Vysoké učení technické v Brně - Vnitřní projekty VUT

- plně financující (2014-01-01 - 2015-12-31)

FSI-S-14-2211

čeština

Juračka Jaroslav, doc. Ing., Ph.D. - hlavní řešitel
Cejpek Jakub, Ing., Ph.D. - spoluřešitel
Hlinka Jiří, doc. Ing., Ph.D. - spoluřešitel
Janhuba Luboš, Ing., Ph.D. - spoluřešitel
Jebáček Ivo, doc. Ing., Ph.D. - spoluřešitel
Koštial Rostislav, Ing., Ph.D. - spoluřešitel
Koutník Tomáš, Ing. - spoluřešitel
Lajza Ondřej, Ing., Ph.D. - spoluřešitel
Pejchar Jan, Ing. - spoluřešitel
Popela Robert, Ing., Ph.D. - spoluřešitel
Weis Martin, Ing. - spoluřešitel

Letecký ústav
- interní (01.01.2014 - 31.12.2016)
Fakulta strojního inženýrství
- příjemce (01.01.2014 - 31.12.2016)

KOŠTIAL, R. SUMMARY OF ANTI-ICING/DE-ICING SYSTEMS PATENTS. Brno: 2014.
Detail

Eva Josth Adamova, Pavel Klang, Jan Kubalcik, Petr Casek. Initial STM performance evaluation - preliminary results. 2015.
Detail

BEKETOVA, G.; SHEVTSOVA, M.; SYMONOV, V. Comparison of Hybrid Metal-Composite Micropin Joints with Conventional Ones in terms of Fatigue Life. In Engineering Mechanics 2015. Trans Tech Publications Inc.: Trans Tech Publications Inc., 2015. p. 479-485. ISBN: 978-3-03835-700-1.
Detail

KATRŇÁK, T.; JURAČKA, J. Detailed topometry FEM optimization of wing structural panel. Applied Mechanics and Materials, 2015, vol. 821, no. 821, p. 357-363. ISSN: 1662-7482.
Detail

CEJPEK, J.; WEIS, M.; JURAČKA, J. Acoustic Emission Localization in Testing of Composite Structures. Applied Mechanics and Materials, 2015, vol. 821, no. 821, p. 405-411. ISSN: 1662-7482.
Detail

KOUTNÍK, T.; DOUPNÍK, P. Validation Task for Solution of Optimal Slotted Flap Position Using FLUENT Software. Applied Mechanics and Materials, 2015, vol. 821, no. 821, p. 10-15. ISSN: 1662-7482.
Detail

BEKETOVA, G.; SHEVTSOVA, M.; SYMONOV, V. Comparison of Hybrid Metal-Composite Micropin Joints with Conventional Ones in terms of Fatigue Life. Svratka, ČR: 2015.
Detail

SYMONOV, V.; JURAČKA, J.; LÖFFELMANN, F. Comparison of MSC.Software Failure Models MAT8A, MATD054, and MATD058 of Composite Materials. MECHANICS OF COMPOSITE MATERIALS, 2018, vol. 54, no. 55, p. 591-604. ISSN: 0191-5665.
Detail

CEJPEK, J. Simulation o leading edge heating system. Letecký ústav, VUT v Brně: 2015. p. 1-15.
Detail

KOŠTIAL, R. PŘEHLED A POPIS ZKOUŠEK VZORKŮ ANTI-ICING SYSTÉMU V KLIMATICKÉ KOMOŘE. 2016.
Detail

KOŠTIAL, R. VYHODNOCENÍ ZKOUŠEK ANTI-NÁMRAZOVÉHO SYSTÉMU. 2016.
Detail

Petr Casek, Honeywell; Jan Kubalcik, Honeywell; Pavel Klang, Honeywell; Christian Aveneau, DSNA;. Technical Validation Plan of ACAS Xa. 2014.
Detail

Eva Adamová, Petr Cásek. Operational requirements, assumptions and scenarios for GA in European environment. SESAR Joint Undertaking, 2014.
Detail

Eva Josth Adamova, Pavel Klang. STM Technical Specifications – issue 3. SESAR Joint Undertaking, 2016.
Detail

Silvie Luisa Brazdilova, Eva Adamova. Comparison study of TSAA and ACAS-X performance. SESAR Joint Undertaking, 2015.
Detail

Petr Casek, Eva Adamova, Jan Kubalcik, Pavel Klang. Technical Validation Plan of ACAS Xa. SESAR Joint Undertaking, 2014.
Detail

Jan Kubalcik, Eva Adamova, Pavel Klang. Validation Report (VALR) from Initial STM Performance Evaluation. SESAR Joint Undertaking, 2015.
Detail

Jan Kubalcik, Pavel Klang, Eva Josth Adamova. VALR from ACAS-Xa technical validation. SESAR JU, 2016.
Detail

Eva Adamova. Validation Plan (VALP) for 2016 validation of ACAS Xa. SESAR JU, 2015.
Detail

Eva Adamova. SESAR Project 9.47 - TCAS evolution. 2015.
Detail

Eva Adamova. Support to standardization activities report. 2016.
Detail

Eva Adamova, Petr Casek. Technical feedback on proposed TCAS changes. SESAR JU, 2013.
Detail

SYMONOV, V.; POPELA, R.; HLINKA, J.; JEBACEK, I. Composite Wing Leading Edge Design: Technical Specification. 2014. p. 1-13.
Detail