Detail publikace

Tribological Performance of Ti-Si-Based in Situ Composites

TKACHENKO, S. NEČAS, D. DATSKEVICH, O. ČUPERA, J. SPOTZ, Z. VRBKA, M. KULAK, L. FORET, R.

Originální název

Tribological Performance of Ti-Si-Based in Situ Composites

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

In this study, a series of Ti−Si based in situ composites was manufactured by means of a common argon arc melting technique and tribologically evaluated using a sliding ball-on-disc tester under simulated body fluid lubrication. The composite microstructure, mechanical properties and surface roughness were characterized using light and scanning electron microscopy (SEM), vertical scanning interferometry (VSI), X-ray diffraction analysis (XRD), and hardness measurements. The evolution of coefficients of friction (CsOF) and the appearance of contacting surfaces showed that two principal wear mechanisms were the mixed elastohydrodynamic lubrication (EHL), typically followed by abrasive wear. The mixed EHL was due to the combined effect of serum solution lubrication and surface irregularities, which were produced during the routine surface preparation of samples. The mixed EHL provided the absence of wear and low and stable coefficients of friction, which did not depended on phase composition, microstructure or hardness of Ti−Si based alloys. However, in most cases the change of contact geometry led to the transition from the mixed EHL to the conventional boundary lubrication, accompanied by increased and unstable friction, adhesive material transfer of metal to the ceramic counterbodies and abrasive wear. In this respect, the low wear resistance and high adhesion affinity of the titanium matrix of Ti−Si based alloys should be improved.

Klíčová slova

Titanium; silicon; in situ composite; wear; friction

Autoři

TKACHENKO, S.; NEČAS, D.; DATSKEVICH, O.; ČUPERA, J.; SPOTZ, Z.; VRBKA, M.; KULAK, L.; FORET, R.

Rok RIV

2015

Vydáno

8. 4. 2016

Nakladatel

Taylor & Francis

ISSN

1040-2004

Periodikum

TRIBOLOGY TRANSACTIONS

Ročník

59

Číslo

2

Stát

Spojené státy americké

Strany od

340

Strany do

351

Strany počet

12

URL

BibTex

@article{BUT115676,
  author="TKACHENKO, S. and NEČAS, D. and DATSKEVICH, O. and ČUPERA, J. and SPOTZ, Z. and VRBKA, M. and KULAK, L. and FORET, R.",
  title="Tribological Performance of Ti-Si-Based in Situ Composites",
  journal="TRIBOLOGY TRANSACTIONS",
  year="2016",
  volume="59",
  number="2",
  pages="340--351",
  doi="10.1080/10402004.2015.1079347",
  issn="1040-2004",
  url="http://www.tandfonline.com/doi/abs/10.1080/10402004.2015.1079347#.VdxUuPntlBe"
}