GA15-23274S

čeština

Kaiser Jozef, prof. Ing., Ph.D. - hlavní řešitel

Ústav fyzikálního inženýrství
- odpovědné pracoviště (1.1.2015 - nezadáno)
Ústav fyzikálního inženýrství
- příjemce (1.1.2015 - 31.12.2017)

ZIKMUND, T.; ŠALPLACHTA, J.; ZATOČILOVÁ, A.; BŘÍNEK, A.; PANTĚLEJEV, L.; ŠTĚPÁNEK, R.; KOUTNÝ, D.; PALOUŠEK, D.; KAISER, J. Computed tomography based procedure for reproducible porosity measurement of additive manufactured samples. NDT & E INTERNATIONAL, 2019, vol. 103, no. 1, p. 111-118. ISSN: 1879-1174.
Detail

VRÁBEL, J.; POŘÍZKA, P.; KLUS, J.; PROCHAZKA, D.; NOVOTNÝ, J.; KOUTNÝ, D.; PALOUŠEK, D.; KAISER, J. Classification of materials for selective laser melting by laser-induced breakdown spectroscopy. Chemical Papers, 2019, vol. 1, no. 10, p. 2897-2905. ISSN: 1336-9075.
Detail

PALOUŠEK, D.; KOČICA, M.; PANTĚLEJEV, L.; KLAKURKOVÁ, L.; ČELKO, L.; KOUTNÝ, D.; KAISER, J. SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr. RAPID PROTOTYPING JOURNAL, 2019, vol. 25, no. 2, p. 266-276. ISSN: 1355-2546.
Detail

KOUTNÝ, D.; PALOUŠEK, D.; PANTĚLEJEV, L.; TĚŠICKÝ, L.; KAISER, J. Influence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting. Materials, 2018, vol. 11, no. 2, p. 1-18. ISSN: 1996-1944.
Detail

KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P.; PALOUŠEK, D.; PANTĚLEJEV, L. Analysis of fatigue processes of SLM materials by acoustic emission. International Journal of Microstructure and Materials Properties, 2018, vol. 17, no. 3, p. 193-205. ISSN: 1741-8410.
Detail

KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P.; PALOUŠEK, D. Fatigue Behaviour Evaluation of Additively and Conventionally Produced Materials by Acoustic Emission Method. In 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017. Procedia Structural Integrity. Funchal, Madeira, Portugal: Elsevier B.V., 2017. p. 393-400. ISSN: 2452-3216.
Detail

PANTĚLEJEV, L.; KOUTNÝ, D.; PALOUŠEK, D.; KAISER, J. Mechanical and microstructural properties of 2618 Al-alloy processed by SLM remelting strategy. In Metallography XVI. Materials Science Forum. Switzerland: Trans Tech Publications, 2017. p. 343-349. ISBN: 978-3-0357-1018-2. ISSN: 0255-5476.
Detail

KOUTNÝ, D.; PANTĚLEJEV, L.; TOMEŠ, J.; PALOUŠEK, D. COMPARISON OF SELECTIVE LASER MELTING OF 18NI MARAGING STEEL BY PXL AND M2 CUSING. MM Science Journal, 2016, vol. 2016, no. 6, p. 1590-1596. ISSN: 1803-1269.
Detail

VRÁNA, R.; KOUTNÝ, D.; PALOUŠEK, D.; ZIKMUND, T. Influence of Selective Laser Melting Process Parameters on Impact Resistance of Lattice Structure made from AlSi10Mg. In World PM2016 Proceedings. Hamburg, Germany: 2016. p. 1-6. ISBN: 978-1-899072-48-4.
Detail

KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P. ÚNAVOVÉ PROCESY V SELECTIVE LASER MELTING A KONVENČNĚ VYRÁBĚNÝCH MATERIÁLECH. In Defektoskopie 2016, NDE for Safety. první. Brno: Vysoké účení technické v Brně, ČNDT, 2016. s. 69-78. ISBN: 978-80-214-5422-4.
Detail

KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P. STUDY OF FATIGUE PROCESSES OF SELECTIVE LASER MELTING AND CONVENTIONAL PRODUCED MATERIALS. In 32nd European Conference on Acoustic Emission Testing. 1st edition. Brno: VUTIUM Brno, Brno University of Technology, 2016. p. 263-270. ISBN: 978-80-214-5386-9.
Detail

