Detail publikace

Polymer-silicate composite based on alternative raw materials under conditions of increased temperature

MELICHAR, T. BYDŽOVSKÝ, J.

Originální název

Polymer-silicate composite based on alternative raw materials under conditions of increased temperature

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The paper presents research into studying the properties of composite materials with polymer-silicate matrix and porous (lightweight) filler. Specifically, the matrix based on cement substituted by 35% of alternative raw material was considered. In case of filler aggregate based sintered ash was used. Investigated materials were exposed at high temperatures. Thermal loading took place gradually in temperature increments of 22 °C (reference conditions), 400, 600, 800 and 1000 °C with subsequent controlled cooling. Attention was also focused on various ways of cooling – slow in the furnace (1 °C/min) and immersion in water (bath temperature c. 18 °C). Suitability of matrix modification and use of porous fillers based on alternative raw materials was proved by set of analyses. After exposure in an environment with a temperature of 1000 °C followed by quench cooling was set residual compressive strength of about 40%, which is relatively high for this type of the matrix. The curves of residual strength with different types of cooling are intriguing too. Selected samples were also investigated by using micro/structural techniques, where the emphasis was placed on the formation of any defects related.

Klíčová slova

Composite, extreme, temperature, regime, cooling.

Autoři

MELICHAR, T.; BYDŽOVSKÝ, J.

Vydáno

3. 8. 2016

Nakladatel

Elsevier

Místo

Nizozemsko

ISBN

978-1-5108-2855-1

Kniha

Ecology and New Building Materials and Products

ISSN

1877-7058

Periodikum

Procedia Engineering

Ročník

151

Číslo

1

Stát

Nizozemsko

Strany od

375

Strany do

382

Strany počet

8

URL

https://www.sciencedirect.com/science/article/pii/S1877705816317866

Plný text v Digitální knihovně

http://hdl.handle.net/11012/204204

BibTex

@inproceedings{BUT127078,
  author="Tomáš {Melichar} and Jiří {Bydžovský}",
  title="Polymer-silicate composite based on alternative raw materials under conditions of increased temperature",
  booktitle="Ecology and New Building Materials and Products",
  year="2016",
  journal="Procedia Engineering",
  volume="151",
  number="1",
  pages="375--382",
  publisher="Elsevier",
  address="Nizozemsko",
  doi="10.1016/j.proeng.2016.07.398",
  isbn="978-1-5108-2855-1",
  issn="1877-7058",
  url="https://www.sciencedirect.com/science/article/pii/S1877705816317866"
}