Přístupnostní navigace
E-application
Search Search Close
study programme
Original title in Czech: Pozemní stavbyFaculty: FCEAbbreviation: DKC-SAcad. year: 2020/2021
Type of study programme: Doctoral
Study programme code: P0732D260018
Degree awarded: Ph.D.
Language of instruction: Czech
Accreditation: 8.10.2019 - 8.10.2029
Mode of study
Combined study
Standard study length
4 years
Programme supervisor
prof. Ing. Miloslav Novotný, CSc.
Doctoral Board
Chairman :prof. Ing. Miloslav Novotný, CSc.Councillor internal :prof. Ing. Jitka Mohelníková, Ph.D.doc. Ing. Vít Motyčka, CSc.prof. Ing. arch. Alois Nový, CSc.prof. Ing. Miroslav Bajer, CSc.prof. Ing. Jiří Hirš, CSc.prof. Ing. Milan Ostrý, Ph.D.prof. Ing. Jan Pěnčík, Ph.D.doc. Ing. Aleš Rubina, Ph.D.prof. RNDr. Ing. Petr Štěpánek, CSc., dr. h. c.Councillor external :Ing. Petr AndrysIng. Petr Sedlák, Ph.D.Ing. Vladimír Tichomirov, CSc.prof. Ing. Karel Tuza, CSc.
Fields of education
Study aims
The aim of the doctoral study program Building Constructions is to provide outstanding graduates of the master's program with specialized university education and scientific training in selected current areas of the field. The study is focused on complex scientific preparation, methodology of independent scientific work and on the development of knowledge in the field of the theory of building constructions. and construction, measuring and diagnostic methods, modeling of physical processes and tasks of building physics. The scientific preparation in this study program is based on mastering the initial theoretical disciplines of the natural science base and theoretical and scientific disciplines of the relevant focus. Part of the study is also the involvement of students in the preparation and solution of national and international scientific research projects, presentation of results at national and international scientific and professional conferences and their publication in professional and scientific foreign and domestic journals. During his / her studies, the student gains new theoretical knowledge, his / her own experience from the preparation, implementation and evaluation of experiments and necessary practical knowledge also thanks to close cooperation with construction practice and also through foreign internships at cooperating foreign universities or research workplaces. In the final phase of the study, the student synthesizes all theoretical knowledge gained as well as the results of his / her own creative work and elaborates his / her doctoral dissertation, which emphasizes the exactness and formulation of concrete benefits for further development of the studied field.
Graduate profile
Graduate of the PhD study program Building Construction is a versatile theoretically and professionally equipped expert who has mastered the issue of specialization at a high level of his knowledge and is capable of independent creative work. He is ready to work professionally and to hold independent higher positions in the field of research and development of new technologies in the sector of building construction of buildings, but also in designing companies, resp. in state administration. He obtained comprehensive theoretical and professional training for independent solution of technical problems and creative scientific work. Based on the acquired knowledge, experience, skills and knowledge, it is ready for scientific and creative activities, both independently and in teams at national and international level. Thanks to the current trends in the field of building construction and close cooperation with foreign universities, the graduate of the doctoral study program fulfills the prerequisites for further professional career and professional academic growth, even abroad. During his / her studies the graduate practically acquires and acquires pedagogical abilities, which he / she can use in pedagogical-scientific activities at educational institutions dealing with the problems of building construction in the Czech Republic and thanks to acquired language knowledge also abroad.
