Publication detail

Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings

ŽLEBEK, T. HODUL, J. DROCHYTKA, R.

Original Title

Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings

Type

conference paper

Language

English

Original Abstract

The objective of presented research was to verify and evaluate whether the treated hazardous waste (HW) can be used as filler in polymer coatings based on epoxy (EP) and polyurethane resin (PUR). The end product created by the incineration of municipal waste and cement dusts from cement kiln bypasses were chosen for solidification. The hazardous waste used was solidified by a homogenisation method using filter fly ash from fluidized bed combustion of lignite and silica flour as the solidifying agents. The aim was to use as much hazardous waste as possible and incorporate it into the polymer matrix of the coatings. The usability of the filler prepared in this way was verified by testing the tensile properties of polymer coatings, the surface hardness and the adhesion to the concrete. The cohesion of the coatings with concrete was observed using a digital optical microscope. It has been found that the PUR-based coatings with HW content show better properties than the coatings containing only the silica flour as a filler.

Keywords

polyurethane; epoxy resin; hazardous waste; solidification; coatings; protection of concrete; mechanical parameters

Authors

ŽLEBEK, T.; HODUL, J.; DROCHYTKA, R.

Released

27. 8. 2021

Publisher

Trans Tech Publications Ltd.

Location

Switzerland

ISBN

978-3-0357-1810-2

Book

Proceedings of the 22nd Conference on the Rehabilitation and Reconstruction of Buildings

Edition

Lenka Mészárosová

ISBN

1013-9826

Periodical

Key Engineering Materials (print)

Year of study

898

State

Swiss Confederation

Pages from

49

Pages to

55

Pages count

7

URL

https://www.scientific.net/KEM.898.49

BibTex

@inproceedings{BUT167922,
  author="Tomáš {Žlebek} and Jakub {Hodul} and Rostislav {Drochytka}",
  title="Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings",
  booktitle="Proceedings of the 22nd Conference on the Rehabilitation and Reconstruction of Buildings",
  year="2021",
  series="Lenka Mészárosová",
  journal="Key Engineering Materials (print)",
  volume="898",
  pages="49--55",
  publisher="Trans Tech Publications Ltd.",
  address="Switzerland",
  doi="10.4028/www.scientific.net/KEM.898.49",
  isbn="978-3-0357-1810-2",
  issn="1013-9826",
  url="https://www.scientific.net/KEM.898.49"
}