Course detail

Special Technology of Machining

FSI-HO1-KAcad. year: 2015/2016

The course is focused on the machining technology used with numeric control machine tools. Students will obtain basic knowledge of programming NC-machines, they will familiarise with the use of linear programming in the technology, especially for determining optimum cutting parameters, with solution of dimensional chains in TPV applying methods of mathematical statistics, theory of operating allowances, and with conventional, as well as prospective cutting tools used with NC-machines. Practical exercises are carried out on CNC educational machine tools and PCs, used especially for a simulation of the machining at NC- machines and solving of linear programming tasks.




The subject is directed to the machining technology on CNC machine tools. The students are given the basic knowledge in the programming of NC machine tools such as linear programming in technology, especially for determination of optimum cutting parameters, solution of dimensional chains with the application of mathematical statistics methods. Practical exercises are realised on CNC machine tools and PC especially by simulation

Language of instruction

Czech

Number of ECTS credits

7

Mode of study

Not applicable.

Guarantor

doc. Ing. Josef Sedlák, Ph.D.

Department

Institute of Manufacturing Technology (ÚST)

Learning outcomes of the course unit

The students will obtain theoretical fundamentals of a machining technology with the use of numeric control machine tools, they will learn basic methods of programming of these tools, and will be acquainted with economic aspects of technological disciplines.

Prerequisites

The fundamentals of the metal cutting theory, probability theory, differential and integral calculus, determinants, dynamic of the mass point, mechanical work and energy, molecular physics and thermodynamics

Co-requisites

Not applicable.

Planned learning activities and teaching methods

The course is taught through lectures explaining the basic principles and theory of the discipline. Teaching is suplemented by practical laboratory work.

Assesment methods and criteria linked to learning outcomes

Credit requirements include an active participation in the exercises, completing all tasks in the laboratory exercises, and delivery of all required written work. In well-founded cases the teacher can set further conditions as a compensation. The examination tests the knowledge and, in particular, the ability to apply the knowledge independently in solving assigned tasks. The examination consists of a written and oral part. If the student fails to apply the knowledge in practice, the examination will be graded as unsatisfactory.

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

The aim of the course is to familiarise students with automation of a short-run and single-part production focusing on an application of numeric cntrol machine tools including technical production planning.

Specification of controlled education, way of implementation and compensation for absences

Students’ work is systematically controlled in a form of short written tests, individual compensatory assignments and result check.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

KOCMAN, K. a kolektiv. Aktuální příručka pro technický úsek. 15. ed. Edit. S. Hanzlík, Praha, Verlag Dashöfer, 2000 3950 s. ISBN 80-902247-2-5. (CS)
KOCMAN, K., PROKOP, J. Technologie obrábění. 2. vyd. Brno: Akademické nakladatelství CERM, s.r.o., 2005. 270 s. ISBN 80-214-3068-0. (CS)
KOCMAN, K. Speciální technologie obrábění. 3. ed. Brno: AKADEMICKÉ NAKLADATELSTVÍ CERM, s.r.o., 2004. 227 s. ISBN 80-214-2562-8. (CS)
PÍŠKA, M. a kolektiv. Speciální technologie obrábění. 1. vyd. Brno: AKADEMICKÉ NAKLADATELSTVÍ CERM, s.r.o., 2009. 246 s. ISBN 978-80-214-4025-8. (CS)

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme N2301-2 Master's

    branch M-STM , 2 year of study, winter semester, compulsory
    branch M-STG , 2 year of study, winter semester, compulsory-optional

Type of course unit

 

Guided consultation

13 hod., optionally

Teacher / Lecturer

Ing. Oskar Zemčík, Ph.D.
doc. Ing. Josef Sedlák, Ph.D.

Syllabus

1. High Accuracy Machining Technologies
2. Surface Integrity in Machining
3. Machining of Difficult-to-Machine Materials, Machining of Progressive Technical Materials
4. Fundamentals of Linear Programming (LP)
5. Applications of LP in Manufacturing Technology – Graphical Solution of LP Tasks
6. Applications of LP in Manufacturing Technology – Numerical Solution of LP Tasks
7. Cutting Conditions for CNC Drilling
8. Cutting Conditions for CNC Turning
9. Automation of a Small Lot Production Process
10. HSC, HFM and HPM Technologies
11. Production and Machining of Parts with Extreme Dimensions (micro, macro)
12. Deep Drilling
13. Additive Technologies, Reverse Engineering

Laboratory exercise

13 hod., compulsory

Teacher / Lecturer

Ing. Oskar Zemčík, Ph.D.
doc. Ing. Josef Sedlák, Ph.D.

Syllabus

1. Composition of technological procedure. 2.Composition of technological procedure. 3. Composition of technological procedure. 4. Optimalization choice of cutting conditions for turning operations. 5. Optimalization choice of cutting conditions for turning operations. 6. Optimalization choice of cutting conditions for drilling operations. 7. Optimalization choice of cutting conditions for drilling operations. 8.Operational program for CNC turning machine. 9. Operational program for CNC turning machine. 10. Operational program for CNC milling machine. 11. Operational program for CNC milling machine. 12. Tools condification. 13. Calculation of macine time, credit.