Czech

Not applicable.

Student should be able to
- differentiate functions of one and more variables,
- integrate functions of one variable,
- compute a freguency spectrum of continuos periodic signal,
- explain electromagnetic basic principles, solve DC, AC electric circuits with lumped parameters and magnetic circuits,
- describe the construction of induction motor, synchronous motor and DC motor,
- describe motors principle according to their electrical diagram,
- describe, modify and apply the basic design approach of magnetic circuit and winding to the permanent magnet DC motor and BLDC motor,
- calculate the parameters of the permanent magnet DC motor, BLDC motor (steady-state operation),
- draw and describe the waveform of magnetic flux density in the air-gap of permanent magnet DC motor, BLDC motor; sketch the slotting effect and the armature reaction effect,
- prepare 2D FEM model of the permanent magnet DC motor, BLDC motor under steady-state operation.

Deepening the knowledge of design of electric machines with a focus on winding analysis and electromagnetic calculations.

Graduate of the course is able to
- describe the magnetic field in the air-gap generated by the coil and m-phase winding,
- calculate the winding factors for the first and other harmonics of magnetic field,
- design the single and double-layer windings, distributed and concentrated windings,
- describe the principle of parasitic torques and torque pulsation,
- describe the additional losses caused by harmonic components of the magnetic field,
- perform the electromagnetic design of an induction motor,
- perform the electromagnetic design of synchronous motor with permanent magnets,
- describe the bearings of electric machines, including magnetic bearings,
- prepare 2D FEM model of the induction motor and permanent magnet synchronous motor.

Not applicable.

Not applicable.

BRÁZDA, M., STAŇA, R.: Výpočet asynchronního motoru. Brno: Výzkumný a vývojový ústav elektrických strojů točivých, 1973, 222 s. (CS)
HELLER, B., HAMATA, V.: Přídavná pole, síly a ztráty v asynchronním stroji. 1. vyd. Praha: Československá akademie věd, 1961, 202 s. (CS)
PETROV, G.,N.: Elektrické stroje 2. Academia, Praha 1982 (CS)
Philip B.: Electrical Steels for Rotating Machines. Institution of Engineering and Technology, 2002. ISBN: 978-0852969809 (CS)

BOLDEA, I., NASAR, S.,A.: The Induction Machine Handbook. Boca Raton: CRC Press LLC, 2002. 949 p. ISBN 0-8493-0004-5 (EN)
CIGÁNEK,J.: Stavba elektrických strojů, SNTL 1958 (CS)
KOPYLOV,I.,P. a kol.: Stavba elektrických strojů. SNTL, Praha 1988, 688 stran, typové číslo L25-C3-IV-41f/58667, první vydání (CS)
Pyrhonen J., Jokinen T., Hrabovcova V.: Design of Rotating Electrical Machines. Wiley; 2nd edition, 2013. ISBN: 978-1118581575 (EN)