive strength, flexural strength, durability
Authors
ŽIŽLAVSKÝ, T.; VYŠVAŘIL, M.; ROVNANÍKOVÁ, P.
Released
25. 7. 2019
Publisher
Czech Technical University in Prague
Location
Praha
ISBN
978-80-01-06594-5
Book
Special Concrete and Compoistes 2018
2336-5382
Periodical
Acta Polytechnica CTU Proceedings
Year of study
22
State
Czech Republic
Pages from
150
Pages to
154
Pages count
5
URL
https://ojs.cvut.cz/ojs/index.php/APP/issue/view/677
BibTex
@inproceedings{BUT157835, author="Tomáš {Žižlavský} and Martin {Vyšvařil} and Pavla {Rovnaníková}", title="Physical-mechanical properties and durability of hydraulic lime-based mortars with non-traditional biopolymers", booktitle="Special Concrete and Compoistes 2018", year="2019", journal="Acta Polytechnica CTU Proceedings", volume="22", pages="150--154", publisher="Czech Technical University in Prague", address="Praha", doi="10.14311/APP.2019.22.0150", isbn="978-80-01-06594-5", issn="2336-5382", url="https://ojs.cvut.cz/ojs/index.php/APP/issue/view/677" }