Profession characteristics
Substantial development of theoretical and experimental abilities allows graduates of the PhD study program Building Constructions independent creative activity related mainly to building construction including related specializations especially in the field of building technical equipment (HVAC, heating, air conditioning), advanced special building technologies, building physics building acoustics and daylighting of buildings), special building remediation, fire safety of buildings and environmentally advanced buildings. The graduate is capable of independent creative activity especially in the field of research and development - he / she is professionally equipped and able to solve complex problems independently, eg when optimizing the selection of suitable materials or their compositions taking into account social needs, operational requirements, risks, economic impacts and environmental impacts. The application of graduates of the Building Constructions program is in wide areas of the building industry consisting eg in the design of special elements and constructions of Building constructions including verification of their functionality and reliability using both experimental procedures and numerical models. Graduates are well placed to work in the academic sphere and in other institutions dealing with science, research, development and innovation. Its knowledge of foreign languages in the area of its expertise is a prerequisite for eventual work abroad. After fulfilling the length of practice and legal conditions, he can be authorized by ČKAIT as a civil engineer in the field of Building Construction, Environmental Engineering or Energy Auditing. According to internal statistics, the long-term employability of graduates of the existing PhD study program Building Constructions in Practice is practically 100%, not only after graduation, but also at early graduation. The graduates appreciate in practice the ability to solve complex professional problems independently and the ability to communicate at least in English. After graduation, many graduates of DSP Civil Engineering are employed at the faculty and subsequently develop their creative abilities, reduce the average age of the faculty teachers and subsequently habilitate, eventually complete the appointment procedure and thus guarantee the development and future of the faculty.
Fulfilment criteria
Fulfillment of the subjects of the individual study plan, successful completion of the state doctoral examination, foreign experience, relevant creative activity and successful defense of the dissertation.
Study plan creation
The rules and conditions for the creation of study plans of study programs carried out at the Faculty of Civil Engineering of the BUT define: Rules of BUT study programs (www.vutbr.cz/uredni-deska/vnitrni-predpisy-a-dokumenty), which according to Article 1, paragraph 1, point: c) defines the processes of creation, approval and changes of study program proposals before their submission for accreditation to the National Accreditation Office for Higher Education, d) lays down the formal requirements for study programs and courses, e) defines the obligations of study program and subject guarantors, f) defines the standards of study programs at BUT, g) defines the principles of quality assurance of study programs. Study and Examination Regulations of the Brno University of Technology (www.vutbr.cz/uredni-deska/international-details-and-documents) Details of the conditions for study at the Faculty of Civil Engineering of the BUT are governed by the Dean's Directive ) The PhD student studies according to an individual study plan, which is elaborated by the supervisor in cooperation with the PhD student. The individual study plan is binding for the doctoral student. It specifies all duties set in accordance with the BUT Study and Examination Regulations that a doctoral student must fulfill in order to successfully complete his / her studies. During the first three semesters, the doctoral student consists of compulsory, compulsorily elective or at the same time, it is intensively engaged in its own study and analysis of knowledge in the field determined by the topic of the dissertation and continuous publication of the knowledge and results obtained in this way. In the following semesters, the doctoral student focuses more on research and development related to the topic of the dissertation, on the publication of the results of his / her creative work and on his / her own dissertation. By the end of the fifth semester, the doctoral student has passed the state doctoral examination. The doctoral student is also involved in pedagogical activities, which is a part of his scientific preparation. The individual study plan includes scientific outputs in individual years: - regular publishing activity (Juniorstav and similar), - participation in scientific conferences at home and abroad, - for defense of DZP it is necessary to publish - min. 2x Scopus or 1x WOS with impact factor.
Availability for the disabled
At the Faculty of Civil Engineering, BUT, barrier-free access to all teaching rooms is currently provided. However, students must be physically fit to be qualified as a civil engineer. In practically oriented laboratory teaching, they must be able to operate measuring instruments and similar laboratory equipment independently without endangering themselves or their surroundings. BUT provides support to students with specific needs, for details see Guideline 11/2017 (www.vutbr.cz/uredni-deska/international-documents-and-documents/-d141841/uplne-zneni-smernice-c-11- 2017-p147550). In order to promote equal access to higher education, BUT incorporates the Alfons Advisory Center, part of the BUT Institute of Lifelong Learning, to provide guidance and support services to applicants and students with specific educational needs. Specific educational needs include learning disabilities, physical and sensory disabilities, chronic somatic illness, autistic spectrum disorders, impaired communication skills and mental illness (alfons.vutbr.cz/o-nas). Students are provided with information concerning the accessibility of study programs with respect to the specific needs of the applicant, information about the architectural accessibility of individual faculties and university parts, about accommodation at the BUT dormitory, about the possibilities of adapting the admission procedure and adapting the study itself. Other services of the Center for Students with Special Educational Needs also include interpreting and rewriting services, or assistance services - guiding, spatial orientation, in order to enable these students to demonstrate their skills and knowledge in the same way as other students. This is done through the so-called adaptation of study, ie by appropriate adjustment of the study regime, which cannot be understood as a simplification of the content of study or relief of study obligations.
