Course detail

Technology of Constructions

FAST-BWB014Acad. year: 2022/2023

Technology of constructions is dealing with research, development, modelling and implementation of production processes in civil engineering. The objective is an optimum and economic manner of the execution of building structures, buildings and their complexes.
The course covers introduction into the branch of the technology of constructions, division of construction processes, their technology, spatial and time structure and optimisation of their course. In addition the students are acquainted with preparation and realisation phase of the investment process, from the letter of intent up to the passing over of a completed building into operation.

Language of instruction

Czech

Number of ECTS credits

3

Mode of study

Not applicable.

Guarantor

doc. Ing. Radka Kantová, Ph.D.

Department

Institute of Technology, Mechanisation and Construction Management (TST)

Learning outcomes of the course unit

By mastering the objectives of the Technology of Constructions course the students acquire principal knowledge of partial technology stages of the building operations process.The course will teach them to understand the pre-production, erection and user processes from the point of view of all common parties in the construction procedure.

Prerequisites

Basic knowledge of planning and designing of construction of civil engineering and utility services.

Co-requisites

Not applicable.

Planned learning activities and teaching methods

Not applicable.

Assesment methods and criteria linked to learning outcomes

Not applicable.

Course curriculum

1. Introduction into the technology of constructions, basic terms, construction processes and their division, possibilities of analysis of the technology of constructions and their modelling, technical documentation
2. Process of earth moving operations and foundation engineering, technology procedures.
3. Processes of concrete and reinforced concrete structures (formwork, reinforcement, concrete laying)
4. Walling procedures of bearing, filling and partition structures (materials, technology principles)
5. Assembly processes of bearing structures of the carcass construction (reinforced concrete semi-products, steel and timber)
6. Processes related with peripheral claddings of buildings (roof and wall claddings)
7. Indoor and finishing processes in the construction (distributions of all installations, wall and floor surface treatment, joiner´s)
8. Complete investment procedure, division, preparatory and realisation phase
9. Pre-production preparation of construction technology needed for construction work, principles of construction work
10. Preparation of manufacturing and operational construction technology for construction work
11. Construction machines, conception of a proposal for mechanisation, methods of assessing usability, technical data sheets for machines
12. Realisation of construction work, modelling of the manufacturing areas of structures, documentation for building site equipment
13. Quality and safety of construction work, its assurance and inspection, protection of the environment during construction

Work placements

Not applicable.

Aims

Acquiring of knowledge of selected construction processes, of requirements for their readiness before execution, balance of sources, principles of technology procedures of individual construction processes, their sequence and links, requirements for their quality, safety and environmental protection in the course their realisation.
Basic information on requirements for the construction preparation and realisation.

Specification of controlled education, way of implementation and compensation for absences

Extent and forms are specified by guarantor’s regulation updated for every academic year.

Recommended optional programme components

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

COOKE, Brian. Construction Planning, Programming and Control. Chicester: BLACKWELL PUBLISHERS, 2009. ISBN: 1405183802. (EN)
HARRIS, Frank a McCAFFER, Ronald. Modern Construction Management, 7th Edition. Oxford:Wiley-Blackwell, 2013. (EN)
Zákon o územním plánování a stavebním řádu 183/2006 Sb. v aktualizovaném znění. (CS)
JARSKÝ, Čeněk, MUSIL, František, a kol.. Technologie staveb II, Příprava a ralizace staveb. CERM Brno, 2003. ISBN 80-7204-282-3. (CS)
Kantová Radka. Průvodce k předmětu AW51. 114 stran, 2010 (CS)
LÍZAL, Petr, a kol.. Technologie stavebních procesů pozemních staveb, Úvod do technologie ,Hrubá spodní stavba,. CERM,s.r.o., Brno, 2003. ISBN 80-214-2536-9. (CS)
MAKÝŠ,Oto, MAKÝŠ,Peter. Technologický projekt: Projekt organizácie výstavby. Bratislava : ES STU, 2005. (SK)
MOTYČKA, Vít, a kol. . Technologie staveb I, Technologie stavebních procesů, část 2,Hrubá vrchní stavba.. CERM,s.r.o., Brno, 2004. ISBN 80-214-2873-2. (CS)

Recommended reading

Not applicable.

Classification of course in study plans

  • Programme BPC-APS Bachelor's 4 year of study, winter semester, compulsory-optional

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

doc. Ing. Radka Kantová, Ph.D.

Syllabus

1. Introduction into the technology of constructions, basic terms, construction processes and their division, possibilities of analysis of the technology of constructions and their modelling, technical documentation 2. Process of earth moving operations and foundation engineering, technology procedures. 3. Processes of concrete and reinforced concrete structures (formwork, reinforcement, concrete laying) 4. Walling procedures of bearing, filling and partition structures (materials, technology principles) 5. Assembly processes of bearing structures of the carcass construction (reinforced concrete semi-products, steel and timber) 6. Processes related with peripheral claddings of buildings (roof and wall claddings) 7. Indoor and finishing processes in the construction (distributions of all installations, wall and floor surface treatment, joiner´s) 8. Complete investment procedure, division, preparatory and realisation phase 9. Pre-production preparation of construction technology needed for construction work, principles of construction work 10. Preparation of manufacturing and operational construction technology for construction work 11. Construction machines, conception of a proposal for mechanisation, methods of assessing usability, technical data sheets for machines 12. Realisation of construction work, modelling of the manufacturing areas of structures, documentation for building site equipment 13. Quality and safety of construction work, its assurance and inspection, protection of the environment during construction

Exercise

13 hod., compulsory

Teacher / Lecturer

doc. Ing. Radka Kantová, Ph.D.

Syllabus

1. Materials for the semestral work, instructions for their elaboration, processes and possibilities of the earthworks mechanization 2. Earthworks, foundations, procedure choice and machinery design, verification of possible mechanization use 3. Concreting processes, choice of technological methods, principles of framework design, details 4. Bricking processes, material choice, technological method, details 5. Enclosing shell, fabrication processes, vertical transport design 6. Field trip on a selected building construction within the region 7. Checking the assigned parts outcomes, principles of process continuation of the interior and final works 8. Construction technology building preparation, principles of building organization 9. Construction site equipment documentation, choice of the objects of construction site equipment, plan of a construction site organization 10. Execution time plan, building material supply for the construction 11. Control and trial plan, safety and health protection during the work, risks plan 12. Environmental protection 13. Final consultation,credit