Přístupnostní navigace
E-přihláška
Vyhledávání Vyhledat Zavřít
Detail publikace
KVAPIL, J. POHANKA, M. HORSKÝ, J.
Originální název
Estimation of the Thermal Contact Conductance From Unsteady Temperature Measurements
Typ
článek v časopise ve Web of Science, Jimp
Jazyk
angličtina
Originální abstrakt
Thermal contact conductance is an important parameter for describing the heat transfer between two bodies. When two solids are put in contact and heat transfer occurs, a temperature drop is observed at the interface between the solids. This is caused by an imperfect joint, which occurs because the real surfaces are not perfectly smooth and flat. This paper describes an experimental device for the evaluation of the thermal contact conductance, which was designed and fabricated in the Heat Transfer and Fluid Flow Laboratory. This device was built mainly for simulating metal-forming conditions, which include high pressures (up to 360 MPa) and high temperatures (up to 1200 degC) in the contact of two solids. The principle of this investigation is the unsteady measurement of the temperatures of two solids that are put in contact under different conditions. The surface temperature and thermal contact conductance can be calculated from the measured temperatures by an inverse heat-transfer task. The measured temperature history and the calculated values of the thermal contact conductance for pilot tests are presented in this paper.
Klíčová slova
thermal contact conductance, inverse heat conduction problem, heat-transfer coefficient
Autoři
KVAPIL, J.; POHANKA, M.; HORSKÝ, J.
Rok RIV
2015
Vydáno
1. 4. 2015
Nakladatel
Institute of Metals and Technology
Místo
Ljubljana, Slovinsko
ISSN
1580-2949
Periodikum
Materiali in tehnologije
Ročník
49
Číslo
2
Stát
Slovinská republika
Strany od
219
Strany do
222
Strany počet
4
URL
http://mit.imt.si/Revija/izvodi/mit152/kvapil.pdf
BibTex
@article{BUT114837, author="Jiří {Kvapil} and Michal {Pohanka} and Jaroslav {Horský}", title="Estimation of the Thermal Contact Conductance From Unsteady Temperature Measurements", journal="Materiali in tehnologije", year="2015", volume="49", number="2", pages="219--222", doi="10.17222/mit.2013.238", issn="1580-2949", url="http://mit.imt.si/Revija/izvodi/mit152/kvapil.pdf" }