What degree programme types may have preceded
The PhD study program Building Construction is a follow-up to the follow-up master study program Civil Engineering, especially the study fields Building Construction and Construction Realization, respectively. as well as other fields of study and nursing master's degree programs. After the accreditation of the follow-up master's degree programs in Civil Engineering - Building Constructions and Civil Engineering - Realization of constructions for these programs.
Issued topics of Doctoral Study Program
Study of moisture propagation in building structures, description of liquid phase and water vapor propagation through the pore system of building materials under various boundary conditions, experimental verification of moisture status by measurement. As part of the study, the student will get acquainted with modern ways of describing both the environment for the spread of the environment and the boundary conditions valid for the Central European climate.
Tutor: Šťastník Stanislav, prof. RNDr. Ing., CSc. Ph.D.
Analysis of dynamic boundary conditions of soil in relation to ground heat exchangers of heat pumps and possibilities of operational control and determination of heat exchanger performance. Application of Z-meter for experimental verification of thermal processes in soils.
Tutor: Hirš Jiří, prof. Ing., CSc.
Nearly zero nergy buildings use mainly renewable energy. The potential of this energy is variable in time as well as the energy demand in buildings. Analysis of the dynamics of energy flows in buildings will optimize choice of energy sources and efficient use of energy. The analysis will be used to set up a system for monitoring and controlling and designing appropriate technologies.
This is an experimental monitoring exposure to microwave radiation on building materials. Monitoring temperature fields, depending on the humidity and type of building materials and the intensity of microwave radiation. Numerical simulations of these processes.
Tutor: Šuhajda Karel, doc. Ing., Ph.D.
Research on intelligent systems management on Building Services Systems. Focus on energy efficiency, indoor environmental quality and the creation of data inputs for control systems with the use of dynamic modeling of the behavior of buildings and HVAC systems. Intelligent energy distribution between buildings.
Definition of optimisation model of a structure for: 1. design of a member, 2. strengthening of existing member, 3. design and strengthening of a structure. Calculation variant: stochastic, deterministic (according to the application class of the tasks), type of the restraining conditions, classes the target functions.
Tutor: Štěpánek Petr, prof. RNDr. Ing., CSc., dr. h. c.
Experimental analysis and design of green facade systems. Monitoring the influence of the green facade on the indoor microclimate of the building. Analysis and possibilities of using specific vegetation. Research and development in the field of facade panels.
Tutor: Novotný Miloslav, prof. Ing., CSc.
Every architectural detail created by an individual is unique. If the detail becomes universal, it becomes obsolete and therefore must be always different to be irreplaceable. In recent years, interesting details of columns, walls, ceilings or stairs have been created in the architecture. This is possible with new technologies and new materials. The role of the PhD student will be to focus on this rapid development. It is sad how few publications deal with this topic comprehensively. The doctoral student will also be directly involved in teaching in the subject Detail in Architecture I. and II.
Tutor: Dulenčín Juraj, doc. Ing. arch., Ph.D.
In the history of housing was always a family villa in a privileged position. Reflect the social status of the owner, and has responded to the crucial family as the basis of society. Often has been a hot topic in the architectural creation of the most famous architects. Dynamic way to contemporary life, rapidly changing lifestyle and the reflections on the relevance of the question of the timeliness of the family villa in the nearest future.
Tutor: Menšíková Naděžda, doc. Ing. arch., CSc.
reinforcing of concrete and masonrystructures, internal FRP reinforcement, selected design problems, prestressed and non-prestressed variant
PhD thesis focuses on the research use of land for energy for heating and cooling. The scope of work will be theoretical and experimental investigation of the thermal interaction between an building and ground and an optimal design of ground and foundation exchangers. The aim is to streamline obtaining geothermal energy of the elements of foundation structures and to develop a methodology for their design in the Czech Republic. The simulations can use the softwares CalA, TRNSYS, ANSYS Fluent. Optimization methods will be used.
