Course detail

Accesses and Transports Networks

FEKT-BPTSAcad. year: 2011/2012

Evolution of telecommunication networks. Analogue and digital modulations. Terminals. Access networks. Optical access networks. Local networks LAN. Technology XDSL, HDSL, ADSL. Transport networks. Wide networks WAN, networks Frame Relay. Telephony exchanges. Digital switches S and T. System SS7. Systems EWSD and S12. Internet SIP exchange. Transmission systems. Analysis of total distortion at access and transport networks. Analysis of sampling signal spectrum, spectrum for PAM 1st order and 2nd order. Measuring at digital transmission systems. Higher order digital systems. Technology CISCO for network elements. Basics of Ethernet networks. Setting of CISCO network elements. Switching at LAN networks. Virtual networks VLAN. Protocols ISL and 802.1Q. STP (Spanning Tree Protocol) 802.1d. Routing at IP. Protocol RIP version 2, protocol EIGRP, protocol OSPF. Quality of Service QoS. Classification and calibration. Control and network overload prevention. Shaping and regulation. Multicast transmission and routing IP. Multicast IP addresses, protocol IGMP. Problem finalization. View of access ant transport technologies.
Laboratory:

1. BER measuring CBT course
2. Active network elements measuring
3. PCM encoding (BT)
4. Modulation at access networks (ST)
5. Link code at TIMS system
6. SP telephone exchange configuration
7. Basic configuration of access router
8. Sampling and signal reconstruction (ST)
9. Measuring of E1 transmission equipment
10.PCM30U-CH equipment configuration

Language of instruction

Czech

Number of ECTS credits

5

Mode of study

Not applicable.

Learning outcomes of the course unit

Complex overview with all the related aspects of solving access and transport networks and their devices, especially with reference to prospective solutions of integrating networks and services. Network viewed as the largest cybernetic machine in the world and controlled from the terminal equipment. Processes of this control, as well as its organization, make it possible to get to the roots of control. Applying this knowledge, especially of control organization, also to other areas of economic and social life.

Prerequisites

The subject knowledge on the secondary school level is required.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Teaching methods depend on the type of course unit as specified in the article of BUT Rules for Studies and Examinations.

Assesment methods and criteria linked to learning outcomes

Requirements for completion of a course are specified by a regulation issued by the lecturer responsible for the course and updated for every.

Course curriculum

1. Introduction to the course. Evolution of telecommunication networks. Analogue and digital modulations. Modulations PCM, DM, ADM, DPCM, ADPCM. Terrestrial non-mobile networks, mobile networks, Wireless networks, Satellite networks. Terminals.

2. Access networks. Definition and function of access network. Architecture of access network. Level of access network. Optical access networks. local networks LAN, topology of LAN, LAN standards, technology Token Ring.

3. Transport networks. Definition and function of transport network, architecture of transport network, data transmission in transport network, security of data transport on transport network. wide networks WAN, networks Frame Relay.

4. Telephony exchanges. Operating system, operational load. Main operational hour, losses. Digital switching area, multiplexing, one-part and multi-part switching areas.

5. Digital switches S and T. Controlling and signalization in digital exchanges. System SS7. Systems EWSD and S12. Internet SIP exchange.

6. Transmission systems. Encoders and decoders PCM, A/D, D/A converters. Compandors and non-linear encoders, mí-low characteristic, A-low characteristic. Link codes. Recommendation ITU-T G.703, frame and multi-frame of 1st order system - E1. Transmission equipment PCM 30U and PCM 30U- OCH.

7. Analysis of total distortion at access and transport networks. Distortion allocation. Simplified calculation of Attenuation of quantizing distortion. Peak limiting for harmonic and noise signal. Analysis of sampling signal spectrum, spectrum for PAM 1st order and 2nd order.

