Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
BERTOLLA, L. DLOUHÝ, I. ŘEHOŘEK, L. CHLUP, Z.
Originální název
Tensile properties of open cell ceramic foams
Typ
článek v časopise - ostatní, Jost
Jazyk
angličtina
Originální abstrakt
Full understanding of response of highly porous (cellular) ceramic foams to different mechanical loadingconditions is important because of their potential use in industry, medical and other applications. A new technique for testing tensile strength of ceramic foam materials has been developed and first knowledge is described in the paper. Testing procedure consists of fixation of ceramic foam into aluminium pots by suitable adhesive. Alumina based ceramic foam material produced by Lanik (CZ) was used for the test methodology development. Samples were produced by polyurethane foam replication technique. Foams having 10 and 60 pores per linear inch (PPI) were tested. Basic fractographic analysis was carried out by scanning electron microscopy (SEM) to get corresponding figure about specimen behaviour during tensile loading. Influence of increasing PPI (decreasing cell size) on tensile strength of specimens was experimentally proven. With increasing PPI the tensile strength decreases. Slight dependence of tensile strength on sample size of examined material was observed in the range of the tested specimen dimensions. PDLLA-coated samples were alsoproduced and tested, exhibiting nearly 10 times higher tensile strength.
Klíčová slova
tension test, cellular materials, ceramics
Autoři
BERTOLLA, L.; DLOUHÝ, I.; ŘEHOŘEK, L.; CHLUP, Z.
Rok RIV
2013
Vydáno
23. 3. 2013
Nakladatel
Hutnícka fakullta Technickej univerzity v Košiciach a SAV Košice
Místo
Košice
ISSN
1338-1660
Periodikum
Acta metalurgica slovaca
Ročník
2013(3)
Číslo
1
Stát
Slovenská republika
Strany od
106
Strany do
113
Strany počet
8
BibTex
@article{BUT101125, author="Luca {Bertolla} and Ivo {Dlouhý} and Lukáš {Řehořek} and Zdeněk {Chlup}", title="Tensile properties of open cell ceramic foams", journal="Acta metalurgica slovaca", year="2013", volume="2013(3)", number="1", pages="106--113", issn="1338-1660" }