Detail publikace

Effects of specimen size and crack depth ratio on calibration curves for modified compact tension specimens

SEITL, S. VISZLAY, V. CIFUENTES, H. CANTELI, A.

Originální název

Effects of specimen size and crack depth ratio on calibration curves for modified compact tension specimens

Typ

článek v časopise - ostatní, Jost

Jazyk

angličtina

Originální abstrakt

The compact tension (CT) test is frequently used to determine fracture properties of metallic materials, such as fracture energy, fracture toughness, crack propagation rate and J-R curves. In the case of cement based composites, a modified compact tension (MCT) specimen can be advantageously used due to the negligible stress concentration arising around the pulling dowel pins during the test. In this work, finite element calculations are used to determine the calibrations curves for the stress intensity factor K, COD, CMOD and CMOD(4), needed for an accurate determination of the fracture parameters, as a function of the ratio a/W. Nominal diameters are selected according to the used core bits between 50 mm and 300 mm.

Klíčová slova

Modified compact tension test, fracture, concrete, core drill, stress intensity factor, compliance expressions, finite element simulation

Autoři

SEITL, S.; VISZLAY, V.; CIFUENTES, H.; CANTELI, A.

Rok RIV

2015

Vydáno

15. 12. 2015

Místo

Ostrava, Česká republika

ISSN

1210-0471

Periodikum

Transaction of the VŠB-Technical university of Ostrava, Mechanical series

Ročník

15

Číslo

2

Stát

Česká republika

Strany od

1

Strany do

10

Strany počet

10

BibTex

@article{BUT120910,
  author="Stanislav {Seitl} and Viliam {Viszlay} and Héctor {Cifuentes} and Alfonso Fernández {Canteli}",
  title="Effects of specimen size and crack depth ratio on calibration curves for modified compact tension specimens",
  journal="Transaction of the VŠB-Technical university of Ostrava, Mechanical series",
  year="2015",
  volume="15",
  number="2",
  pages="1--10",
  issn="1210-0471"
}