VLAŠIC, F.; KRATOCHVÍLOVÁ, V.; MAZAL, P.; PALOUŠEK, D.; KOUTNÝ, D. Fatigue Damage of Aluminium Alloy EN AW 2618A Produced by SLM Technology. In World PM2016 Proceedings. 2016. European Powder Metallurgy Associtation, 2016. p. 1-6. ISBN: 978-1-899072-48-4.
Detail

ZEMANOVÁ, L.; KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P. FATIGUE PROPERTIES OF EN AW-2618A ALUMINIUM ALLOY PRODUCED BY SELECTIVE LASER MELTING TECHNOLOGY. In Metal 2016. 1st. Tanger Ltd., 2016. p. 1583-1589. ISBN: 978-80-87294-66-6.
Detail

KRATOCHVÍLOVÁ, V.; ZEMANOVÁ, L.; VLAŠIC, F.; MAZAL, P. Study of Initial Stages of Fatigue Process in Selective Laser Melting Material Using Acoustic Emission Method. Solid State Phenomena, 2016, no. 258, p. 477-480. ISSN: 1662-9779.
Detail

POŘÍZKA, P.; KLUS, J.; HRDLIČKA, A.; VRÁBEL, J.; ŠKARKOVÁ, P.; PROCHAZKA, D.; NOVOTNÝ, J.; NOVOTNÝ, K.; KAISER, J. Impact of Laser-Induced Breakdown Spectroscopy data normalization on multivariate classification accuracy. Journal of Analytical Atomic Spectrometry, 2017, vol. 32, no. 2, p. 277-288. ISSN: 1364-5544.
Detail

ZATOČILOVÁ, A.; ZIKMUND, T.; KAISER, J.; PALOUŠEK, D.; KOUTNÝ, D. Measurement of the porosity of additive-manufactured Al-Cu alloy using x-ray computed tomography. In 8th International Conference on Materials Structure and Micromechanics of Fracture, MSMF8; Brno; Czech Republic; 27 July 2016 through 29 July 2016; Code 188189. Solid State Phenomena. 2016. p. 448-451. ISBN: 9783038356264. ISSN: 1662-9779.
Detail

POŘÍZKA, P.; KLUS, J.; PROCHAZKA, D.; VÍTKOVÁ, G.; BRADA, M.; NOVOTNÝ, J.; NOVOTNÝ, K.; KAISER, J. Assessment of the most effective part of echelle laser-induced plasma spectra for further classification using Czerny-Turner spectrometer. Spectrochimica Acta Part B, 2016, vol. 124, no. 1, p. 116-123. ISSN: 0584-8547.
Detail

VRÁNA, R.; KOUKAL, O.; KOUTNÝ, D.; PALOUŠEK, D.; KREJČÍ, P. Device for Testing Impact Resistance of Lattice Structures Panels Produced by the Selective Laser Melting. In Machine Design: 56th International Conference of Machine Design Departments. 2015. ISBN: 978-3-639-66914-5.
Detail

POŘÍZKA, P.; KLUS, J.; PROCHAZKA, D.; KÉPEŠ, E.; HRDLIČKA, A.; NOVOTNÝ, J.; NOVOTNÝ, K.; KAISER, J. Laser-Induced Breakdown Spectroscopy coupled with chemometrics for the analysis of steel: The issue of spectral outliers filtering. Spectrochimica Acta Part B, 2016, vol. 123, no. 1, p. 114-120. ISSN: 0584-8547.
Detail

KLUS, J.; MIKYSEK, P.; PROCHAZKA, D.; POŘÍZKA, P.; PROCHAZKOVÁ, P.; NOVOTNÝ, J.; TROJEK, T.; NOVOTNÝ, K.; SLOBODNÍK, M.; KAISER, J. Multivariate approach to the chemical mapping of uranium in sandstone-hosted uranium ores analyzed using double pulse Laser-Induced Breakdown Spectroscopy. Spectrochimica Acta Part B, 2016, vol. 123, no. 1, p. 143-149. ISSN: 0584-8547.
Detail

Odpovědnost: Kaiser Jozef, prof. Ing., Ph.D.