Detail publikace

Fracture parameters of fine-grained composites based on the alkali-activated slag

BÍLEK, V. ŠIMONOVÁ, H. KUCHARCZYKOVÁ, B. KOCÁB, D. KERŠNER, Z.

Originální název

Fracture parameters of fine-grained composites based on the alkali-activated slag

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

The paper deals with the experimental determination of fracture parameters of the composites based on the alkali-activated slag (AAS) at different ages. The main aim of the experimental investigation was to verify the effect of the addition of shrinkage reducing admixture (SRA) on the overall progress of length changes and fracture properties during AAS composites ageing. Two AAS composites, which differed only in the presence of SRA, were prepared for the purpose of experiments. The mechanical fracture parameters were determined using evaluation of fracture tests carried out on 40 × 40 × 160 mm beam specimens with an initial central edge notch. The monitored parameters were modulus of elasticity, effective fracture toughness and specific fracture energy. These parameters were determined at the age of 3, 28 and 90 days. The obtained results are supplemented by the results of relative length changes measurements performed on both studied composites.

Klíčová slova

fracture, alkali activation, slag, composite, shrinkage reducing admixture

Autoři

BÍLEK, V.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; KOCÁB, D.; KERŠNER, Z.

Vydáno

12. 7. 2018

Nakladatel

IOP Publishing

Místo

Bristol

ISSN

1757-8981

Periodikum

IOP Conference Series: Materials Science and Engineering

Ročník

379

Číslo

1

Stát

Spojené království Velké Británie a Severního Irska

Strany od

1

Strany do

7

Strany počet

7

URL

Plný text v Digitální knihovně

BibTex

@inproceedings{BUT148835,
  author="Vlastimil {Bílek} and Barbara {Kucharczyková} and Hana {Šimonová} and Dalibor {Kocáb} and Zbyněk {Keršner}",
  title="Fracture parameters of fine-grained composites based on the alkali-activated slag",
  booktitle="International Conference Building Materials, Products and Technologies",
  year="2018",
  journal="IOP Conference Series: Materials Science and Engineering",
  volume="379",
  number="1",
  pages="1--7",
  publisher="IOP Publishing",
  address="Bristol",
  doi="10.1088/1757-899X/379/1/012018",
  issn="1757-8981",
  url="http://iopscience.iop.org/article/10.1088/1757-899X/379/1/012018"
}