Detail publikace

Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Enviromental Barier Coatings

ČELKO, L. JECH, D. DVOŘÁK, K. ROČŇÁKOVÁ, I. MONTUFAR JIMENEZ, E. SLÁMEČKA, K. KLAKURKOVÁ, L.

Originální název

Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Enviromental Barier Coatings

Typ

abstrakt

Jazyk

angličtina

Originální abstrakt

In order to support further research and development in the field of Environmental Barrier Coatings (EBCs), Barium-Magnesium-Aluminium-Silicate (BMAS) was studied as a potentially promising representative of a wide family of silicate materials. BMAS powder was produced prom 15wt%BaO, 7wt%MgO, 28wt% Al2O3 and 500wt% SiO2. The raw mix was fired in a muffle furnace by optimized firing regime of 1200°C/3hour. The final product was crushed in the ball milling device down to the fraction of 20-45 micrometers. The atmospheric plasma spray (APS) technique was used to deposit the BMAS coating on a grit-blasted steel sheet substrate. With the aim to obtain the most suitable technological parameters for the spraying process, parameters recommended for pure alumina (Al2O3), yttria stabilized zirconia (YSZ), as well as several experimentally designed ones were tested. Opto-digital microscope and digital image analysis were used to evaluate the microstructure (the thickness and the areal porosity were also measured) and X-ray diffraction technique was utilized to identify the phases formed in the as-sprayed coatings.

Klíčová slova

powder processing; thermal spraying; enviromental barrier coating; silicate; microscopy

Autoři

ČELKO, L.; JECH, D.; DVOŘÁK, K.; ROČŇÁKOVÁ, I.; MONTUFAR JIMENEZ, E.; SLÁMEČKA, K.; KLAKURKOVÁ, L.

Vydáno

19. 4. 2016

Nakladatel

Faculty of Metallurgy Technical University of Košice

Místo

Košice

ISBN

978-80-553-2547-7

Kniha

Metallography ´16

Číslo edice

1

Strany od

136

Strany do

136

Strany počet

1

BibTex

@misc{BUT127043,
  author="Ladislav {Čelko} and David {Jech} and Karel {Dvořák} and Ivana {Ročňáková} and Edgar Benjamin {Montufar Jimenez} and Karel {Slámečka} and Lenka {Klakurková}",
  title="Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Enviromental Barier Coatings",
  booktitle="Metallography ´16",
  year="2016",
  edition="1",
  pages="136--136",
  publisher="Faculty of Metallurgy Technical University of Košice",
  address="Košice",
  isbn="978-80-553-2547-7",
  note="abstract"
}