Course detail
Project, Design and Logistics of Transport and Handling Equipment
FSI-QLDAcad. year: 2023/2024
The course in Project and Design of Transport and Handling Equipments familiarises students with project activities in the sphere of material handling and with new possibilities of computer support used for its rationalization. Material flow, its analysis and evaluation methods are discussed. Mathematical expression of handling-transport problem. Methods of minimizing transport costs. Project documentation of material handling systems. Method of Systematic Handling Analyses. Efficiency indexes of handling systems. Design of storage services. Logistics of handling chain. Simulation of handling processes. Transport logistics and handling acquaints students with the logistics and costs of services and their impact on the efficient function of transport - handling systems. Using computer aided simulation of the transport-handling processes.
Language of instruction
Czech
Number of ECTS credits
3
Mode of study
Not applicable.
Guarantor
Entry knowledge
Successful completion of the course is conditional on the basic knowledge of technical mechanics, physics and higher mathematics.
Rules for evaluation and completion of the course
Course-unit credit is awarded on condition of having attended the seminars, and worked out the assigned tasks. Examination tests student's knowledge, as well as his/her ability to apply in practice. The examination has a written an oral part.
Attendance at lectures is voluntary.
Attendance at seminars is obligatory and checked by the teacher. Absence may be in justified cases compensated for by the agreement with the course supervisor.
Attendance at lectures is voluntary.
Attendance at seminars is obligatory and checked by the teacher. Absence may be in justified cases compensated for by the agreement with the course supervisor.
Aims
The aim of the course is to make students familiar with methods of project activities in the sphere of material handling. The meaning of material flow and its evaluation are also discussed. The course presents the principle of the S.H.A. method, including evaluation of efficiency of handling systems. Also dealt with is the simulation of handling processes. Another aim is to acquaint students with the concept, purpose and meaning of logistics and transportation planning. Logistics as a tool for optimization, cost reduction and marketing in transport. Logistical factors. Logistics in the transport strategy. Understanding the basics of simulation software "Plant Simulation" and associated programming languages. The possibility of its use for solving transport-handling processes.
The course in Project and Design of Transport and Handling Equipments makes students familiar with the design of handling equipments and material handling planning. Student will be able to optimise the material flow in definite production, evaluate handling work, and to minimize handling-transport costs. The student is able to identify appropriate indicators and logistics to calculate logistics costs and performance. Students will acquire basic knowledge for modeling simple handling and transport processes using the numerical software.
The course in Project and Design of Transport and Handling Equipments makes students familiar with the design of handling equipments and material handling planning. Student will be able to optimise the material flow in definite production, evaluate handling work, and to minimize handling-transport costs. The student is able to identify appropriate indicators and logistics to calculate logistics costs and performance. Students will acquire basic knowledge for modeling simple handling and transport processes using the numerical software.
Study aids
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
BIGOŠ, Peter, Jozef KUĽKA, Melichar KOPAS a Martin MANTIČ. Teória a stavba zdvíhacích a dopravných zariadení. Košice: TU v Košiciach, Strojnícka fakulta, 2012. Edícia vedeckej a odbornej literatúry (Technická univerzita v Košiciach). ISBN 9788055311876. (SK)
GHIANI, Gianpaolo., Gilbert LAPORTE a Roberto. MUSMANNO. Introduction to logistics systems planning and control. Hoboken, NJ, USA: J. Wiley, c2004. ISBN 0470849177. (EN)
PERNICA, Petr. Logistika pro 21. století: (Supply chain management). Praha: Radix, 2005. ISBN 8086031594. (CS)
PRECLÍK, Vratislav. Průmyslová logistika. Praha: Nakladatelství ČVUT, 2006. ISBN 80-01-03-449-6. (CS)
PTÁČEK, Petr a Aleš KAPLÁNEK. Přeprava nákladu v silniční nákladní dopravě. Brno: CERM, 2002. ISBN 8072042572. (CS)
RAJA G. KASILINGAM. Logistics and transportation: design and planning. 2. ed. Dordrecht [u.a.]: Kluwer, 2000. ISBN 0412802902. (EN)
RAJA G. KASILINGAM. Logistics and transportation: design and planning. 2. ed. Dordrecht [u.a.]: Kluwer, 2000. ISBN 0412802902. (EN)
TONCHIA, Stefano. Industrial project management: planning, design, and construction. Berlin: Springer, c2008. ISBN 978-3-540-77542-3. (EN)
GHIANI, Gianpaolo., Gilbert LAPORTE a Roberto. MUSMANNO. Introduction to logistics systems planning and control. Hoboken, NJ, USA: J. Wiley, c2004. ISBN 0470849177. (EN)
PERNICA, Petr. Logistika pro 21. století: (Supply chain management). Praha: Radix, 2005. ISBN 8086031594. (CS)
PRECLÍK, Vratislav. Průmyslová logistika. Praha: Nakladatelství ČVUT, 2006. ISBN 80-01-03-449-6. (CS)
PTÁČEK, Petr a Aleš KAPLÁNEK. Přeprava nákladu v silniční nákladní dopravě. Brno: CERM, 2002. ISBN 8072042572. (CS)
RAJA G. KASILINGAM. Logistics and transportation: design and planning. 2. ed. Dordrecht [u.a.]: Kluwer, 2000. ISBN 0412802902. (EN)
