Přístupnostní navigace
E-application
Search Search Close
Publication detail
ŠIMONOVÁ, H. KUCHARCZYKOVÁ, B. BÍLEK, V. KOCÁB, D.
Original Title
Alkali-activated Slag Mortar Containing Alternative Activator: Long-Term Mechanical Fracture Parameters
Type
journal article - other
Language
English
Original Abstract
This paper deals with the determination of long-term mechanical fracture properties of alkali-activated slag (AAS) mortars with the alternative activator. Waste sludge from the production of waterglass was used as a sole alkaline activator for ground granulated blast furnace slag. Two types of sand were used to prepare two different mortar sets: standardized siliceous CEN sand consisting of three fractions according to EN 196-1 and natural sand with a nominal grain size up to 4 mm. The results of the elastic, fracture and strength parameters for both sets of AAS mortars determined within the time interval of 3 to 650 days of ageing are summarized in the paper. The obtained results show a different trend in the development of the material properties of AAS mortars compared to the ordinary cement-based mortars which should be taken into the account in the material specification for practical application. It seems that the hardening process influencing the mechanical fracture characteristics is more progressive after the age of 28 days.
Keywords
Alkali-activation, fracture, mortar, slag, waste sludge.
Authors
ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; KOCÁB, D.
Released
31. 12. 2020
Publisher
VSB - Technical University of Ostrava, Faculty of Civil Engineering
Location
Ostrava
ISBN
1213-1962
Periodical
Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava
Year of study
2020
Number
2
State
Czech Republic
Pages from
28
Pages to
35
Pages count
8
URL
http://tces.vsb.cz/Home/ArticleDetail/506
BibTex
@article{BUT168019, author="Hana {Šimonová} and Barbara {Kucharczyková} and Vlastimil {Bílek} and Dalibor {Kocáb}", title="Alkali-activated Slag Mortar Containing Alternative Activator: Long-Term Mechanical Fracture Parameters", journal="Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava", year="2020", volume="2020", number="2", pages="28--35", doi="10.35181/tces-2020-0014", issn="1213-1962", url="http://tces.vsb.cz/Home/ArticleDetail/506" }