Water jet cooling of aluminium alloy

článek ve sborníku ve WoS nebo Scopus

angličtina

Jet cooling is used in many industrial applications. A typical application is the ingot casting process. Cooling water flows into a mold, where it is distributed through a system of channels into holes that are spaced very closely together. For better homogenization, the water flows from the leading edge and then impacts the surface of an aluminum ingot. [1] To obtain realistic results from numerical simulations, it is necessary to know the boundary conditions for each cooling scenario. It is not possible to use analytic solutions or multiphysics simulation software to obtain realistic heat transfer coefficient (HTC) curves which represent the cooling intensity. Boundary conditions can be obtained by experimentally reproducing the same conditions in the laboratory and measuring temperature dependence over time. Evaluating the data is done using the inverse task, which calculates the surface temperature and HTC. Temperatures are measured using shielded thermocouples which are installed very close to the sample surface. The final goal of this work is to experimentally investigate the cooling intensity during the casting process of ingots. Two types of cooling regime - continuous and pulse and changing the amount of cooling water were studied. The HTC curves from the calculated surface temperature data are used as boundary conditions for a numerical model which can simulate temperature distribution inside the ingot during the cooling process.

aluminum casting process, heat transfer coefficient, inverse task, thermocouples

GUZEJ, M.; BARTULI, E.; KRIŠTOF, O.

2015

3. 6. 2015

TANGER Ltd.

Ostrava

978-80-87294-58-1

METAL 2015, 24rd International Conference on Metallurgy and Materials, Conference Proceedings

1439

1444

6