Course detail

Engineering Drawing

FSI-2K-AAcad. year: 2024/2025

The course provides students with knowledge in the field of creation of design documentation (mostly drawing) with a focus on technology and serial production. Teaching is focused mainly on the creation of drawings of cast, forged, welded and other components. Attention is paid to the calculation of functional dimensions and their tolerance. Emphasis is placed on the optimization of functional and technological dimensioning in the creation of complete drawing documentation of the assembly unit. Students will gain basic knowledge of current trends in the creation of documentation. The course also complements the basic knowledge of selected types of machine parts.

Language of instruction

English

Number of ECTS credits

4

Mode of study

Not applicable.

Guarantor

Ing. David Košťál, Ph.D.

Department

Institute of Machine and Industrial Design (ÚK)

Offered to foreign students

The home faculty only

Entry knowledge

Knowledge of the basics of design (basics of technical drawing, drawing documentation, dimensioning, geometric tolerances, basic principles of functional and technological dimensioning) and a clear knowledge of materials science (material selection and its standardization) are necessary.

Rules for evaluation and completion of the course

Terms of graded credit: attendance at seminars, elaboration of graphic projects (programs), graduation of tests and work tasks. Students must complete all four conditions. Final classification according to ECTS.
Attendance at seminars is mandatory and controlled. Maximum of two authorized absence without compensation of lesson are allowed.

Aims

Graduates will be able to create basic documentation of machine parts, whose semi-finished product is casting, forging or weldment, they will also have knowledge of the complete drawing documentation of the assembly unit, including basic dimensional calculations.
• knowledge and ability to process drawing documentation of products from cast, forged and welded semi-finished products
• the ability to create assembly unit documentation with an emphasis on ensuring function and interchangeability
• knowledge of preliminary calculation and documentation of gears
• basic knowledge of modern trends in the creation of design documentation

Study aids

BRANOFF, Theodore J. Interpreting Engineering Drawings. Eighth edition. USA: Cengage learning, 2014.

SIMMONS, C. H.; PHELPS, Neil a MAGUIRE, D. E. Manual of engineering drawing: technical product specification and documentation to British and international standards. Fourth edition. Amsterdam: Elsevier, 2012. ISBN 978-0-08-096652-6.

Prerequisites and corequisites

Not applicable.

Basic literature

GIESECKE, F. E. et al. Technical drawing with engineering graphics. Fourteenth edition. Harlow: Pearson, 2014. ISBN 978-1-292-02618-3. (EN)
SIMMONS, Colin H.; MAGUIRE, Dennis E.; PHELPS, Neil. Manual of engineering drawing: technical product specification and documentation to British and international standards. Butterworth-Heinemann, 2012. ISBN 978-0-08-096652-6. (EN)
SIMMONS, Colin H.; MAGUIRE, Dennis E.; PHELPS, Neil. (2012). Manual of Engineering Drawing - Technical Product Specification and Documentation to British and International Standards (4th Edition). Elsevier. Retrieved from https://app.knovel.com/hotlink/toc/id:kpMEDTPS03/manual-engineering-drawing/manual-engineering-drawing
Standards ISO, EN, ČSN
SVOBODA, Pavel a BRANDEJS, Jan. Výběry z norem pro konstrukční cvičení. Vyd. 6. Brno: Akademické nakladatelství CERM, 2019, 238 s. ISBN 978-80- 7623-010-1. (CS)

Recommended reading

GIESECKE, Frederick E et al. Technical drawing with engineering graphics. 14th ed. Boston: Prentice Hall, c2012, 1 sv. ISBN 978-0-13-509049-7.
JENSEN, Cecil Howard, Jay D HELSEL a Dennis R SHORT. Engineering drawing & design. 7th ed. Boston: McGraw-Hill, 2008, 1 v. ISBN 978-0-07-352151-0.

Classification of course in study plans

  • Programme B-STI-A Bachelor's 1 year of study, summer semester, compulsory
  • Programme B-STI-Z Bachelor's 1 year of study, summer semester, recommended course

Type of course unit

 

Lecture

13 hod., optionally

Teacher / Lecturer

Ing. David Košťál, Ph.D.

Syllabus

• Principle of castings production. Drawing documentation of cast parts. Drawing of the part whose semi-finished product is a casting and drawing of a casting. Technological design of casting.
• Tolerances and deviations in dimensional circuits. Full interchangeability method, compensation method. Information on other methods (statistical and group interchangeability).
• Welded parts and their drawing documentation. Technological requirements and technological design of welded parts. Materials suitable for welding technology.
• Overview of drawing documentation of volume-formed parts. Technological design of forgings.
• Drawing documentation of surface-formed parts.
• Soldered, glued and riveted joints.
• Requirements for documentation of plastic products.
• Modern trends in design documentation, drawing-free documentation, 3D printing.
• Design process algorithm. Overview of technical documentation requirements, list of items and technical report.
• Selected chapters from machine parts - drives and springs in terms of their documentation, bearings, mechanical couplings and basic mechanisms.

Computer-assisted exercise

26 hod., compulsory

Teacher / Lecturer

Ing. David Košťál, Ph.D.

Syllabus

• Application of geometric tolerances.
• Drawing documentation of cast components. Assignment of 1st program – casted part. Proposal for moulding of the casting.
• Tolerances and deviations in dimension chains - method of full interchangeability – examples.
• Tolerances and deviations in dimension chains – compensation method - examples.
• Dimensioning and accuracy of gears. Toothed gears. Preliminary calculation. Entering the 2nd program - gears.
• Drawing of weldment for welding and machining, drawings of weldment parts. Assignment of 3rd program - weldment.
• Assembly drawing, list of parts, technical report - basic rules.
• Introduction to documentation of volume formed parts.
• Drawing documentation of flat formed parts – examples.
• Overall evaluation of the submitted works. Check of programs and compositions completeness.