Course detail

Reliability and Maintenance of Technical Systems

FSI-XS1-KAcad. year: 2023/2024

The course is focused on the latest knowledge of reliability and maintenance of technical systems. The student is acquainted with the terminology in reliability and maintenance, with standards and legislation in the field of reliability and also with management of reliability and maintenance. Teaching of the subject is complemented by an exercise where all the topics are properly practiced on examples from industrial practice. There is also a discussion of the results and conclusions in the exercises.

Language of instruction

Czech

Number of ECTS credits

6

Mode of study

Not applicable.

Guarantor

Ing. Daniel Zuth, Ph.D.

Department

Institute of Production Machines, Systems and Robotics (ÚVSSR)

Entry knowledge

Knowledge of mathematics and physics at a level of university study. Also, the knowledge of the aforementioned special field in a scope of the previous bachelor study is expected.

Rules for evaluation and completion of the course

The course consists of exercises and lectures. Exercise is completed by credit (awarded in the 13th week). To obtain it is required 100% participation in exercises and activity in exercises. Students will work out the individual work in the prescribed range and quality. Based on the quality of the work in the exercise, the student earns up to 30 points for the exam The work must be submitted in writing and checked and recognized by the teacher. The test is realized by written test, student can get up to 70 points from this test, where 30 points from exercises. Evaluation of the test result is given by the ECTS grading scale.
The student attendance is checked in tutorials (presence and activity). The 100% participation in tutorials is required, and in case of absence, the student will be obliged to compensate, the alternative attendance will be specified by the lecturer.

Aims

Learning outcomes of the course unit The aim of the course is to gain theoretical and practical knowledge of reliability and maintenance of technical systems.
Students will acquire extensive and comprehensive knowledge of reliability and maintenance of technical systems, which will enable them to engage in industrial engineering and electrical engineering in solving problems related to the issue.

Study aids

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

MYKISKA,Antonín. Bezpečnost a spolehlivost technických systémů. 1. vydání. Praha: České vysoké učení technické v Praze, 2006,206 s. Učební texty ČVUT v Praze. Fakulta strojní. ISBN 80-01-02868-2.
NOVÁK,M.; ŠEBESTA,V.; VOTRUBA, Z. Bezpečnost a spolehlivost systémů. 1. vydání. Praha: České vysoké učení technické v Praze, 2001, 150 s. Učební texty ČVUT v Praze. Fakulta dopravní. ISBN 80-01-02331-1.

Recommended reading

MOUBRAY, J. Reliability-Centered Maintenance. A Butterworth-Heinemann Title. 1999. 440 s. ISBN 978-0750633581.
KARPÍŠEK,Zdeněk. Matematika IV, statistika a pravděpodobnost. 3. doplněné vydání. Akademické nakladatelství CERM, s.r.o., 2007. 170 s. ISBN 978-80-214-3380-9.
SUMMERVILLE, N. Basic Reliability: An Introduction to Reliability Engineering. AuthorHouse, 2004. 136s. ISBN 978-1418424183.

Classification of course in study plans

  • Programme N-KSB-K Master's 1 year of study, summer semester, compulsory

Type of course unit

 

Guided consultation in combined form of studies

26 hod., compulsory

Teacher / Lecturer

Ing. Daniel Zuth, Ph.D.

Syllabus

1. Quality and reliability, the definition of reliability
2. Terminology and standards in reliability
3. Reliability indicators, reliability prediction analysis, means of increasing reliability
4. Reliability of repaired and non-repaired systems
5. Selected methods of reliability analysis
6. Operational reliability, reliability requirements
7. Reliability and maintenance management
8. Reliability tests, reliability information systems
9. Machine operation, the relationship of operation and maintenance, basic concepts of maintenance theory, standards, and legislation
10. Means of maintenance, Reengineering of maintenance
11. Reliability centered maintenance (RCM), Total Productive Maintenance (TPM)
12. Current trends in maintenance, technical diagnostics, modern approaches in maintenance, Industry 4.0
13. Organization and maintenance management

Guided consultation

52 hod., optionally

Teacher / Lecturer

Ing. Daniel Zuth, Ph.D.

Syllabus

1. Mathematical expressions for reliability, availability, maintainability and maintenance assurance
2. Analysis of reliability, analysis of reliability analyzes
3. Reliability analysis, analysis of reliability analyzes
4. Means of increasing reliability
5. Failures of technical systems, ways and consequences of failures
6. Computer support of maintenance management
7. Collection of operational reliability data
8. Completion and evaluation of technical reports (protocols).
9. Credit.