RAJA G. KASILINGAM. Logistics and transportation: design and planning. 2. ed. Dordrecht [u.a.]: Kluwer, 2000. ISBN 0412802902. (EN)
TONCHIA, Stefano. Industrial project management: planning, design, and construction. Berlin: Springer, c2008. ISBN 978-3-540-77542-3. (EN)
Recommended reading
BIGOŠ, Peter, Jozef KUĽKA, Melichar KOPAS a Martin MANTIČ. Teória a stavba zdvíhacích a dopravných zariadení. Košice: TU v Košiciach, Strojnícka fakulta, 2012. Edícia vedeckej a odbornej literatúry (Technická univerzita v Košiciach). ISBN 9788055311876. (SK)
GHIANI, Gianpaolo., Gilbert LAPORTE a Roberto. MUSMANNO. Introduction to logistics systems planning and control. Hoboken, NJ, USA: J. Wiley, c2004. ISBN 0470849177. (EN)
PERNICA, Petr. Logistika pro 21. století: (Supply chain management). Praha: Radix, 2005. ISBN 8086031594. (CS)
PRECLÍK, Vratislav. Průmyslová logistika. Praha: Nakladatelství ČVUT, 2006. ISBN 80-01-03-449-6. (CS)
PTÁČEK, Petr a Aleš KAPLÁNEK. Přeprava nákladu v silniční nákladní dopravě. Brno: CERM, 2002. ISBN 8072042572. (CS)
RAJA G. KASILINGAM. Logistics and transportation: design and planning. 2. ed. Dordrecht [u.a.]: Kluwer, 2000. ISBN 0412802902. (EN)
TONCHIA, Stefano. Industrial project management: planning, design, and construction. Berlin: Springer, c2008. ISBN 978-3-540-77542-3. (EN)
GHIANI, Gianpaolo., Gilbert LAPORTE a Roberto. MUSMANNO. Introduction to logistics systems planning and control. Hoboken, NJ, USA: J. Wiley, c2004. ISBN 0470849177. (EN)
PERNICA, Petr. Logistika pro 21. století: (Supply chain management). Praha: Radix, 2005. ISBN 8086031594. (CS)
PRECLÍK, Vratislav. Průmyslová logistika. Praha: Nakladatelství ČVUT, 2006. ISBN 80-01-03-449-6. (CS)
PTÁČEK, Petr a Aleš KAPLÁNEK. Přeprava nákladu v silniční nákladní dopravě. Brno: CERM, 2002. ISBN 8072042572. (CS)
RAJA G. KASILINGAM. Logistics and transportation: design and planning. 2. ed. Dordrecht [u.a.]: Kluwer, 2000. ISBN 0412802902. (EN)
TONCHIA, Stefano. Industrial project management: planning, design, and construction. Berlin: Springer, c2008. ISBN 978-3-540-77542-3. (EN)
Elearning
eLearning: currently opened course
Classification of course in study plans
- Programme N-ADI-P Master's 2 year of study, winter semester, compulsory-optional
Type of course unit
Lecture
39 hod., compulsory
Teacher / Lecturer
Syllabus
1.Handling process and handling equipments, quantitative factors of handling process.
2.Handling equipment - conveyors.
3.Handling equipment - cranes, industrial trucks.
4.Positioning equipments, storage unit and forming equipment.
5.Storage equipment, identification and control equipment.
6.Material flow and its analysis, methods of analysis of the material handling.
7.Mathematical expression of the handling-transport problem.
8.Project documentation of material handling systems.
9.Method Systematic Handling Analyses.
10.Logistics in sphere material handling.
11.Possibilities of simulating of handling processes.
12.Simulation languages and their application by simulating of the handling processes.
13.Simulation languages and their application by simulating of the handling processes.
2.Handling equipment - conveyors.
3.Handling equipment - cranes, industrial trucks.
4.Positioning equipments, storage unit and forming equipment.
5.Storage equipment, identification and control equipment.
6.Material flow and its analysis, methods of analysis of the material handling.
7.Mathematical expression of the handling-transport problem.
8.Project documentation of material handling systems.
9.Method Systematic Handling Analyses.
10.Logistics in sphere material handling.
11.Possibilities of simulating of handling processes.
12.Simulation languages and their application by simulating of the handling processes.
13.Simulation languages and their application by simulating of the handling processes.
Exercise
13 hod., compulsory
Teacher / Lecturer
Syllabus
1.Solution of handling-transport problem - index methods.
2.Solution of handling-transport problem - method VAM.
3.Solution of handling-transport problem - optical method.
4.Solution of handling-transport problem (individual tasks).
5.Solution of optimised material flow for determined production scheme.
6.Solution of optimised material flow for determined production scheme.
7.Solution of optimised material flow (individual tasks).
8.Analyses of material flow (processes and possibilities of realization).
9.The numerical simulation program (structure, function of objects).
10.The numerical simulation program (simulating of systems and subsystems).
11.The numerical simulation program (possibilities of model controls).
12.The numerical simulation program (animation of model).
13.Simulating of handling process.
2.Solution of handling-transport problem - method VAM.
3.Solution of handling-transport problem - optical method.
4.Solution of handling-transport problem (individual tasks).
5.Solution of optimised material flow for determined production scheme.
6.Solution of optimised material flow for determined production scheme.
7.Solution of optimised material flow (individual tasks).
8.Analyses of material flow (processes and possibilities of realization).
9.The numerical simulation program (structure, function of objects).
10.The numerical simulation program (simulating of systems and subsystems).
11.The numerical simulation program (possibilities of model controls).
12.The numerical simulation program (animation of model).
13.Simulating of handling process.
Elearning
eLearning: currently opened course