Course detail

Technical Diagnostic Fundamentals

FSI-CTDAcad. year: 2018/2019

The course is focused on the most advanced knowledge in technical diagnostics. Attention is devoted to clarification of incorporation of technical diagnostics into the product quality and to familiarization with the basic terms which are important for technical diagnostics. The diagnostic system, model and signal which belong among such terms are explained and discussed. Further, the basic diagnostic methods are described and discussed in detail. It is the diagnostics of deformation and pressure including the basic measurement and evaluation methods of the object temperature condition. Attention is devoted to the existing measuring instruments, measurement methods, and especially, to the monitored system status assessment and evaluation. The students are also familiarized with the standards and legislation valid in technical diagnostics. The possible qualification and its acquirement in technical diagnostics are also presented in detail. The course is completed with the exercises in which the selected topics are practiced using the examples from industrial practice. The results and conclusions are also discussed in the exercises. The Technical Diagnostics 1 and 2 courses in the master study continue this course.

Language of instruction

Czech

Number of ECTS credits

8

Mode of study

Not applicable.

Guarantor

doc. Ing. Miloš Hammer, CSc.

Department

Institute of Production Machines, Systems and Robotics (ÚVSSR)

Learning outcomes of the course unit

Pursuant to the course contents, students will acquire basic knowledge in the field of technical systems diagnostics, which will allow them to engage in solving various problems related to the area in question in industrial engineering and electrotechnic practice.

Prerequisites

Knowledge of mathematics and physics on the level of the bachelor studies completed so far is assumed.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

The course is taught through lectures explaining the basic principles and theory of the discipline. Exercises are focused on practical topics presented in lectures.
According to the possibility of teaching can be organized lectures for students by practitioners and excursions to companies focused on activities related to the course content.


Assesment methods and criteria linked to learning outcomes

The course consists of lectures and seminars. Exercises are required. The seminars are completed by a course-unit credit award. To achieve it, 100% presence and activity in seminars are required. The exam is realized in the form of a written test for which the student can obtain up to 100 points. The result of the exam is classified according to the ECTS classification scale.

Course curriculum

Not applicable.

Work placements

Not applicable.

Aims

The objective of the course is to obtain basic knowledge in the field of technical systems diagnostics.

Specification of controlled education, way of implementation and compensation for absences

The students’ participation and activity in seminars shall be checked. 100% participation in seminars is required; in case of absence, the student is obliged to substitute for the missed tuition in a way determined by the teacher.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

HAMMER,Miloš. Metody umělé inteligence v diagnostice elektrických strojů. 1. vydání. Praha: BEN – technická literatura, 2009. 400 s. ISBN 978-80-7300-231-2. (CS)
KREIDL,M; PETR,J; NOVÁK,J.; HOUFEK,P.; DOUBEK,P. Diagnostické systémy. 1. vydání. Praha: Vydavatelství ČVUT Praha, 2001. 352 s. ISBN 80-01-02349-4. (CS)
KREIDL,M; ŠMÍD,R. Technická diagnostika. Senzory-metody-analýza signálu. 1. vydání. Praha: BEN-technická literatura, 2006,408 s. ISBN 80-7300-158-6. (CS)
VOŠTOVÁ,V.; HELEBRANT,F.; JEŘÁBEK, K. Provoz a údržba strojů. 1. vydání. Praha: vydavatelství ČVUT Praha, 2002. 124 s. ISBN 80-01-02531-4. (CS)

Recommended reading

HELEBRANT,F; ZIEGLER,J. Technická diagnostika a spolehlivost, II. Vibrodiagnostika. 1. vydání-dotisk. VŠB – Technická univerzita Ostrava, 2005. 178 s. ISBN 80-248-0650-9. (CS)
MENTLÍK, V.; PIHERA,J.; POLANSKÝ,R.; PROSR,P.; TRNKA,P. Diagnostika elektrických zařízení. 1. vydání. Praha: BEN – technická literatura, 2008. 450 s. ISBN 987-80-7300-232-9. (CS)
MYKISKA,Antonín. Bezpečnost a spolehlivost technických systémů. 1. vydání. Praha: České vysoké učení technické v Praze, 2006,206 s. Učební texty ČVUT v Praze. Fakulta strojní. ISBN 80-01-02868-2. (CS)
CZICHOS, H. Handbook of Technical Diagnostics. 2012. 650 p. SBN 978-3-642-25849-7. (EN)
DUFFUAA, S. O., RAOUF, A. Planning and Control of Maintenance Systems. Modelling a Analysis. 2. vydání. Springer International Publishing AG, Switzerland, 2016. 348 s. ISBN 9783319371818. (EN)
HAVRILLA, K. Technical Diagnostics: Collected Papers. Nova Science Pub Inc, 1988. 297 p. ISBN-13: 978-0941743419. (EN)
MOHANTY A.R. Machinery Condition Monitoring: Principles and Practices. CRC Press, Boca Raton, Florida, USA, 2014. 282 s. ISBN 9781466593053. (EN)

Classification of course in study plans

  • Programme B3S-P Bachelor's

    branch B-KSB , 2 year of study, summer semester, compulsory

Type of course unit

 

Lecture

39 hod., optionally

Teacher / Lecturer

doc. Ing. Miloš Hammer, CSc.

Syllabus

1.Incorporation of technical diagnostics into quality product
2.Most important terms in technical diagnostics
3.Diagnostic system and its description
4.Diagnostic model, description and discussion
5.Diagnostic signal and its basic properties
6.Selected methods in technical diagnostics, their division, and characteristics
7.Principles of diagnostic deformation
8.Resistance and optical tensometers
9.Principles of pressure diagnostics
10.Hydrostatic, deformation and piston pressure gauges
11.Introduction to thermodiagnostics
12.Methods of measurements and evaluation of temperature conditions
13.Standards, legislation and qualification in technical diagnostics

Exercise

9 hod., compulsory

Teacher / Lecturer

Ing. Petr Kratochvíl, Ph.D.

Syllabus

The following four exercises are held once in two weeks, the exercise takes two lessons.
1.Incorporation of technical diagnostics into quality product, most important terms in technical diagnostics
2.Diagnostic system and its description , diagnostic model, description and discussion
3.Principles of diagnostic deformation, resistance and optical tensometers
4.Hydrostatic, deformation and piston pressure gauses
The following exercise takes one lesson.
5.Course-unit credit

Computer-assisted exercise

4 hod., compulsory

Teacher / Lecturer

Ing. Petr Kratochvíl, Ph.D.

Syllabus

The following two exercises are held once in two weeks, the exercise takes two lessons.
6.Diagnostic signals, their analyses and processing
7.Methods of measurements and evaluation of temperature conditions