Course detail

Electric Drive Systems

FSI-VAPAcad. year: 2025/2026

The subject is focused on the issue of electric drives in automation. Attention is focused first on modern semiconductor elements used in electronics (inverters) for electric drives. Furthermore, the electric drive is defined, the mechanics, heating and energetics of electric drives are discussed. A considerable area is devoted to the control and regulation of electric drives. Here, basic knowledge from the subjects that were taught earlier is used, which is developed on a theoretical and practical level towards the issue of electric drives. Subsequently, the basic properties of individual electric drives are addressed. These are drives with direct current motors, with asynchronous and synchronous motors. The student will also gain knowledge about drives with special motors, specifically stepper and linear motors. Considerable emphasis is given to the description of mathematical and simulation models of motors and drives as well as the analysis of the cascade control structure. Part of the theoretical knowledge is also the practical verification of selected properties of drives in a laboratory exercise.

Language of instruction

Czech

Number of ECTS credits

5

Mode of study

Not applicable.

Guarantor

doc. Ing. Miloš Hammer, CSc.

Department

Institute of Automation and Computer Science (ÚAI)

Entry knowledge

Knowledge of mathematics, physics, electrical engineering, mechanics and the basics of automatic control is assumed, at the level of university courses completed so far.

Rules for evaluation and completion of the course

The laboratory exercise ends with a credit (it is awarded in the 13th teaching week). In order to obtain it, 100% participation in the exercises, activity in the exercises and preparation, submission and recognition by the teacher of protocols (reports) from all designated laboratory exercises are required. In case of absence of the student for the exercise, it is necessary to replace the missing exercise. The method of compensation is determined by the teacher or the guarantor of the course. Further details are communicated and explained to students at the beginning of the semester. Obtaining a credit is a necessary condition for participation in the exam. The exam consists of a written part followed by an oral interview. In the written part, the student processes the five assigned questions. Orientation in the studied issue is checked in the oral part. The evaluation of the written part, the oral part and the overall evaluation of the exam is given by the classification scale according to ECTS.

Aims

The aim of the course is to acquire theoretical and practical knowledge and experience in the field of electric drives. This is an addition to previously completed subjects of a general nature, which are expanded towards use in automation and informatics. In the sense of the above annotation and outline, the student will acquire extensive and comprehensive knowledge in the field of electric drives, which will enable him to be involved in the solution of various technical problems in an erudite manner in industrial engineering and electrical engineering practice.

Study aids

Not applicable.

Prerequisites and corequisites

Not applicable.

Basic literature

KOBRLE, Pavel a PAVELKA,Jiří. Elektrické pohony a jejich řízení. Dotisk 3. vydání Praha: Česká technika - nakladatelství ČVUT, Praha. 2019. 200 s. ISBN 978-80-01-06007-0. (CS)
LETTL, Jiří, PAVELKA, Jiří a BAUER, Jan. Výkonová elektronika. Praha - Česká technika - nakladatelství ČVUT Praha, 2019. 228 s. ISBN 978-80-01-06514-3. (CS)
BOLDEA, Ion and Nasar S.A. Electric Drives. Third edition. Boca Raton: Taylor § Francis, CRC Press, 2016. 650 p. ISBN 9781498748209.  (EN)
WEIDAUER, J. and MESSER. R. Electrical Drives. Principles. Planning. Applications. Solutions. Siemens Aktiengesellschaft, Berlin. 396 p. ISBN : 978-3- 89578-434-7.  (EN)

Recommended reading

BOLTON, William Mechatronics: electronic control systems in mechanical and electrical engineering, UK, 2019. 669 p. ISBN 978-1-292-25099-1. (EN)
Dokumentace k simulačnímu prostředí Multisim 7. Dostupné z internetu v počítačové učebně ÚAI FSI VUT Brno.
KUS, Václav. Elektrické pohony a výkonová elektronika. 2. vydání Plzeň: Polypress s.r.o Karlovy Vary, 2016. 181 s. ISBN 978-80-261-0639-5. (CS)

Classification of course in study plans

  • Programme N-AIŘ-P Master's 1 year of study, winter semester, compulsory

Type of course unit

 

Lecture

26 hod., optionally

Teacher / Lecturer

doc. Ing. Miloš Hammer, CSc.

Syllabus

  1. Elements of electronic circuits, modern electronic elements used in electric drives.
  2. Basic semiconductor converters. Distribution. Rectifiers.
  3. Pulse converters. Inverters.
  4. Frequency converters. Microprocessor control systems.
  5.  Definition of electric drive. Advantages and disadvantages. Types of powered work machines.
  6. Kinematics and mechanics of electric drives. Warming and energetics of electric drives.
  7. Control of electric drives, analysis of control systems.
  8. Drives with direct current motors and motors with permanent magnets. Regulated drives.
  9. Drives with asynchronous motors.
  10. Drives with synchronous motors.
  11. Special types of electric drives. Stepper motors.
  12. Drives with linear motors. Mechanical components of electric drives.

Laboratory exercise

26 hod., compulsory

Teacher / Lecturer

doc. Ing. Miloš Hammer, CSc.

Syllabus

  1. Modern electronic elements for control and regulation.
  2. Design and analysis of a DC voltage network source.
  3. Two-position regulation.
  4. Regulators with impulse output.
  5. PID controller with operational amplifiers.
  6. Speed ​​control of the DC motor, the controller is a PLC.
  7. Controlled drive with asynchronous motor (frequency converter, PLC, operator panel)
  8. Linear control with encoder (Maxon).
  9. Linear control with limit switches.
  10. Drive speed control with encoder.
  11. Matlab – Simulink, library functions, selected models, practical real examples.
  12. Matlab - Simulink model of a DC machine with external excitation and permanent magnets, current loop model of a DC motor with an inverter, feedback model of a superior speed loop.