Course detail

Electrical Engineering 1

FEKT-BEL1Acad. year: 2011/2012

Informing about the safety rules necessary for a laboratory exercises. Basic laws and quantities in electrical circuits. Properties of elements of the electrical circuits. Power in electrical circuits. Time-varying behaviors of voltages and currents. Methods of analysis of linear resistor circuits. Basic of nonlinear elements and circuits. Magnetic circuits.

Language of instruction

Czech

Number of ECTS credits

5

Mode of study

Not applicable.

Guarantor

doc. Ing. Jiří Sedláček, CSc.

Department

Department of Theoretical and Experimental Electrical Engineering (UTEE)

Learning outcomes of the course unit

Gaining qualifying grade $4 "worker instructed", necessary according to the notice No. 50/1978 for laboratory works. Knowledge of basic laws and quantities in electrical circuits, properties of electrical circuit elements and their models, power in electrical circuits, time-varying behaviors of voltages and currents. Knowledge of basic methods of analysis of linear resistor circuits and magnetic circuits. Gained knowledge will serve as a grounding in study of following subjects.

Prerequisites

The subject knowledge on the secondary school level is required.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Teaching methods depend on the type of course unit as specified in the article 7 of BUT Rules for Studies and Examinations.

Assesment methods and criteria linked to learning outcomes

Total number of points is 100, including 25 points in two written tests in exersises and 75 points in final exam. All laboratory measurements are obligatory - to obtain credit it is necessary to measure all of laboratory exersises and to obtain 12 from maximum 25 points.
Requirements for completion of a course are: to gain credit and to perform an exam. Minimal necessary achieved total mark to pass this course is 50 points.

Course curriculum

Work and power of electric energy, power matching
Special methods of analyze of electric circuits (method of succesive simplification, superposition, transfiguration, method of source substitution)
Universal methods of analyze of electric circuits (Kirchoff's laws, current loops method, node voltages method, modified node voltages method)
Time variables (classification, characteristic values: maximal, average, rms)
Nonlinear circuits (aproximation of characteristics of components, interpolation, extrapolation, analytic solution, graphical solution, numerical solution)
Magnetic circuits (basic variables and laws, analogy between magnetic and electric circuit, induction, analysis and synthesis of magnetic circuits with coil and with permanent magnet, force of electromagnet)

Work placements

Not applicable.

Aims

The provable instructions of students from safety rules necessary for the laboratory exercises and verification according to the notice No. 50/1978. Offering basic knowledge of electrical engineering and circuit theory needed as a
wider scientific basis of further study. To prepare the students for following courses of specialization in electrical engineering. Numerical exercises extend and improve theoretical knowledge, laboratory measurements help to verify some theory in a practical way.

Specification of controlled education, way of implementation and compensation for absences

The content and forms of instruction in the evaluated course are specified by a regulation issued by the lecturer responsible for the course and updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

BRANČÍK, L. Elektrotechnika 1. Elektrotechnika 1. Brno: FEKT VUT v Brně, 2004. s. 1 ( s.)ISBN: 80-214-2607- 1. (CS)
KALÁB, P.; STEINBAUER, M.; VESELÝ, M. Bezpečnost v elektrotechnice. Brno: Ing. Zdeněk Novotný, CSc, Ondráčkova 105, 628 00 Brno, 2009. s. 1-68. ISBN: 978-80-214-3952- 8. (CS)
SEDLÁČEK, J.; STEINBAUER, M. Elektrotechnika 1 (BEL1) - pracovní sešit. Brno: akademické nakladatelství CERM, s.r.o. Brno, 2008. s. 1 ( s.)ISBN: 978-80-214-3707- 4. (CS)
SEDLÁČEK, J.; STEINBAUER, M.; MURINA, M. Elektrotechnika 1 (BEL1) - laboratorní a počítačová cvičení. Brno: Ing. Zdeněk Novotný, CSc., Ondráčkova 105, 628 00 Brno, 2008. s. 1 ( s.)ISBN: 978-80-214-3706- 7. (CS)
STEINBAUER, M.; KALÁB, P. Bezpečnost v elektrotechnice - pracovní sešit. Brno: CERM Brno, 2007. s. 1-41. (CS)