Tutor: Šikula Ondřej, prof. Ing., Ph.D.
The topic of the doctoral dissertation is focused on the hydraulics of water installations, measurement of flows and pressure losses in water installations, their evaluation and comparison with the calculated flow rates and pressure losses.
Tutor: Vrána Jakub, Ing., Ph.D.
The aim of the work is to describe the influence of moisture penetrating through cracks and holes into ETICS thermal insulation systems on the building physical or mechanical properties of ETICS. The goals are to be achieved on the basis of experimental measurements performed "in situ", laboratory performed epimerimental measurements, numerical simulations and their mutual comparisons.
PhD thesis focuses on the modeling and simulation of intelligent buildings and smart regions. Effective use and placement of elements of ventilation, heating and cooling in buildings and their optimal control system. Systems, equipment and strategies for energy storage. Multicriteria optimization methods will also be used.
The doctoral thesis is focused on modeling and simulation of the effect of shading structures and vegetation on the thermal load of buildings. The use of ANSYS Fluent, OpenFOAM, TRNSYS and DesignBuilder software is expected. Attention will also be paid to optimization of control systems. Multicriteria optimization methods will also be used.
Modelling the energy balance of buildings using modern computational techniques. Analysis of the problem, creating a mathematical model, verification of mathematical models of real objects.
Tutor: Horák Petr, doc. Ing., Ph.D.
Construction, technological, economic and ecological analysis of modular construction technology in contrast with other selected technologies in the field of residential buildings. The aim of the topic is a systematic evaluation of the efficiency of modular construction on the basis of predefined criteria.
Tutor: Šlanhof Jiří, Mgr. Ing., Ph.D.
The field of Building Services is currently progressively developed thanks to the technological boom. New technologies, such as 3D printing or microfiber, allow the development of new heat exchangers. The topic of doctoral study will deal with the development of new types of heat exchangers from non-traditional materials.
The dissertation thesis is based on theoretical and experimental research. This theoretical research is aimed at numerical simulation of acoustics pressure in a building environment with the goal development of advanced building components for the absorption of sound waves. The experimental way is used for validation of the theoretical way. The expected result of the dissertation thesis is extension current state of building acoustics about new knowledge.
Tutor: Plášek Josef, Ing., Ph.D.
Theme of dissertation thesis is aimed at development, validation, verification and theoretical-experimental application of numerical models describing heat transfer in space and time. These space-time deterministic numerical models based on fundamental laws of Thermodynamics are useful in Civil Engineering for creation of indoor climate in buildings as well as for development of advanced energy systems in building.
Experimental Analysis and design of multi-layer ventilated facade systems. Monitoring the impact of ventilated air gaps on the inside of the building microclimate.
The thesis is focused on modeling and simulation of buildings storing heat and cold in heat accumulators using phase change melting and solidification substances - PCM. The aim is to bridge the mismatch between conventional and alternative energy supply with the building's energy consumption curve. Attention will also be paid to systems and methods for optimum energy storage accumulation in the building. Multicriteria optimization methods will also be used.
Processes of thermal flow in building structures can be composition of material layers can be modified by the composition of material layers. The analysis of internal thermal and moisture processes and effective design of a structure is able to affect its energy demand substantially. This issue is also important for showing objects with controlled internal temperature.
PhD thesis is focused on the optimization of Thermo Active Building Structures (TABS) used for heating and cooling buildings. Assumes the use of simulation methods, laboratory experiment and measurement INSITU. The aim is to provide recommendations for optimal design and control of TABS. The simulations can use the softwares CalA, TRNSYS, ANSYS Fluent. Multicriteria optimization methods will also be used.
Experimental verification of the possibilities of rehabilitation of building structures and their parts using microwave radiation especially in the areas of removal of excess moisture and destruction of biological corrosion.
