Course detail

Fundamentals of Foundry Theory

FSI-POBAcad. year: 2010/2011

The course makes students familiar with the physical properties of molten alloys, their flow in mould channels, and the interactions between the melt and the mould. Models of the nucleation phase of crystallization and of the growth phase form the necessary basis for a purposeful control of the crystallization of castings. The analysis of the processes taking place in a cooling casting is focused on the appearance of stress in the casting and on the effects and possibilities of reducing it.

Language of instruction

Czech

Number of ECTS credits

6

Mode of study

Not applicable.

Guarantor

prof. Ing. Ladislav Zemčík, CSc.

Department

Institute of Manufacturing Technology (ÚST)

Learning outcomes of the course unit

Students will have become familiar with the basic processes taking place while the mould is being filled with molten alloys and when the latter crystallize and cool down to room temperature. Emphasis is on a purposeful control of these processes in order that castings or required properties can be obtained.

Prerequisites

Students must have the knowledge of the thermodynamics and kinetics of phase transformations (diffusion, phase equilibrium diagrams, phase transformations and their effect on structure and properties), thermomechanics (stationary and non-stationary transfer of heat by conduction, internal sources, transfer of heat by convection), and hydromechanics (properties of fluids, equilibrium of forces in fluids at rest, motion of fluids in fields of force).

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Teaching methods depend on the type of course unit as specified in the article 7 of BUT Rules for Studies and Examinations.

Assesment methods and criteria linked to learning outcomes

Awarding the course-unit credit is conditional on attendance at exercises. The examination consists of a written and an oral part. In the written part the knowledge of sets of topics is tested, which the students were made familiar with in lectures. The oral part serves to test individual items of knowledge and to provide for correct marking.

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

The course objective is to make students familiar with the basic processes taking place while the mould is being filled with molten alloys and while these alloys crystallize and cool down to room temperature. The emphasis is on a purposeful control of these processes so that castings of required properties can be obtained.

Specification of controlled education, way of implementation and compensation for absences

Attendance at the exercises is required, being checked by the leader of practicals. In the case of absence from exercises, the leader assigns a topic for independent written work.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Campbell, J.: Castings. 1st ed. Oxford: Butterworth-Heinemann. 1997
Flemings, M.C.: Solidification Processing. 1st ed. New York: McGraw-Hill Book Company. 1974
Karlsson, L.: Modeling in Welding, Hot Powder Forming and Casting. 1st ed. Materials Park, Ohio: ASM International. 1997
Nobuo Sano ed.: Advanced Physical Chemistry for Process Metallurgy. 1st ed. San Diego: Academic Press. 1997

Recommended reading

Slovák, S., Rusín, K.: Theory of casting (in Czech), 1st ed.. Praha: SNTL. 1990
Vilčko, J., Slovák, S.: Casting technology (in Slovak), 1st ed. Praha: SNTL. 1987

Classification of course in study plans

  • Programme N2301-2 Master's

    branch M-SLE , 1 year of study, summer semester, compulsory
    branch M-SLE , 1 year of study, summer semester, compulsory

Type of course unit

 

Lecture

39 hod., compulsory

Teacher / Lecturer

prof. Ing. Ladislav Zemčík, CSc.

Syllabus

1. Hydraulic relations in castings, free flow, flow in sprues and runners of the gating system.
2. Physical properties of molten alloys, laminar and turbulent flow, running quality, melt-wetting of moulds, melt penetration into the mould.
3. Thermodynamics of crystallization, three distinct zones with different grain structures in the macrostructure of castings, a survey of the theories explaining their appearance.
4. The nucleation phase of crystallization, nucleation rate, model of homogeneous nucleation, heterogeneous nucleation on a planar substrate.
5. Models of heterogeneous nucleation in the cavities of refractories.
6. The phase of crystal growth, heat transport at the interface and in the mould/casting system.
7. Transport of mass at the interface, appearance of segregation
8. Constitutional supercooling, morphology of phase interface.
9. Control of metal crystallization, dynamic methods, melt modification, crystallization control in the phase of crystal growth, single crystals.
10. Crystallization of the basic types of foundry alloys.
11. Volume changes during casting solidification and their consequences, heat nodes, concentrated and scattered shrinkage cavities.
12. Cooling of castings from the solidus temperature, volume changes during phase transformation in solid state, metal shrinkage, changes in mechanical properties, appearance of thermal and phase stresses in castings.
13. Effects of state of stress in a cooling casting, appearance of cracks, ruptures and warping in castings, potential reduction of state of stress in castings.

Exercise

12 hod., compulsory

Teacher / Lecturer

doc. Ing. Antonín Záděra, Ph.D.

Syllabus

1. Introduction to metal flow, theory of running property, basic tests of running property
2. Gating systems, their types, calculation of simple gating systems (underpressure, overpressure)
3. Introduction to the measurement of temperature fields, possibilities of measuring by thermocouples, optical pyrometers and thermocamera
4. Casting risering, calculation of modules, evaluation of experiments
5. PC simulation of solidification, prediction of shrinkage cavities, comparison of simulation and experiment
6. Stress and casting deformations, PC simulation of stress