Recommended reading

MIKULEC, M., HAVLÍČEK, V.: Základy teorie elektrických obvodů. Skriptum ČVUT v Praze, 1997. (CS)
VALSA, J., SEDLÁČEK, J.: Teoretická elektrotechnika I. Skriptum VUT v Brně, 1997. (CS)

Classification of course in study plans

  • Programme EECC Bc. Bachelor's

    branch B-TLI , 1 year of study, winter semester, compulsory
    branch B-EST , 1 year of study, winter semester, compulsory
    branch B-SEE , 1 year of study, winter semester, compulsory
    branch B-MET , 1 year of study, winter semester, compulsory
    branch B-AMT , 1 year of study, winter semester, compulsory

  • Programme EEKR-CZV lifelong learning

    branch EE-FLE , 1 year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

doc. Ing. Miloslav Steinbauer, Ph.D.
doc. Ing. Petr Drexler, Ph.D.
doc. Ing. Jiří Sedláček, CSc.

Syllabus

Qualification in electrical engineering, service and work on electrical devices, instructions for movable supplies and flex lines
Safety instructions for service and work on electrical devices, protection against electrical current injury
Basic quantities and laws in electrical circuits
Basic circuit elements and their models
Power in electrical circuit, power matching
Superposition theorem, simplification method, method of proportional quantities, transfiguration
Direct application of Kirchhoff's laws
Loop current analysis
Nodal voltage analysis
Thévenin and Norton theorems, utilization of circuit duality and reciprocity
Magnetic circuits - basic quantities and laws
Analysis of magnetic circuits, graphic methods, loading line method
Magnetic circuits under alternating magnetization, transformers
Introduction to time-varying currents

Exercise in computer lab

13 hod., compulsory

Teacher / Lecturer

Ing. Dušan Nešpor, Ph.D.
Ing. Michaela Pokludová
Ing. Tomáš Kříž, Ph.D.
Ing. Ksenia Kořínková, Ph.D.
doc. Ing. Jiří Sedláček, CSc.
doc. Ing. Petr Marcoň, Ph.D.
Ing. Radim Kořínek, Ph.D.
Ing. Zdeněk Roubal, Ph.D.
doc. Ing. Petr Drexler, Ph.D.

Syllabus

Basic concepts and terminology for electrical devices.
Wires and clamps marking, types of distribute mains, the first help at electrical current injury.
Test from safety instructions according to the notice No. 50/1978.
Basic circuit elements and their models.
Average and root-mean-square values of alternating current.
Power and power matching.
Superposition theorem, circuit duality and reciprocity.
Simplification method, method of proportional quantities.
Application of Kirchhoff's laws in electrical circuits.
Loop analysis method, nodal analysis method.
Thévenin and Norton theorems.
Basic quantities and units of magnetic circuits.
Methods of analysis of magnetic circuits.

Laboratory exercise

13 hod., compulsory

Teacher / Lecturer

doc. Ing. Miloslav Steinbauer, Ph.D.
Ing. Zoltán Szabó, Ph.D.
Ing. Jan Hrozek
Ing. Radek Myška
Eng. Mouin Al Khaddour
Ing. Martin Čáp, Ph.D.
doc. Ing. Petr Marcoň, Ph.D.
Ing. Pavel Křepelka, Ph.D.
Ing. Zdeněk Roubal, Ph.D.

Syllabus

Basic concepts and terminology for electrical devices.
Wires and clamps marking, types of distribute mains, the first help at electrical current injury.
Test from safety instructions according to the notice No. 50/1978.
REAL SOURCE PARAMETERS MEASUREMENT.
KIRCHHOFF'S LAWS IN ELECTRICAL CIRCUITS AND PROPORTIONAL QUANTITIES METHOD.
METHOD OF SUBSTITUTIONAL SOURCE.
NODE VOLTAGES METHOD.
LOOP CURRENTS METHOD.
PRINCIPLE OF SUPERPOSITION.
POWER TRANSMISSION AND POWER MATCHING.
MAGNETIC FIELD IN AIR GAPE.