The efficiency and utility features solar heat storage tank are bound to used heat-storage materials and method of use of the internal energy. Temperature determines the rate of working fluid losses. The object of study are suitable materials for the construction of a solar heat storage tank (sensible heat, phase change materials), their physical properties. The objective is to model, as well as experimental evidence functionality.
Research of elements and systems of buildings services as heating, ventilation and air conditioning (HVAC) will be conducted in order to achieve a thermal comfort in buildings at the minimum operating energy consumption. HVAC systems research will focus on optimizing of their design and operation with the use of low-potential thermal energy sources. The research will be conducted in its theoretical part by development of new mathematical-physical models, and by laboratory experiments and in situ measurements in an experimental part by using PIV method.
Topic of doctoral thesis focuses on the application and verification of theoretical research methods airflow in buildings and external aerodynamics of buildings with the current transfer of moisture. The simulations can use the software Fluent, CFX, or OpenFOAM. Multicriteria optimization methods will also be used.
modern methods of strengthening, prestressing, additional reinforcement
Study of heat and moisture transfer in 3D printed structures of building envelopes. Including consideration of production technology.
Tutor: Bečkovský David, doc. Ing., Ph.D.
The design of optimalization wooden structures with the wiew of enviromental sciens, qualities and utiliti of wooden houses and solution design details.
Study the properties of thermal insulation on basis termal-reflective foils and their use in construction, passive and energy-saving houses, production halls, sports facilities etc. The subject is the study of transport phenomena of heat insulators, physical properties and comparing with conventional insulators. Theme includes validation of design methods installation thermal insulation in buildings.
The topic for doctoral studies is focused on the verification and evaluation of the processes associated with construction according to the principles of sustainable development. Specifically, these are processes associated with the structural units of green roofs. The analysis of already implemented constructions is of great importance for the development of other structural elements of green infrastructure. The possibility of saving the energy invested, the use of mechanization and human resources will be retrospectively evaluated on the realized roofs.
Tutor: Mohapl Martin, Ing., Ph.D.
Timber hybrid structures have considerable potential for further development of wooden buildings and their wider application for buildings can be evaluated as a contribution to sustainable development.
Tutor: Lavický Miloš, doc. Ing., Ph.D.
The dissertation is focused on the architectural conservation. The student specifies his/her project according to his/her preferred topic (typology of architectural heritage, conservation areas, social and legislative issues, artistic approach, technology) and method (microanalysis, comparative analysis, historiographical analysis).
Tutor: Guzdek Adam, Ing. arch., Ph.D.
Tubular light guides are continuously improved because of the ever-rising requirements put onto thermal comfort in the interiors of buildings. This has some side effects, like the depreciation of their physical properties. Therefore it is required to create a comprehensive overview of building physical aspects of tubular light guides, which can be based on experiments and computer simulations. The conclusions then are bound to be incorporated into the concept of a modified tubular light guide.
Tutor: Vajkay František, Ing., Ph.D.
With the possibility of the use of composites from recycled polymers, such as thermal insulation block, there is a need to modify and improve existing rheological models. The development of models is depending on the way stress. The pressure stress is for that group of materials specifically load. Development models will be made on the basis of experimental prototypes monitoring the test samples with subsequent verification of FEA mathematical modeling.
Tutor: Pěnčík Jan, prof. Ing., Ph.D.
Condensation of water vapor on the inner surface of the window is most often a manifestation of insufficient solution of the detail of the connecting joint. The task is to model and optimize the structure of structures so that these negative phenomena do not occur. The evaluation will be carried out at the level of the risk of mold growth as well as at the dew point temperature.
Tutor: Kalousek Miloš, doc. Ing., Ph.D.
The doctoral thesis aim is a development of a connection between the Life Cycle Assessment (LCA) methodology of selected building material and Building Information Management (BIM) into one functional unit, also called an Active-BIM approach. The work will include an analysis of parameters and a comprehensive methodology for data transfer between individual tools. The benefits of the results will be demonstrated in a case study with emphasis on the use of recycled materials.
