Course detail
Sensors
FEKT-BPC-SNIAcad. year: 2025/2026
The course provides students with an overview of the basic principles of sensors used, their parameters and designs. It covers instrumentation, concepts and procedures for measuring physical (non-electrical) quantities. Using examples from industrial practice, it presents in particular the specifics of these measurements and their differences from conventional electronic measurements of electrical quantities.
Language of instruction
Czech
Number of ECTS credits
6
Mode of study
Not applicable.
Guarantor
Entry knowledge
The student must have knowledge of physics, mathematics and electrical circuits at the level of 1st year Bc. studies.
Work in the laboratory is conditioned by a valid qualification of "instructed worker" according to Decree No. 50/1978 Coll., which students must obtain before starting the course. Information on this qualification is given in the Dean's Guideline Familiarizing Students with Safety Regulations
.
Work in the laboratory is conditioned by a valid qualification of "instructed worker" according to Decree No. 50/1978 Coll., which students must obtain before starting the course. Information on this qualification is given in the Dean's Guideline Familiarizing Students with Safety Regulations
.
Rules for evaluation and completion of the course
Evaluation laboratory 0 - 30
Oral part of exam 0 - 70
The definition of supervised teaching and the way it is carried out is set out in the annually updated decree of the course guarantor (introductory lecture). Laboratory instruction is compulsory; one missed laboratory exercise may be made up by arrangement.
Oral part of exam 0 - 70
The definition of supervised teaching and the way it is carried out is set out in the annually updated decree of the course guarantor (introductory lecture). Laboratory instruction is compulsory; one missed laboratory exercise may be made up by arrangement.
Aims
The aim of the course is to familiarize students with the basics of modern ways and methods of measuring physical quantities, which represent up to 95% of all measured quantities in both laboratory and industrial practice. To show the importance of sensors and measurement of physical (technological) quantities in technical and non-technical fields.
Absovent is able to:
- Know the principles of basic type of the sensors
- Know the principles of methods for measuring mechanical quantities (dimension, velocity, acceleration, force, torque), flow, temperature, radiation
- Use electrical measuring instruments
- Design and implement measurement of physical quantities
- Know the procedures for processing the measured data and their evaluation
- Make qualified conclusions about the specific measurement
Course graduate should get basic knowledges and facilities in sensor field and the most commonly measured non-electrical quantities, include measurement concept design and results process and evaluaiton.
Absovent is able to:
- Know the principles of basic type of the sensors
- Know the principles of methods for measuring mechanical quantities (dimension, velocity, acceleration, force, torque), flow, temperature, radiation
- Use electrical measuring instruments
- Design and implement measurement of physical quantities
- Know the procedures for processing the measured data and their evaluation
- Make qualified conclusions about the specific measurement
Course graduate should get basic knowledges and facilities in sensor field and the most commonly measured non-electrical quantities, include measurement concept design and results process and evaluaiton.
Study aids
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
ĎAĎO,Stanislav a KREIDL, Marcel: Senzory a měřicí obvody. Praha: ČVUT, 1996. ISBN 80-01-01500-9 (CS)
RIPKA, Pavel, ĎAĎO, Stanislav, KREIDL, Marcel a NOVÁK, Jiří. Senzory a převodníky. Praha: Vydavatelství ČVUT, 2005, 135 stran. ISBN 80-01-03123-3 (CS)
RIPKA, Pavel, ĎAĎO, Stanislav, KREIDL, Marcel a NOVÁK, Jiří. Senzory a převodníky. Praha: Vydavatelství ČVUT, 2005, 135 stran. ISBN 80-01-03123-3 (CS)
Recommended reading
Webster J. G.: Measurement, Instrumentation, and Sensors Handbook: Two-Volume Set. Taylor&Francis Inc., ISBN 978-1439848838 (CS)
Classification of course in study plans
- Programme BPC-AMT Bachelor's 0 year of study, winter semester, elective
Type of course unit
Lecture
26 hod., optionally
Teacher / Lecturer
Syllabus
1) Introduction, transducers fundamentals
2) Basic physical effect
3) Displacement sensors
4) Tachometers and velocity sensors, accelerometers, gyros and attitude sensors
5) Load cells, torque sensors, pressure transducers
6) Flowmeters
7) Thermometers
8) Radiation pyrometers
9) Optical detectors
10) Nuclear radiation detectors
11) Magnetometers
12) Chemical sensors
2) Basic physical effect
3) Displacement sensors
4) Tachometers and velocity sensors, accelerometers, gyros and attitude sensors
5) Load cells, torque sensors, pressure transducers
6) Flowmeters
7) Thermometers
8) Radiation pyrometers
9) Optical detectors
10) Nuclear radiation detectors
11) Magnetometers
12) Chemical sensors
Laboratory exercise
39 hod., compulsory
Teacher / Lecturer
Syllabus
General information
The content of the laboratory exercises of the SNI course is an introduction to selected types of sensors and measurement methods in the form of 8 laboratory exercises. Two students work together on one laboratory exercise. Thus, each pair of students completes only 4 laboratory exercises during the semester. For the first lab problem 3 exercises are available, each subsequent problem must be measured in 2 exercises. The assessed student outcome is 3 lab reports and 1 public presentation of the measured problem. The laboratory report of the first and second assignment will be prepared jointly by both students. The third problem will be prepared by the first student of the pair as a protocol, and the second student as a presentation. For the fourth problem, the second student will turn in the protocol and the first student will present the problem.
1. Temperature
2. Vibration
3. Position
4. Speed
5. Ionizing radiation
6. Flow rate
7. Mechanical stress
8. Ultrasound
The content of the laboratory exercises of the SNI course is an introduction to selected types of sensors and measurement methods in the form of 8 laboratory exercises. Two students work together on one laboratory exercise. Thus, each pair of students completes only 4 laboratory exercises during the semester. For the first lab problem 3 exercises are available, each subsequent problem must be measured in 2 exercises. The assessed student outcome is 3 lab reports and 1 public presentation of the measured problem. The laboratory report of the first and second assignment will be prepared jointly by both students. The third problem will be prepared by the first student of the pair as a protocol, and the second student as a presentation. For the fourth problem, the second student will turn in the protocol and the first student will present the problem.
1. Temperature
2. Vibration
3. Position
4. Speed
5. Ionizing radiation
6. Flow rate
7. Mechanical stress
8. Ultrasound