Course detail

Distribution and Industrial Networks

FEKT-MKC-MEZAcad. year: 2021/2022

The course deals with operation of distribution and industrial networks, both viewpoints of requirements for power quality and of the reliability of supply. The ways of operating and fault conditions of these networks and their protection are explained, as well as problems of distributed generation sources connection. Part of the course is devoted to the currently used standards for evaluating the reliability of power supply.

Language of instruction

Czech

Number of ECTS credits

5

Mode of study

Not applicable.

Guarantor

doc. Ing. David Topolánek, Ph.D.

Department

Department of Electrical Power Engineering (UEEN)

Learning outcomes of the course unit

Graduates of this course should be able to
- describe the operation and method of dimensioning of compensated networks,
- explain the differences in protection and ground fault localization methods in isolated and compensated networks,
- list the basic voltage characteristics,
- explain the voltage control process in a characteristic point of the distribution network,
- assess the influence of local sources on the quality of voltage at the point of connection
- define basic types overvoltages in the distribution network
- apply the wavelet theory on the calculation of surge arrester protection distance,
- describe the method of evaluation and indicators of reliability of power supply.

Prerequisites

Students should know the principles of unsymmetrical faults in power system, be able to describe the principles of overcurrent and distance protections. General knowledge is required at the level of bachelor's degree, but it is advisable to have completed course Distribution Equipments.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Techning methods include lectures, computer laboratories and practical laboratories. Course is taking advantage of e-learning (Moodle) system. Students have to write a single project/assignment during the course.

Assesment methods and criteria linked to learning outcomes

Students can gain up to 40 points from the total evaluation of the course for the project and tests during the semester and final oral exam max 60b. The first part is formed from a separate project max. 15b., two tests from distribution system operation max. 15b. and reliability of distribution networks 10b. The minimum number of points to be awarded is 20b, with a minimum of 12,5b from the tests. Written part examines students' ability to apply theoretical knowledge to determine network conditions during failure states and to orientate in the area of DS reliability. The oral part is focused on their orientation in thematic circuits defined by the syllabus.

Course curriculum

1. Different network concepts in neutral point treatment terms, its features and application.
2. Compensated network operation - construction and setting of Petersen coil.
3. Earth fault localization method, earth fault protections.
4. Voltage characteristics, cause of voltage drops and interruptions.
5. Voltage control in distribution network.
6. Distribution networks with distributed generation and their negative effects on energy quality.
7. Protection against overvoltage – types, application, parameters, protection distance of surge arrester.
8. Protection and automatic devices for distribution lines – overcurrent and distance protection, reclosing automatics.
9. Reliability indicators as a random quantity.
10. Continuity as a supply quality component. Evaluation of supply reliability.

Work placements

Not applicable.

Aims

The course should familiarize students with the design and operation of distribution and industrial networks. The aim is to introduce the fundamentals of network faults and how they are protected. The last part of the course is focused on the current standards used for evaluating the reliability of power supply.

Specification of controlled education, way of implementation and compensation for absences

Labs are compulsory; correctly excused absence can be replaced by arrangement with the teacher.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Haluzík, E.; Weidinger, L.; Krátký, M.; Ochrany a jištění energetických zařízení, skriptum VUT, Brno (CS)
Skala, P.; SPOLEHLIVOST DISTRIBUCE ELEKTRICKÉ ENERGIE ZÁKAZNÍKŮM, skriptum VUT, Brno, 2011 (CS)
TOMAN, P.; DRÁPELA, J.; MIŠÁK, S.; ORSÁGOVÁ, J.; PAAR, M.; TOPOLÁNEK, D.; BOK, J.; NOVOTNÝ, J.; ŠKODA, J. Provoz distribučních soustav. 1. 1. Praha: České vysoké učení technické v Praze, 2011. 264 s. ISBN: 978-80-01-04935- 8. (CS)

Recommended reading

Not applicable.

Elearning

eLearning: currently opened course

Classification of course in study plans

  • Programme MKC-EEN Master's 2 year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

doc. Ing. David Topolánek, Ph.D.

Syllabus

1. Different network concepts in neutral point treatment terms, its features and application.
2. Compensated network operation - construction and setting of Petersen coil.
3. Voltage proportion of distribution networks - voltage control in characteristic node.
4. Asymmetry of voltage in distribution network, electric traction supply.
5. Connection of distributed generation sources.
6. Negative effects of industrial installations and distributed generation.
7. Protection against overvoltage.
8. Protection and automatic devices for distribution lines.
9. Remote control, measuring and information transport.
10. Electrical network reliability.
11. Reliability indicators as a random quantity.
12. Continuity as a supply quality component. Evaluation of supply reliability.
13. Estimation methods of electrical network reliability, their application in optimization problems.

Fundamentals seminar

6 hod., optionally

Teacher / Lecturer

doc. Ing. David Topolánek, Ph.D.

Syllabus

1. Design of compensation coil for the given network.
2. Calculation of earth fault current in insulated and compensated network.
3. Design of power factor compensation system and its implementation into the industrial network.

Exercise in computer lab

16 hod., compulsory

Teacher / Lecturer

doc. Ing. David Topolánek, Ph.D.

Syllabus

1. Fundamentals of work in PSCAD program
2. Modeling of distribution network elements in PSCAD program
3. Modeling of distribution network elements in PSCAD program
4. Modeling of faults in distribution network elements in PSCAD program
5. Individual project in PSCAD program
6. Individual project in PSCAD program
7. Simulation of reliability of MV simple feeder by means of unsequentional method MONTE CARLO
8. Simulation of reliability of MV simple feeder by means of unsequentional method MONTE CARLO

Laboratory exercise

4 hod., compulsory

Teacher / Lecturer

doc. Ing. David Topolánek, Ph.D.

Syllabus

1. Measuring on MV line model - fault locators
2. Measuring on MV network model - influence of Petersen coil tunning on earth fault residual current

Elearning

eLearning: currently opened course