It is ever more common for structures to be built under difficult conditions which hinder the construction process and the optimal operation of construction site equipment. This is primarily due to the denseness of the built-up areas in the centres of large cities, the impossibility of excluding public transport vehicles from passing in close proximity to building sites, legislative restrictions with regard to ecology and construction site safety in such areas, and so on. This dissertation thesis will concern the analysis of the contemporary state of affairs regarding construction site equipment in densely built-up areas. It will deal with the negative impacts such areas have on the efficiency of building work, as well as the possible measures that can be taken to lessen the effect of such impacts during the continuous building of structures in difficult conditions.
Tutor: Motyčka Vít, doc. Ing., CSc.
The dissertation is focused on finding answers to whether folk architecture exists in the 20th century and what it looks like. Does it still occur around us, or does this sign end up in open-air museums and museums? Is it possible to find objects in our settlements and landscape that will one day add to the architecture of the 19th century countryside?
In engineering practice it is easy to come across failures of both water vapour permeable and non-permeable flooring finishes, where these failures are often caused by excess moisture. Whereas there are various flooring solutions available, it is expected that throughout the solution of the work the manifestations and phenomena causing the failures are going to be described for the most widely used floor finishes.
Kitchen evolution analysis in connection with solution of arrangement present sophisticated form. Ergonomics and anthropometry in kitchen. Tendency to the future. Design standards - assessment, recommendation.
Tutor: Košíčková Ivana, Ing. arch., Ph.D.
The dissertation will deal with the evaluation and protection of the landscape character not only of protected areas, but also of the precincts and structures of urban areas of Czech settlements. Multicriteria analysis will analyze the types of urbanized areas in our country and our neighbors.
Old people housing forms, building typology as a follow-up to provide services. Evolution analysis, present trends, available and dignified housing for future.
Work will consider specific proposals of container wooden houses. It will be working both on the structure of the container, but also on the casing itself and bonding of the individual containers in a single unit. Will be constructed partial construction details.
Daylight factor calculations do incorporate the so-called pollution coefficients for the exterior, resp. the interior side of the daylighting system. The values of these coefficients were determined in 1994. Since then these coefficients are unchanged, despite the advances in lifestyle (number of cars on the road, fuel used in heating, etc.). Therefore the aim of the work would be to monitor how the actual lifestyle affects the pollution of surfaces and glazing, and lighting comfort in short and long terms.
The work is a contribution in the field of sustainable development in construction and is specifically focused on research into the use of recycled waste plastics, for use in building elements, such as ceramic fittings. The scope of work is the study of properties and processing of recycled waste and optimization of their useful properties for use in building elements.
DhD thesis will focus on surveys of wood elements and structures, analysis of the causes of damage and resulting methods of reconstruction.
The topic of the thesis will be research and development of modern precast structures of piece building materials.
Changes in ownership and transition to the market economy after the year 1989 led to the breakdown of many production enterprises including agrarian. Derelict buildings even the whole areas became source of economic, social and environmental troubles. What is the real state and how are the chances of their revitalization and comeback to the cultural landscape from the point of view of architecture and regional planning?
Tutor: Dýr Petr, doc. Ing. arch., Ph.D.
Cement fiber boards, which are now mainly used for additional structures, can also be used for interior staircases. However, their use must be substantiated by material tests with regard to another way of stressing the boards, which would be loaded in their centreline plane, as the case may be. This comprehensive topic assumes both material testing with possible modification of the manufacturing process and composition, as well as the analysis of stair parts by means of numerical modeling (FEA).
In extreme climate, especially in the South Pole, where a large number of polar station buildings are located, there are more disturbances than in the normal climate in the Czech Republic. It is therefore interesting to design and verify modern solutions. In-situ examination is expected during the study.
Thermal energy storage is important for overcoming of mismatch between supply of renewable energy and energy demand. Thesis will be focused on the development of latent heat thermal energy storage for use in building structures and building services. Student will cooperate with supervisor and solve project supported by Czech science foundation.
Tutor: Ostrý Milan, prof. Ing., Ph.D.