Stress test of pilot unit for removal of VOCs and CO by catalytic oxidation

článek ve sborníku ve WoS nebo Scopus

angličtina

The pilot fixed bed catalytic oxidation unit was installed in Momentive Specialty Chemicals manufacturing site in Sokolov, Czech Republic. The aim of pilot testing was to give accuracy to operational and economic parameters of an eventual future full-scale unit for removal of VOC and CO from the waste off-gas and for the effectiveness verification of catalytic oxidation. The stress test was carried out at the pilot unit of catalytic oxidation. Various characteristics of reactor during its gradual overloading up to the maximum achievable flow rate at full opening of the input valve of processed PVG off-gas were investigated. At the maximum load, the outlet temperature 593.0 degC was reached, which is acceptable for the oxidation catalyst used. The lowest removal efficiency achieved for VOC was 96.89 % and 97.77 % for CO, respectively.

VOC, CO, catalytic oxidation, pilot unit, stress test

BRUMMER, V.; JECHA, D.; MARTINEC, J.; SKRYJA, P.

2013

25. 6. 2013

978-91-637-2150-2

Abstract Book - 6th European combustion meeting

P1-77 1

P1-77 6

6