Course detail

Technology of Constructions 2

FAST-BWA003Acad. year: 2021/2022

The subject follows on from Technology of Constructions 1 and covers the area of building processes, linked with the erection of constructions, interior and finishing work. Principles of the manufacturing, transportation and storage of prefabricated components. Preparedness of the construction site for assembly. Procedures used in the assembly of reinforced concrete and steel structures. Issues connected with interior and finishing processes, principles governing their performance, sequence of activities, preparedness for construction at the place of work, mutual relationships and their coordination. Quality and safety requirements, and requirements with regard to the environment.

Language of instruction

Czech

Number of ECTS credits

4

Mode of study

Not applicable.

Guarantor

doc. Ing. Vít Motyčka, CSc.

Department

Institute of Technology, Mechanisation and Construction Management (TST)

Learning outcomes of the course unit

By mastering the objectives of the Technology of Constructions course II the students acquire principal knowledge of partial technology stages of the building operations process, in particular of some carcass superstructure processes and interior and finishing processes.

Prerequisites

Knowledge of building design principles.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Not applicable.

Assesment methods and criteria linked to learning outcomes

Not applicable.

Course curriculum

1. Assembly processes. Assembly of buildings from prefabricated reinforced concrete components. Principles of the production, transportation and storage of prefabricated components. Assembly procedures.
2. Assembly of steel structures. Production of structural elements, principles of haulage and storage. Optimisation of assembly methods and procedures.
3. Introduction to issues concerned with interior and finishing processes. Sequence of individual processes, their relationships and coordination.
4. Principles of constructing dividing walls using masonry or glass blocks, or assembled segments/ skeletons.
5. Installation processes. Construction of interior sewage systems. Water and central heating distribution systems. Installation of inner gas duct and air handling distribution systems.
6. Insulation of buildings against water, heat, noise, vibration and chemicals. Flow-charts, readiness for construction, relationships, quality control, tests.
7. Assembly of items for the filling of openings – windows, door panels, locksmith’s products, built-in furniture, etc. Readiness for construction, working procedures, types of anchoring.
8. Surface treatments for building structures – interior and external plasterwork, types, flow-charts.
9. External thermal insulation cladding technology, systems, flow-charts. Quality conditions.
10. Execution of interior and external linings, systems, technical procedures, requirements for construction readiness.
11. Construction of ceiling soffits. Systems, readiness of the base, technical procedures. Time requirements.
12. Laying of floors and paving. Types, material variants. Working procedures, requirements for technical breaks.
13. Paints and coatings for walls, timber and steel structures. Types of paint and coating materials, their classification and applicability.

Work placements

Not applicable.

Aims

The course objective is to teach the students to make a technological regulation of the selected partial construction processes of rough construction and finishing works and to be able to use these elaborated documents in practice for the construction execution.

Specification of controlled education, way of implementation and compensation for absences

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

Not applicable.

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme BKC-SI Bachelor's 4 year of study, winter semester, compulsory
  • Programme BPA-SI Bachelor's 4 year of study, winter semester, compulsory

  • Programme BPC-SI Bachelor's

    specialization S , 4 year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

doc. Ing. Vít Motyčka, CSc.

Syllabus

1. Assembly processes. Assembly of buildings from prefabricated reinforced concrete components. Principles of the production, transportation and storage of prefabricated components. Assembly procedures. 2. Assembly of steel structures. Production of structural elements, principles of haulage and storage. Optimisation of assembly methods and procedures. 3. Introduction to issues concerned with interior and finishing processes. Sequence of individual processes, their relationships and coordination. 4. Principles of constructing dividing walls using masonry or glass blocks, or assembled segments/ skeletons. 5. Installation processes. Construction of interior sewage systems. Water and central heating distribution systems. Installation of inner gas duct and air handling distribution systems. 6. Insulation of buildings against water, heat, noise, vibration and chemicals. Flow-charts, readiness for construction, relationships, quality control, tests. 7. Assembly of items for the filling of openings – windows, door panels, locksmith’s products, built-in furniture, etc. Readiness for construction, working procedures, types of anchoring. 8. Surface treatments for building structures – interior and external plasterwork, types, flow-charts. 9. External thermal insulation cladding technology, systems, flow-charts. Quality conditions. 10. Execution of interior and external linings, systems, technical procedures, requirements for construction readiness. 11. Construction of ceiling soffits. Systems, readiness of the base, technical procedures. Time requirements. 12. Laying of floors and paving. Types, material variants. Working procedures, requirements for technical breaks. 13. Paints and coatings for walls, timber and steel structures. Types of paint and coating materials, their classification and applicability.

Exercise

26 hod., compulsory

Teacher / Lecturer

doc. Ing. Vít Motyčka, CSc.

Syllabus

1.–3. Assembly of precast reinforced concrete frame system, designing the composition of such a system and listing its elements, assembly procedure, selection of an assembly crane, work aids, composition of work crews, temporal progression of work. 4.–6. Interior distribution systems, technical documentation (water, sewage systems, electricity). Preparedness for construction, material selection, execution procedure. 7.–9. Application of interior plastering, preparedness for construction, utilised materials, work crew composition, mechanical equipment and work tools. Execution procedure, time schedule for carrying out interior plastering on the structure in question. 10.–12. Floor laying, selection of floor surfaces, preparedness for construction, listing materials, work tools and aids, working procedures. 13. Assessment of completed tasks, defence of proposed solutions, credit.