Course detail

Analog Electronics 2

FEKT-BPC-AE2Acad. year: 2021/2022

This course improves and extends gained knowledge from Analog electronics 1 in the area of practical analog circuit design and brings an amount of new areas that are essential for designers of analog electronic circuits. The circuits for signal shaping, basic transistor building blocks (current mirrors, differential pairs), design of single stage transistor amplifiers (including bias point), switching applications, guidelines of practical work with operational amplifiers and their specific nonstandard applications, comparative operations, flip-flop circuits and multivibrators, circuits for signal generation, etc. belong to the fundamental skills of bachelor students focused on weak current electronics. The solved examples at lectures are supported by computer (OrCAD PSpice, Snap, Matlab) and laboratory exercises.

Language of instruction

Czech

Number of ECTS credits

6

Mode of study

Not applicable.

Guarantor

doc. Ing. Roman Šotner, Ph.D.

Department

Department of Radio Electronics (UREL)

Learning outcomes of the course unit

The graduate (1) understands problems of selected practically oriented areas (emphasis of design) of analog electronics. The area of gained skills belongs to knowledge of fundamental principle of shaping and switching applications, simple transistor stages and comparators, non-sinusoidal signal generation, etc. The graduate (2) is able to evaluate suitability of active elements for expected application, (3) to select optimal approach, topology, concept, (4) to design/calculate values of circuit elements for specific required operational parameters and (5) to verify operation of circuit by computer simulation and experimentally in laboratory.

Prerequisites

Students registering for the course should be able to explain the basic principles of electrotechnics, electronic elements, high-school mathematics, basis of experimental work and basis of computer simulation.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Teaching methods include lectures, computer exercises and practical laboratories. All materials are available in e-learning.

Assesment methods and criteria linked to learning outcomes

During the semester, student can obtain up to 16 points for his activity in laboratory, up to 16 points for his activity at computer exercises, up to 8 points for test and up to 60 points for final exam.

Course curriculum

1. Design of simple amplification stages with unipolar transistor (parameters and bias point)

2. Design of tunable oscillators I (characteristic equation, oscillation condition and frequency, relation of generated waveforms)

3. Design of tunable oscillators II (oscillation frequency adjustment and dependence type, electronic adjustment, multiphase output, amplitude stabilization, inaccuracies, tunability range enhancement)

4. Diode shapers, limiters and their applications

5. Propagation of signal by linear and nonlinear system (two-ports, time constants, transient responses, parameters of square-wave signal)

6. Bipolar junction transistor and unipolar transistor based power switches

7. Analog comparators (suitable active elements, typical topologies and design)

8. Discrete and integrated flip-flop circuits (transistor-based bistable, monostable and astable version, NE555, TTL devices)

9. Design of tunable non-sinusoidal waveform generators I (basic generators using opamps)

10. Design of tunable non-sinusoidal waveform generators II (special solutions, electronic tuning, PWM)

11. Guidelines for practical work with operational amplifiers (parasitic behavior, parasitic features and protection), selected applications

12. Practical features of basic bipolar junction transistors and unipolar transistors based building blocks (differential pair, linearization, operational amplifier)

13. Modern active elements for design of analog circuits and examples of applications, electronic adjustment of parameters

 

Work placements

Not applicable.

Aims

Lectures aim on specific areas of analog circuits and systems focused on impulse, switching, comparative and other linear and nonlinear applications of transistors, operational amplifiers and modern active elements. In addition, these activities target especially on practical utilization of gained knowledge.

Specification of controlled education, way of implementation and compensation for absences

The content and forms of instruction in the evaluated course are specified by a regulation issued by the lecturer responsible for the course annually.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

BIOLEK, D.; HÁJEK, K.; KRTIČKA, A.; ZAPLATÍLEK, K.; DOŇAR, B. Elektronické obvody I. Brno: Univerzita obrany, 2006. (CS)
VOBECKÝ, J.; ZÁHLAVA, V. Elektronika - součástky a obvody, principy a příklady. Praha: Grada, 2005. (CS)

Recommended reading

PUNČOCHÁŘ, J. Operační zesilovače v elektronice. Praha: BEN – technická literatura, 2002. (CS)

Elearning

eLearning: currently opened course

Classification of course in study plans

  • Programme BPC-ECT Bachelor's 2 year of study, summer semester, compulsory

  • Programme IT-BC-3 Bachelor's

    branch BIT , 2 year of study, summer semester, elective

  • Programme BIT Bachelor's 2 year of study, summer semester, elective

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

doc. Ing. Roman Šotner, Ph.D.

Syllabus

  • Design of simple amplification stages with unipolar transistor
  • Design of tunable oscillators
  • Diode shapers and limiters
  • Propagation of signal by linear and nonlinear system, transient responses
  • Bipolar junction transistor and unipolar transistor based power switches
  • Analog comparators
  • Discrete and integrated flip-flop circuits
  • Design of tunable non-sinusoidal waveform generators
  • Guidelines for practical work with operational amplifiers, selected applications
  • Practical features of basic bipolar junction transistors and unipolar transistors based building blocks, differential pair, nonlinear analysis, linearization
  • Modern active elements, electronic adjustment of parameters

 

Fundamentals seminar

6 hod., compulsory

Teacher / Lecturer

doc. Ing. Roman Šotner, Ph.D.

Syllabus

  • Design of single stage amplifier using unipolar transistor
  • Design of sine wave oscillators
  • Design of diode limiter and shaper
  • Time domain and frequency domain transfer of simple RC two-ports
  • Design of transistor switches
  • Design of comparators
  • Design of discrete flip-flops
  • Design of waveform generators

 

Exercise in computer lab

13 hod., compulsory

Teacher / Lecturer

doc. Ing. Roman Šotner, Ph.D.

Syllabus

  • Unipolar transistor-based single-stage amplifiers
  • Harmonic oscillator using RC band-pass filter
  • Limiters and signal shapers
  • Propagation of signal by linear and nonlinear system
  • Bipolar junction transistor and unipolar transistor based power switches
  • Analog comparators
  • Discrete and integrated flip-flop circuits
  • Waveform generators

 

Laboratory exercise

13 hod., compulsory

Teacher / Lecturer

doc. Ing. Roman Šotner, Ph.D.
Ing. Lukáš Langhammer, Ph.D.

Syllabus

  • Unipolar transistor-based single-stage amplifiers (ZES)
  • Voltage controlled quadrature oscillator (VCO)
  • Diode limiter and shaper (OT)
  • Transistor-based switches (TS)
  • Comparators (KOM)
  • Discrete flip-flop circuits (KO)
  • Waveform generators (GEN)
  • Applications of 555 timer (555)

 

Elearning

eLearning: currently opened course