Course detail

Testing

FSI-XZKAcad. year: 2013/2014

Subject Testing introduce students with system and practical rules for working in test and calibration laboratories. Students should be able to apply the rules for measurements, testing, control and calibration. Acquired knowledge is also possible apllied for assurance of the check methods in manufacture. Systems of accreditation. Basis of test law. Quality assurance. Quality control. Procedures of testing and calibration of the measuring instruments. Validation of testing methods. Documentation of the testing results. Testing results expression. Uncertainty of measurement. Meter calibration uncertainty. Practical validation of the knowledge in testing laboratories.

Language of instruction

Czech

Number of ECTS credits

5

Mode of study

Not applicable.

Guarantor

doc. Ing. Róbert Jankových, CSc.

Department

Institute of Production Machines, Systems and Robotics (ÚVSSR)

Learning outcomes of the course unit

There is the subject Testing, which allow to obtain the knowledge in field of basic method of testing and calibration of measuring instruments, in field of confirmation of validity of test and calibration methods,how to express the results of measurement(test and calibration of measuring instruments) with the calculation of uncertainty, Students is led to aplly the basic methods of the measurement and the calibration, to express the results of the measurement including calculation or estimatin of the measurement.

Prerequisites

Quality management systems. Statistics, implemants for documentation of the testing results. Basic terms i metrology, technical standardization and statistic. The implements of statistical process control.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

The course is taught through lectures explaining the basic principles and theory of the discipline.

Assesment methods and criteria linked to learning outcomes

The condition:
The report with solution procedure:
- measurement management system (ISO 10012)
- uncertainty of measurement
- quality system audit of test/calibration laboratory (EN ISO/IEC 17025).

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

The objectives of the subject Testing is aquainted with the basic rules for management of the test and calibration laboratory as well as with outputs of the laboratories and their technical requirements. The objective of the subject is demonstrate that quality of production has to be measured. Testing and measurement is the integral part of the industrial process as the tool for verification quality.

Specification of controlled education, way of implementation and compensation for absences

The subject Testing is lectured, compensation of missing classes is not requested.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Guide to the Expression of Uncertainty in Measurements. Geneva: International Organization for Standardization, 1993. ISBN 92-67-10188-9 (EN)
Skákala, J. Všeobecná metrológia. Bratislava: Ediční středisko SVŠT v Bratislavě, 1990. ISBN 80-227-0275-7. (SK)

Recommended reading

CRISPIN, L. Agile Testing: A Practical Guide for Testers and Agile Teams. 1st. edition. Addison-Wesley Professional. Boston: Pearson Education, 2009, 576 p., ISBN-13: 978-0321534460. (EN)
ČSN EN ISO/IEC 17025 Požadavky na zkušební a kalibrační laboratoře. Praha: UNMZ, 2018. (CS)
ČSN ISO 5725-1:6. Přesnost (pravdivost a preciznost) metod a výsledků měření. Praha: UNMZ, 2018. (CS)

Classification of course in study plans

  • Programme N2301-2 Master's

    branch M-KSB , 2 year of study, winter semester, compulsory

  • Programme N3901-2 Master's

    branch M-MŘJ , 2 year of study, winter semester, compulsory-optional

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

Ing. Petr Koška, Ph.D.

Syllabus

1. Basic terms. Introduction to the test activities. Segmentation of the test branch. Validity of the test result. Personality of the test engineer.
2. Important requirements for the accreditation of the test laboratories. Quality control system for the test/calibration laboratories (EN ISO/IEC 17 025). Application of the requirements for accreditation to the quality control system for the test laboratory.
3. Requirements for test laboratory - requirements for management of the system (EN ISO/IEC 17025).
4. Requirements for test laboratory - technical requirements (EN ISO/IEC 17025).
5. Quality control system of the calibration laboratory. Procedure of calibration for the verification measuring instruments (mass, temperature, measuring instrument of lenght, capacity).
6. Metrology in test laboratory. Aspects of metrology in testing.
7. Confirmative system of metrology - measurement management systems (ISO 10012).
8. Aspects of the quality assurance (QA). Aspects of the operative management of quality in the test laboratories.
9. Statistics for the laboratory practice. Regulation diagrams.
10. Use of standards and internal procedures for testing. Validation of the test procedurs. Mutual approval of the test results.
11. Accuracy (trueness and precision) of the methods and results of the measurement.
12. Test results processing and test results locution. Uncertainty of the test results in the test laboratory. Statistical interpretation of the test results (confidence interval).
13. Uncertaines of the measurements. Applied aplications for used sort of the tests, tests of the physical parametres of mass, strenght, flexure, hardness).