Detail předmětu

Characterization Methods of Inorganic Materials

FCH-MA_CMIMAk. rok: 2023/2024

The course is focused on theoretical and practical introduction of instrumental techniques for sample preparation and material analysis - X-ray diffraction, scanning electron microscopy, photoelectron spectroscopy, methods of thermal analysis (TG-DTA, EGA, TDA, DSC, CM, calorimetric analysis, etc.). ), methods of determination of particle size distribution, methods of determination of specific surface, methods of determination of thermal conductivity coefficient, elemental analysis by XRF, ICP, AAS, combustion elemental analysis, UV-VIS, IR spectroscopy, Ramann spectroscopy, ion chromatography and mechanical properties measurement. The students are acquainted with the principle of the method, its applicability, requirements for sample preparation and methods of evaluation of results obtained.

The practical part of the course is focused on the choice of a suitable method, appropriate sample preparation and correct evaluation of the results obtained.

Jazyk výuky

angličtina

Počet kreditů

5

Garant předmětu

doc. Ing. Tomáš Opravil, Ph.D.

Zajišťuje ústav

Ústav chemie materiálů (ÚCHM)

Nabízen zahraničním studentům

Všech fakult

Vstupní znalosti

The fundamentals of analysis techniques, physics and structure of materials.

Pravidla hodnocení a ukončení předmětu

The lecture part is finished by an oral exam, to which the student can enroll only after submitting all the protocols in the required quality. All reports must be submitted at least one day before the exam date. Evaluation of protocols makes up 30% of the final grade. At the oral exam, each student receives several questions mapping the content of the whole curriculum.
The control of the course is realized during the semester by elaboration and evaluation of protocol from each practical exercise. Attendance at lectures is recommended.

Participation in all practical tasks is obligatory. Unexcused absence is a reason for not to give credit. For each group in printed form, one protocol will be submitted within seven days after the practicing session. If the protocol is not drawn up to the required level, it will be returned for revision. Credit will be awarded after submission and evaluation of all protocols in the required quality. If this is not done by the end of the regular exam period, the group will repeat the next semester.

Učební cíle

The aim of the course is to introduce students with the methods and principles of modern instrumental analysis of inorganic samples, including techniques of their preparation and evaluation of the results.

The aim of the practical part is to try the preparation of samples for individual methods,choose methods of their measurement and evaluation of results measured.
Ability to work with samples of technically important groups of materials and knowledge about principles of discussed techniques and evaluation of results obtained by these techniques.

The practical part will be focused on correct sample preparation and interpretation of measured results.

Základní literatura

Cloud G.: Optical Methods of Engineering Analysis (EN)
Goldstein J et al.: Scanning Electron Microscopy and X-Ray Microanalysis: A Text for Biologists, Materials Scientists, and Geologists (EN)
Chatterjee S. K.: X-Ray Diffraction: Its Theory and Applications (EN)

Doporučená literatura

Pertile E., Čablík V.: Instrumentální metody analýzy (EN)
Pospíšil M.: Instrumentální metody výzkumu a analýzy I, v Praze, vydavatelství ČVUT, 2004 (EN)

Elearning

eLearning: aktuální otevřený kurz

Zařazení předmětu ve studijních plánech

  • Program NKCP_CHTM magisterský navazující 1 ročník, zimní semestr, povinný
  • Program NPCP_CHTM magisterský navazující 1 ročník, zimní semestr, povinný
  • Program NPAP_ENVI magisterský navazující 1 ročník, zimní semestr, povinný

Typ (způsob) výuky

 

Přednáška

26 hod., nepovinná

Vyučující / Lektor

Ing. Pavel Šiler, Ph.D.

Osnova

Syllabus of lectures
1) Introduction to instrumental analysis, classification of methods, sample preparation (mechanical operations, melting), definition of basic terms and basic characterization of physical properties of a sample as a method of granulometry (sieve analysis, laser diffraction), determination of specific surface (BET, Blaine), porosimetry, determination of thermal conductivity coefficient
2) Measurement of mechanical properties (tensile test, measurement of flexural and compressive strength, hardness, microhardness) and rheology (measurement of flow properties and viscosity)
3) Introduction to spectrometric methods and UV / VIS spectroscopy
4) IR and Raman spectroscopy
5) AAS, ICP OES, ICP MS, mass spectrometry, ion chromatography
6) Light microscopy
7) Confocal microscopy, STM, AFM
8) Electron microscopy (SEM, TEM and FIB)
9) Nuclear mgnetic resonance (NMR)
10) Utilization of X-ray radiation and X-ray fluorescence (XRF)
11) X-ray diffraction (XRD)
12) Photoelectron Spectroscopy (XPS)
13) Thermal analysis (TG, DTA, DSC), heat microscope, calorimetry

Syllabus of practical exercises
1) Familiarization with work safety, course conditions and division into working groups.
2) Sample preparation (grinding, particle size determination, melting)
3 (Mechanical properties (tensile test, determination of flexural and compressive strength)
4) UV/VIS
5) IR
6) Raman spectrometry
7) ICP
8) SEM + sample preparation for SEM
9) XRF
10) XRD
11) XPS
12) DTA and heat microscope
13) Isothermal and isoperibolic calorimetry

Konzultace v kombinovaném studiu

26 hod., nepovinná

Vyučující / Lektor

doc. Ing. Tomáš Opravil, Ph.D.

Laboratorní cvičení

52 hod., povinná

Vyučující / Lektor

Ing. Jiří Švec, Ph.D.
Ing. Matěj Březina, Ph.D.
Ing. Jan Hajzler
doc. Ing. Pavel Diviš, Ph.D.
Ing. Pavel Šiler, Ph.D.
Ing. Michal Marko
Ing. Vlastimil Bílek, Ph.D.
Ing. Radoslav Novotný, Ph.D.
Ing. Jiří Másilko, Ph.D.
Ing. Jakub Palovčík

Elearning

eLearning: aktuální otevřený kurz