Course detail
Operation of Machine Tools
FSI-GPS-KAcad. year: 2023/2024
Learning outcomes of the course unit The course is aimed at gaining knowledge of machine tool operation. In the course, students will learn the basic elements for machine tool operation (machine components, machine control system, tool setting, workpiece alignment) including program preparation for machining with subsequent production of test workpiece.
Language of instruction
Czech
Number of ECTS credits
4
Mode of study
Not applicable.
Entry knowledge
Prerequisites and co-requisites Basic knowledge of machine tool construction, knowledge of engineering technology and electrotechnical qualification (50/1978) §4.
Rules for evaluation and completion of the course
The course is taught in the form of exercises in CNC machine tools accompanied by partial lectures. Exercise is completed by graded credit. 100% attendance and semester project is required for its acquisition.
Laboratory exercise: 13 x 3 hrs.
Laboratory exercise: 13 x 3 hrs.
Aims
Learning outcomes of the course unit The aim of the course is to master basic operations with machine tools. Teaching will be directed to a CNC turning center and a three-axis CNC vertical milling machining center with Siemens Sinumerik control systems.
Course graduates will learn the methods of working with CNC machine tools.
Course graduates will learn the methods of working with CNC machine tools.
Study aids
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
Marek J., et al. Konstrukce CNC obráběcích strojů IV. MM publishing, s.r.o., 2018. s. 352-364. ISBN: 978-80-906310-8-3.
Stulpa M. (2014). CNC Programování obráběcích strojů. GRADA. ISBN: 978-80-247-5269-3.
Stulpa M. (2014). CNC Programování obráběcích strojů. GRADA. ISBN: 978-80-247-5269-3.
Recommended reading
Marek J, Novotný L, Smolík J, Blecha P, Březina T, Mrkvica I, Sulitka M, et al. (2010). Konstrukce CNC obráběcích strojů (MM Speciál., p. 420). Praha: MM publishing, s.r. o.
Stulpa M. (2014). CNC Programování obráběcích strojů. GRADA. ISBN: 978-80-247-5269-3.
Stulpa M. (2014). CNC Programování obráběcích strojů. GRADA. ISBN: 978-80-247-5269-3.
Elearning
eLearning: currently opened course
Classification of course in study plans
- Programme N-VSR-K Master's 1 year of study, winter semester, compulsory-optional
Type of course unit
Laboratory exercise
13 hod., compulsory
Teacher / Lecturer
Syllabus
1. Milling and turning machining centers
2. Tooling and tool setting
3. Preparation of the workpiece and adjustment in the machine - milling machine
4. Preparation of the workpiece and adjustment in the machine - lathe
5. Siemens Sinumerik - basic operations
6. Fundamentals of programming in Siemens Sinumerik
7. Technological parameters and technological procedures
8. Processing of CNC program according to assignment for milling operations
9. Processing of CNC program according to assignment for turning operations
10. Production of the test piece according to the specification
11. Production of the test piece according to the specification
12. Production of test part according to specification
13. Presentation of results
2. Tooling and tool setting
3. Preparation of the workpiece and adjustment in the machine - milling machine
4. Preparation of the workpiece and adjustment in the machine - lathe
5. Siemens Sinumerik - basic operations
6. Fundamentals of programming in Siemens Sinumerik
7. Technological parameters and technological procedures
8. Processing of CNC program according to assignment for milling operations
9. Processing of CNC program according to assignment for turning operations
10. Production of the test piece according to the specification
11. Production of the test piece according to the specification
12. Production of test part according to specification
13. Presentation of results
Guided consultation
26 hod., optionally
Teacher / Lecturer
Syllabus
1. Milling and turning machining centers
2. Tooling and tool setting
3. Preparation of the workpiece and adjustment in the machine - milling machine
4. Preparation of the workpiece and adjustment in the machine - lathe
5. Siemens Sinumerik - basic operations
6. Fundamentals of programming in Siemens Sinumerik
7. Technological parameters and technological procedures
8. Processing of CNC program according to assignment for milling operations
9. Processing of CNC program according to assignment for turning operations
10. Production of the test piece according to the specification
11. Production of the test piece according to the specification
12. Production of test part according to specification
13. Presentation of results
2. Tooling and tool setting
3. Preparation of the workpiece and adjustment in the machine - milling machine
4. Preparation of the workpiece and adjustment in the machine - lathe
5. Siemens Sinumerik - basic operations
6. Fundamentals of programming in Siemens Sinumerik
7. Technological parameters and technological procedures
8. Processing of CNC program according to assignment for milling operations
9. Processing of CNC program according to assignment for turning operations
10. Production of the test piece according to the specification
11. Production of the test piece according to the specification
12. Production of test part according to specification
13. Presentation of results
Elearning
eLearning: currently opened course