Publication detail

The effect of strain rate and anisotropy on the formability and mechanical behaviour of aluminium alloy 2024-T3

HARANT, M. VERLEYSEN, P. FOREJT, M. KOLOMÝ, Š.

Original Title

The effect of strain rate and anisotropy on the formability and mechanical behaviour of aluminium alloy 2024-T3

Type

journal article in Web of Science

Language

English

Original Abstract

The present study focuses on the mechanical behaviour and formability of the aluminium alloy 2024-T3 in sheet form with a thickness of 0.8 mm. For this purpose, tensile tests at quasi-static and intermediate strain rates were performed using a universal testing machine, and high strain rate experiments were performed using a split Hopkinson tension bar (SHTB) facility. The material’s anisotropy was investigated by considering seven different specimen orientations relative to the rolling direction. Digital image correlation (DIC) was used to measure specimen deformation. Based on the true stress–strain curves, the alloy exhibited negative strain rate sensitivity (NSRS). Dynamic strain aging (DSA) was investigated as a possible cause. However, neither the strain distribution nor the stress–strain curves gave further indications of the occurrence of DSA. A higher deformation capacity was observed in the high strain rate experiments. The alloy displayed anisotropic mechanical properties. Values of the Lankford coefficient lower than 1, more specifically, varying between 0.45 and 0.87 depending on specimen orientations and strain rate, were found. The hardening exponent was not significantly dependent on specimen orientation and only moderately affected by strain rate. An average value of 0.183 was observed for specimens tested at a quasi-static strain rate. Scanning electron microscopy (SEM) revealed a typical ductile fracture morphology with fine dimples. Dimple sizes were hardly affected by specimen orientation and strain rate.

Keywords

2024-T3; aluminium alloy; high strain rates; anisotropy; mechanical behaviour

Authors

HARANT, M.; VERLEYSEN, P.; FOREJT, M.; KOLOMÝ, Š.

Released

13. 1. 2024

Publisher

MDPI

Location

Basel

ISBN

2075-4701

Periodical

Metals

Year of study

14

Number

1

State

Swiss Confederation

Pages from

1

Pages to

13

Pages count

13

URL

https://www.mdpi.com/2075-4701/14/1/98

Full text in the Digital Library

http://hdl.handle.net/11012/245479

BibTex

@article{BUT186837,
  author="Martin {Harant} and Patricia {Verleysen} and Milan {Forejt} and Štěpán {Kolomý}",
  title="The effect of strain rate and anisotropy on the formability and mechanical behaviour of aluminium alloy 2024-T3",
  journal="Metals",
  year="2024",
  volume="14",
  number="1",
  pages="1--13",
  doi="10.3390/met14010098",
  issn="2075-4701",
  url="https://www.mdpi.com/2075-4701/14/1/98"
}