8. Measuring at digital transmission systems. Analyser and generator of PCM signal, generator of pseudo-random sequence. Modern analysators. Check of digital signal step by step - BER measuring. Measuring of quantizing distortion, jitter measuring, residual attenuation measuring. ¨

9. Higher order digital systems. Plesiochronous Digital Hierarchy - PDH, Synchronous Digital Hierarchy - SDH, terminology at SDH. Quality of SDH, multiplexing scheme of SDH.

10. Technology CISCO for network elements. Basics of Ethernet networks. Setting of CISCO network elemnts.

11. Switching at LAN networks. Virtual networks VLAN. Protocols ISL and 802.1Q. STP (Spanning Tree Protocol) 802.1d. Routing at IP. Protocol RIP version 2, protocol EIGRP, protocol OSPF.

12. Quality of Service QoS. Classification and calibration. Control and network overload prevention. Shaping and regulation. Multicast transmission and routing IP. Multicast IP addresses, protocol IGMP.

13. Problem finalization. View of access ant transport technologies.

Work placements

Not applicable.

Aims

Giving a comprehensive overview of all most important parts of the telecommunication network,which is here comprehended as a tool for transmitting information to a required recipient in required quality. Access network solutions, means of traffic contentration, integration of services, multiple utilization of transmission media, effective utilization of these tools, shortening of idle times, optimal solution of transport network configuration.

Specification of controlled education, way of implementation and compensation for absences

The content and forms of instruction in the evaluated course are specified by a regulation issued by the lecturer responsible for the course and updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Not applicable.

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme EECC Bc. Bachelor's

    branch B-TLI , 3 year of study, winter semester, compulsory

  • Programme EEKR-CZV lifelong learning

    branch EE-FLE , 1 year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

Syllabus

1. Introduction to the course. Evolution of telecommunication networks. Analogue and digital modulations. Modulations PCM, DM, ADM, DPCM, ADPCM. Terrestrial non-mobile networks, mobile networks, Wireless networks, Satellite networks. Terminals.
2. Access networks. Definition and function of access network. Architecture of access network. Level of access network. Optical access networks. local networks LAN, topology of LAN, LAN standards, technology Token Ring.
3. Transport networks. Definition and function of transport network, architecture of transport network, data transmission in transport network, security of data transport on transport network. wide networks WAN, networks Frame Relay.
4. Telephony exchanges. Operating system, operational load. Main operational hour, losses. Digital switching area, multiplexing, one-part and multi-part switching areas.
5. Digital switches S and T. Controlling and signalization in digital exchanges. System SS7. Systems EWSD and S12. Internet SIP exchange.
6. Transmission systems. Encoders and decoders PCM, A/D, D/A converters. Compandors and non-linear encoders, mí-low characteristic, A-low characteristic. Link codes. Recommendation ITU-T G.703, frame and multi-frame of 1st order system - E1. Transmission equipment PCM 30U and PCM 30U- OCH.
7. Analysis of total distortion at access and transport networks. Distortion allocation. Simplified calculation of Attenuation of quantizing distortion. Peak limiting for harmonic and noise signal. Analysis of sampling signal spectrum, spectrum for PAM 1st order and 2nd order.
8. Measuring at digital transmission systems. Analyser and generator of PCM signal, generator of pseudo-random sequence. Modern analysators. Check of digital signal step by step - BER measuring. Measuring of quantizing distortion, jitter measuring, residual attenuation measuring. ¨
9. Higher order digital systems. Plesiochronous Digital Hierarchy - PDH, Synchronous Digital Hierarchy - SDH, termino

Laboratory exercise

26 hod., compulsory

Teacher / Lecturer

Syllabus

1. BER measuring CBT course
2. Active network elements measuring
3. PCM encoding (BT)
4. Modulation at access networks (ST)
5. Link code at TIMS system
6. SP telephone exchange configuration
7. Basic configuration of access router
8. Sampling and signal reconstruction (ST)
9. Measuring of E1 transmission equipment
10.PCM30U-CH equipment configuration